That will work if you have one long enough, but you need something like a half inch long.
-------- Original Message -------- Subject: Re: KR> KRnet Digest, Vol 2, Issue 84 From: <laser147 at juno.com> List-Post: krnet@list.krnet.org Date: Mon, March 31, 2014 11:31 am To: krnet at list.krnet.org "I use a piece of appropriately sized stainless welding rod and have used a paperclip in a pinch although you really need a little bigger diameter." Steve Bennett suggests a 3/32" pop rivet in lieu of the factory pin. Mike KSEE ____________________________________________________________ Do THIS before eating carbs (every time) 1 EASY tip to increase fat-burning, lower blood sugar & decrease fat storage http://thirdpartyoffers.juno.com/TGL3141/5339b4b03355334af22d2st04vuc _______________________________________________ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org please see other KRnet info at http://www.krnet.org/info.html see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options
