Rob you turned a light on.......my mixture control is set at full rich. I'll adjust the mixture control cable to lean a few turn and see if the leak stops. I have it set at full rich. I cannot turn it any further to rich....dah! On Monday, April 21, 2014 8:51 AM, "danrh at windstream.net" <danrh at windstream.net> wrote:
That's because that is what a POSA does, LEAK. On Monday, April 21, 2014 8:18 AM, cruzj12 at frontiernet.net wrote: ============= My VW runs good but I have a gas leak dripping when I open the fuel valve.So I shut it off after a few seconds to start it then back on after she fires up. Is there an bad "O" ring I missed or just another process of adustment on the needle to stop the leak? _______________________________________________ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org please see other KRnet info at http://www.krnet.org/info.html see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.orgto change options _______________________________________________ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org please see other KRnet info at http://www.krnet.org/info.html see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.orgto change options
