A little more info. My KiCad build works fine on my laptop, which has both an
Intel and Nvidia graphics chip on its motherboard. The Nvidia framebuffer
device is using the nouveau driver.
In contrast, my desktop machine has to use an official driver supplied by
Nvidia, rather than nouveau, because nouveau doesn't work well with the GeForce
210 video card in my desktop machine.
It may be that there is an incompatibility between KiCad and the Nvidia driver,
at least as it pertains to my hardware.
One last thing - KiCad 4.0.7 works fine on my desktop, with the Nvidia driver.
I'll keep experimenting, but I'm not sure what to try next. So far, in all
other respects, I don't see a problem with the Nvidia driver.
Steve
On 07/30/2018 10:08 PM, Steven A. Falco wrote:
> Thanks for looking at it. Regarding your first question, I've placed a copy
> of my build log in the same dropbox directory, named "build.log".
>
> Regarding your second question, the gdb crash dump from the Copr nightly
> build looks about the same as the one from my local build. Both builds fail
> with the same error. I've placed both gdb logs in the dropbox directory,
> named "err-mine.log" and "err-nightly.log".
>
> The cmake command used for my build is:
>
> cmake \
> -DKICAD_SCRIPTING=OFF \
> -DKICAD_SCRIPTING_MODULES=OFF \
> -DKICAD_SCRIPTING_WXPYTHON=OFF \
> -DKICAD_SPICE=OFF \
> -DKICAD_VERSION_EXTRA=%{release} \
> -DwxWidgets_CONFIG_EXECUTABLE=%{_bindir}/%{wx_config} \
> .
>
> The type of build should default to "Release", according to CMakeLists.txt.
> The Fedora build tools add some options to the above command. From the build
> log, the command expands to:
>
> /usr/bin/cmake -DCMAKE_C_FLAGS_RELEASE:STRING=-DNDEBUG
> -DCMAKE_CXX_FLAGS_RELEASE:STRING=-DNDEBUG
> -DCMAKE_Fortran_FLAGS_RELEASE:STRING=-DNDEBUG
> -DCMAKE_VERBOSE_MAKEFILE:BOOL=ON -DCMAKE_INSTALL_PREFIX:PATH=/usr
> -DINCLUDE_INSTALL_DIR:PATH=/usr/include -DLIB_INSTALL_DIR:PATH=/usr/lib64
> -DSYSCONF_INSTALL_DIR:PATH=/etc -DSHARE_INSTALL_PREFIX:PATH=/usr/share
> -DLIB_SUFFIX=64 -DBUILD_SHARED_LIBS:BOOL=ON -DKICAD_SCRIPTING=OFF
> -DKICAD_SCRIPTING_MODULES=OFF -DKICAD_SCRIPTING_WXPYTHON=OFF
> -DKICAD_SPICE=OFF -DKICAD_VERSION_EXTRA=2.fc28
> -DwxWidgets_CONFIG_EXECUTABLE=/usr/bin/wx-config .
>
> wx-config reports its version as:
>
> saf$ /usr/bin/wx-config --version-full
> 3.0.4.0
>
> Please let me know any other info you need to help track this down.
>
> Steve
>
> On 07/30/2018 05:08 PM, Seth Hillbrand wrote:
>> Hi Steve-
>>
>> The assert is not triggering for me using Debian. However, I note that this
>> is a wxWidgets assertion, which should be disabled for release builds.
>> Since you did the packaging for Fedora, do you have a build log?
>> Alternatively, do you see this assertion when running a local build?
>>
>> -S
>>
>> Am Mo., 30. Juli 2018 um 12:37 Uhr schrieb Steven A. Falco
>> <[email protected] <mailto:[email protected]>>:
>>
>> I am using Fedora 28, and have just noticed a strange crash. This
>> happens with 5.0.0 and also with the latest nightly (r13432-e750382e).
>>
>> I've got to assume I'm doing something wrong, but I am baffled, so I
>> want to see what folks think.
>>
>> I've attached a backtrace. The way I cause this crash is to highlight a
>> part in the design here:
>>
>> https://www.dropbox.com/sh/46lxxedoalq0sdm/AABTNAmVP7wKjbv3_4hBcdcoa?dl=0
>>
>> I've attached several screenshots for reference.
>>
>> In "highlighted.png" you can see the part I've selected - an Atmel
>> micro. I type "E" to get the properties, and I wind up with a blank dialog
>> as shown in "blank_alert.png". It is at that point that I did the backtrace.
>>
>> This is with the fallback version of the modern toolset. If I try to
>> switch to the accelerated toolset, I get an error that I need OpenGL 2.1 or
>> higher. However, I think I have OpenGL 3.3.0:
>>
>> saf# glxinfo | grep "OpenGL version"
>> OpenGL version string: 3.3.0 NVIDIA 340.107
>>
>> Here is the version info from my build of 5.0.0:
>>
>> Application: kicad
>> Version: 5.0.0-2.fc28, release build
>> Libraries:
>> wxWidgets 3.0.4
>> libcurl/7.59.0 OpenSSL/1.1.0h zlib/1.2.11 libidn2/2.0.5
>> libpsl/0.20.2 (+libidn2/2.0.4) libssh/0.7.5/openssl/zlib nghttp2/1.32.0
>> Platform: Linux 4.17.9-200.fc28.x86_64 x86_64, 64 bit, Little endian,
>> wxGTK
>> Build Info:
>> wxWidgets: 3.0.4 (wchar_t,wx containers,compatible with 2.8) GTK+
>> 2.24
>> Boost: 1.66.0
>> OpenCASCADE Community Edition: 6.9.1
>> Curl: 7.59.0
>> Compiler: GCC 8.1.1 with C++ ABI 1013
>>
>> Build settings:
>> USE_WX_GRAPHICS_CONTEXT=OFF
>> USE_WX_OVERLAY=OFF
>> KICAD_SCRIPTING=OFF
>> KICAD_SCRIPTING_MODULES=OFF
>> KICAD_SCRIPTING_WXPYTHON=OFF
>> KICAD_SCRIPTING_ACTION_MENU=OFF
>> BUILD_GITHUB_PLUGIN=ON
>> KICAD_USE_OCE=ON
>> KICAD_USE_OCC=OFF
>> KICAD_SPICE=OFF
>>
>> Please let me know what you think. I'm mystified.
>>
>> Steve
>>
>> _______________________________________________
>> Mailing list: https://launchpad.net/~kicad-developers
>> <https://launchpad.net/%7Ekicad-developers>
>> Post to : [email protected]
>> <mailto:[email protected]>
>> Unsubscribe : https://launchpad.net/~kicad-developers
>> <https://launchpad.net/%7Ekicad-developers>
>> More help : https://help.launchpad.net/ListHelp
>>
>
>
_______________________________________________
Mailing list: https://launchpad.net/~kicad-developers
Post to : [email protected]
Unsubscribe : https://launchpad.net/~kicad-developers
More help : https://help.launchpad.net/ListHelp
