It waxed and rubbed out just fine. The guy in the hanger next to me owns a composites shop and I just followed his recommendations.
Jeff Lange Race 64 - Skye Racer Blog: http://schmleff.blogspot.com Youtube Channel: https://www.youtube.com/schmleff On Jul 11, 2013, at 5:43 AM, "John Martindale" <john_martindale at bigpond.com> wrote: > How could you possibly rub and polish the recommended three layers of wax on > top of the PVA without literally tearing it to pieces. When dry it's only > the thickness of a single layer of onion. > > John Martindale > 29 Jane Circuit > Toormina NSW 2452 > Australia > > ph:61 2 6658 4767 > m:0403 432179 > email:john_martindale at bigpond.com > web site: http://john-martindale-kr2.zxq.net > -----Original Message----- > From: KRnet [mailto:krnet-bounces at list.krnet.org] On Behalf Of Jeff Lange > Sent: Monday, 8 July 2013 2:16 AM > To: KRnet > Subject: Re: KR> release agent > > Brian, > > I supposed you could do it that way but the PVA would come off with the > finished part. I waxed on top of it and the final part was easily removed > with the PVA remaining attached to the plug. > > Jeff Lange > Race 64 - Skye Racer > Blog: http://schmleff.blogspot.com > Youtube Channel: https://www.youtube.com/schmleff > > On Jul 7, 2013, at 11:04 AM, <brian.kraut at eamanufacturing.com> wrote: > >> You are supposed to wax and then PVA.....snip > > > _______________________________________________ > Search the KRnet Archives at http://tugantek.com/archmailv2-kr/search. > To UNsubscribe from KRnet, send a message to KRnet-leave at list.krnet.org > please see other KRnet info at http://www.krnet.org/info.html > see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change > options
