Woh, now there's something I missed. In all my perusing of the plans and the build guide I hadn't noticed the floor extending back past the main spar. I'm at the point of fitting my centre section spars so I'm glad this came up. KRNet saves the day - again!
Cheers, Tony On 13 January 2014 11:52, Mark Langford <ml at n56ml.com> wrote: > Do you mean 5/8" crossmember? And the 3/32" plywood shouldn't just end > there, it should be scarfed to another piece or two so that there's a > continuous floor all the way to the tail. Ideally I'd run the ply wood > full length until it ends way back behind the cabin, then scarf on more to > finish it, but I'm not sure that the plans differentiate that. > > Floor installation is prior to spar installation. Most of us would > shudder at the thought of stepping on the floor anyway...I'm not sure you > CAN stand up on the floor. We enter, stand on the seat, drop ourselves > down, and don't put much force on the floor... > > Mark Langford > ML at N56ML.com > website at http://www.N56ML.com <http://www.n56ml.com/> > -------------------------------------------------------- > > _______________________________________________ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org > please see other KRnet info at http://www.krnet.org/info.html > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options >
