Don't know if anyone remembers my question about putting an aileron pulley inboard of the landing gear strut...I had to keep playing with it (always the engineer). Here's what I came up with. I had to remove the gear to drill the hole straight, but that gave me a really good angle to line the pulley up with the joystick. I think I'm going to be happy with this. It's just roughed in right now, but I pulled as hard as I could and the pulley didn't budge...which gives me a really good factor of safety (even for an engineer). I just hope I can do as well on the right hand side. I'm getting close to being able to foam and glass the upper surface...that will be a huge milestone. * * -------------- next part -------------- A non-text attachment was scrubbed... Name: aileron rigging 2.jpg Type: image/jpeg Size: 33361 bytes Desc: not available URL: <http://list.krnet.org/mailman/private/krnet_list.krnet.org/attachments/20130527/68b214a4/attachment.jpg> -------------- next part -------------- A non-text attachment was scrubbed... Name: aileron rigging 3.jpg Type: image/jpeg Size: 39096 bytes Desc: not available URL: <http://list.krnet.org/mailman/private/krnet_list.krnet.org/attachments/20130527/68b214a4/attachment-0001.jpg>
