On 30.04.2017 21:02, Lachlan Audas wrote: > Here's the link, > http://www.cosmosc.com/example/A10-A20-OLINUXINO-MICRO-4GB_Rev_D.brd > it's in eagle format, so import under pcbnew. > I should of added that viewing the (E)properties and make no changes > (but hitting the OK instead of the Cancel button) regenerates the flood > fill. > while not wrong, it may be worth adding a change bit, to the > properties requester, and only regenerates if something has changed. > But I suppose that's nit picking ;) >
Hi, Lachlan sent me a complex board in Eagle that has several copper zones, each with different clearances, which filled incorrectly or didn't fill at all. There were some trivial issues (e.g. inverted filling priority), but there is one that needs discussion: In pcbnew, each zone must have manually assignned clearance (in the property window). In Eagle or Altium, if there's no clearance specified, the program takes the clearance set in the Design Rules for the net the zone belongs to. I propose to add a similar feature to Kicad, that is: - add a checkbox "use custom clearance" in the zone properties window - if not checked, take the netclass clearance. This unfortunately requires a small file format change. Would you agree with that? Also, many thanks to Lachlan for spotting this problem! Cheers, Tom _______________________________________________ Mailing list: https://launchpad.net/~kicad-developers Post to : [email protected] Unsubscribe : https://launchpad.net/~kicad-developers More help : https://help.launchpad.net/ListHelp
