Diego, Please file a bug report for this and include the board file that causes this so it's easier for us to figure out what is going on.
Thanks, Wayne On 7/27/19 5:06 AM, Diego Herranz wrote: > I've been testing this dialog and I think it is a nice addition. Thanks! > > There seems to be something wrong with the area calculation, though. See > image below: > area.png > > Thanks, > Diego > > On Tue, 23 Jul 2019 at 11:18, Ian McInerney <ian.s.mciner...@ieee.org > <mailto:ian.s.mciner...@ieee.org>> wrote: > > Alexander, > > Instead of declaring the 2 static variables separately, I would > suggest creating a struct for the settings then store that as the > static variable. For an example of this see the > dialog_create_array.cpp file. This way if any new options must be > added in the future, they can just be added to the struct very easily. > > -Ian > > On Mon, Jul 22, 2019 at 9:39 PM Alexander Shuklin <jasura...@mail.ru > <mailto:jasura...@mail.ru>> wrote: > > Damn ><, > don't use last patch, please. > It doesn't count total vias amount. Use this one. > > > Понедельник, 22 июля 2019, 22:14 +03:00 от Alexander Shuklin > <jasura...@mail.ru <mailto:jasura...@mail.ru>>: > > Hi, > thanks for sharing experience, as I never used that > translations or wxWidgets before. And I have no idea where > else could I get that information. )) > So, there's the patch with vias information and some tiny > improvements. > > > Понедельник, 22 июля 2019, 13:34 +03:00 от Ian McInerney > <ian.s.mciner...@ieee.org > <mailto:ian.s.mciner...@ieee.org>>: > > > > On Mon, Jul 22, 2019 at 11:03 AM Dino Ghilardi > <dino.ghila...@ieee.org > > <http://e.mail.ru/compose/?mailto=mailto%3adino.ghila...@ieee.org>> > wrote: > > Hi Alexander, > > One possible solution for the translation could be > put the ":" in a > different column of the table and right-align the > field description text > (so all the colons will be aligned). A rapid google > search shown that in > French and Vietnamese there should be a space before > the colon, while in > the rest of the world there is not, so having the > translation for the > ":" word seems to make sense. Also another question > arises: Is there > some language in which the colon should be another > character before the > word? (I'm thinking about spanish where the question > mark upside-down > appears before a question...)? ...conclusion: > keeping "Height:" and > "Height" as two different words seem to be the > solution that gives > maximum flexibility to translators. > > > This actually doesn't give them as much flexibility. > When translations are done, they need to examine the > entire string that needs translating, so the ":" > character should be included in the string. Separating > out the two portions is the equivalent of saying that > every lanugage will follow the same compositional rules. > > > Another possible solution (probably better then the > one above since it > just removes the problem) is to remove the ":" and > have the cell borders > in a different color, just like the tables in the > "board setup" dialog > (so that you can also take a look at that code to > solve also the color > problem seeing how it was solved there). The > advantage of this approach > is also having a more consistent "look" through all > the dialogs. > > > > P.S. (a little bit off-topic): > If you move the statistic window and check/uncheck > one of the checkboxes > ("subctract holes...." or "Exclude components...") > the window "jumps" to > the center of the screen (its default position on > open): do you have > also this behaviour or it is just on my debian-linux > with gtk3? > > > Cheers, > Dino. > > On 22/07/19 10:13, Alexander Shuklin wrote: > > Hi! > > I'll have a look to add vias count to dialog. > > There's some questions: > > > > 1)I don't have too much experience with wxdialogs. > There was commit on > > master, which says: > > >> remove settings for fg/bg color: the result is > unpredictable: was > > black texts on black background on my computer. > > And now I have all tables with data just in white > boxes. Is it how it > > meant to be, or just some misbehavior on different > systems? I use > > archlinux x64 OS. > > there's screenshot in attachment > > > > 2) Can we use something like _( "Height" ) + ":" > for translation, not _( > > "Height:" )? As far as I understand, now we will > need to have 2 > > translations, first for "Height" and second for > "Height:" but that's > > basically same word. > > > > Воскресенье, 21 июля 2019, 23:42 +03:00 от > Dino Ghilardi > > <dino.ghila...@ieee.org > > <http://e.mail.ru/compose/?mailto=mailto%3adino.ghila...@ieee.org>>: > > > > Makes sense. > > Instead of a generic "via count" a more > complete table similar to the > > one generated in the drill report file could > be useful, but may be it > > can became quite long if a lot of different > drill sizes are used (ok, > > scrollbars are made to handle that). > > Also having "vias", "blind vias" and > "microvias" count man make sense > > (or at least having something like "microvias > used: yes/no"), just to > > have in board statistics the information about > the need of an advanced > > pcb manufacturing process. > > > > > > Cheers, > > Dino. > > > > > > On 21/07/19 20:54, Mark Roszko wrote: > > > > Since making every hole in the pcb costs > time, manufacturers > > > calculate the price of the PCB using also > that number. > > > > > > A long time ago, holes cost alot. These > days if your manufacturer is > > > charging alot per hole, you should run far > away. Usually > > manufactuers > > > include 20k-40k holes in the base price per > panel before they start > > > charging you tiny penny amounts for more in > some increments of > > > thousands. The CNC machines these days as > blazing fast at making the > > > holes required and they charge more for the > drill bit being worn > > down > > > than the time. > > > > > > What does actually cost money is via type > and size. Blind vias make > > > layer stackups a pain in the butt and micro > vias needing lasers. > > > And also going below some via size can > significantly add cost > > even if > > > not at microvia size because it requires > different machines with > > more > > > precision and smaller drill bits. > > > > > > > > > If anything I would say to break down the > statistics based on via > > type. > > > > > > On Sun, Jul 21, 2019 at 1:55 PM Dino Ghilardi > > <dino.ghila...@ieee.org > > <http://e.mail.ru/compose/?mailto=mailto%3adino.ghila...@ieee.org> > <mailto:dino.ghila...@ieee.org > > <http://e.mail.ru/compose/?mailto=mailto%3adino.ghila...@ieee.org>> > > > <mailto:dino.ghila...@ieee.org > > <http://e.mail.ru/compose/?mailto=mailto%3adino.ghila...@ieee.org>>> > wrote: > > > > > > I just tried the board statistics dialog > and looks good, I like it. > > > > > > A thing I'd like to have to make it better > is adding the number > > of vias > > > to the statistics: Since making every hole > in the pcb costs time, > > > manufacturers calculate the price of the > PCB using also that number. > > > > > > Also the option to save or print a text > with the statistics report > > > would > > > be nice. > > > > > > > > > Cheers, > > > Dino. > > > > > > > _______________________________________________ > > Mailing list: > https://launchpad.net/~kicad-developers > > Post to : kicad-developers@lists.launchpad.net > > <http://e.mail.ru/compose/?mailto=mailto%3akicad%2ddevelop...@lists.launchpad.net> > > <mailto:kicad-developers@lists.launchpad.net > > <http://e.mail.ru/compose/?mailto=mailto%3akicad%2ddevelop...@lists.launchpad.net>> > > Unsubscribe : > https://launchpad.net/~kicad-developers > > More help : https://help.launchpad.net/ListHelp > > > > > > > > -- > > Alexander Shuklin > > > _______________________________________________ > Mailing list: https://launchpad.net/~kicad-developers > Post to : kicad-developers@lists.launchpad.net > > <http://e.mail.ru/compose/?mailto=mailto%3akicad%2ddevelop...@lists.launchpad.net> > Unsubscribe : https://launchpad.net/~kicad-developers > More help : https://help.launchpad.net/ListHelp > > > > -- > Alexander Shuklin > > > > -- > Alexander Shuklin > > _______________________________________________ > Mailing list: https://launchpad.net/~kicad-developers > Post to : kicad-developers@lists.launchpad.net > <mailto:kicad-developers@lists.launchpad.net> > Unsubscribe : https://launchpad.net/~kicad-developers > More help : https://help.launchpad.net/ListHelp > > > _______________________________________________ > Mailing list: https://launchpad.net/~kicad-developers > Post to : kicad-developers@lists.launchpad.net > Unsubscribe : https://launchpad.net/~kicad-developers > More help : https://help.launchpad.net/ListHelp > _______________________________________________ Mailing list: https://launchpad.net/~kicad-developers Post to : kicad-developers@lists.launchpad.net Unsubscribe : https://launchpad.net/~kicad-developers More help : https://help.launchpad.net/ListHelp
