Sent from my HTC on the Now Network from Sprint!
----- Reply message ----- From: "Bob Lee" <flyboybob1 at gmail.com> List-Post: krnet@list.krnet.org Date: Thu, Jan 30, 2014 6:43 am Subject: KR> Pressure testing my wing tanks To: "'KRnet'" <krnet at list.krnet.org> Pierre said: << "...so I hooked up the compressor,blocked off all the inlet, breather and other openings, prepared the little water spray can and started the compressor." >> I was a little luckier than Pierre, when I built my header tank I got better advise: Use a tee going into the tank. On one side place a baloon and on the other side place the compressor. That way, the baloon will limit the pressure in the tank and you won't distort it with the pressure. Regards, Bob Lee KR-2, 90% done only 68% to go! Suwanee, GA USA _______________________________________________ Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org please see other KRnet info at http://www.krnet.org/info.html see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options
