You can find Slick overhaul manuals online if you search. Not sure about the 4220 manual, but you can find them on the 4300 series and they work the same.
There is a pin that goes from the distributer housing through the hole in the big gear that aligns it with the #1 position. I use a piece of appropriately sized stainless welding rod and have used a paperclip in a pinch although you really need a little bigger diameter. The gear on the side that has the coil is aligned with another tool. Look at the picture in the manual and you will see how it is done. Once you see how it aligns you can eyeball it if you don't have the tool. Slick mags are very easy to work on, much easier than Bendix to align. -------- Original Message -------- Subject: KR> Slick mag From: Eric James Pitts <eric.pitts at frontier.com> List-Post: krnet@list.krnet.org Date: Sun, March 30, 2014 5:37 pm To: K Rnet <krnet at list.krnet.org> Slick model 4220 magneto timing, do the two internal gears need to be timed? See attached photo Eric Pitts Terre Haute, Ind. "Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well preserved body, but rather to skid in sideways, chocolate in one hand, body thoroughly used up, totally worn out and screaming "WOO HOO what a ride!"_______________________________________________ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org please see other KRnet info at http://www.krnet.org/info.html see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options
