Hey,
this is great, tested on Debian 8.5
1. I would propose to add this one liner to documentation for
dependencies in Ubuntu and Debian:
sudo aptitude install libgtk-3-dev libcairo2-dev libgit2-dev transfig
imagemagick
and to add "sudo" before "make install"
2. Paths are broken for me for some symbols, because I have Kicad in
/usr/local/share/kicad
/usr/share/kicad/library/contrib.lib: No such file or directory
valves.lib: No such file or directory
/usr/share/kicad/library/valves.lib: No such file or directory
"TIP122" not found
"LM358N" not found
I tried change in kicad/kicad.h to only correct one
#define KICAD_DATAS_PATH(append) \
"/usr/local/share/kicad" append
But no luck, after recompile and reinstall it gives this
contrib.lib: No such file or directory
valves.lib: No such file or directory
"TIP122" not found
"LM358N" not found
ls /usr/local/share/kicad/
demos library modules scripting template
ls /usr/local/share/kicad/library/
ac-dc.dcm atmel.dcm conn.lib
digital-audio.lib ftdi.lib ir.dcm microcontrollers.dcm
microchip_pic16mcu.lib nordicsemi.dcm power.dcm
relays.dcm stm8.dcm transistors.lib Zilog.dcm
ac-dc.lib atmel.lib contrib.dcm diode.dcm
gennum.dcm ir.lib microcontrollers.lib
microchip_pic18mcu.dcm nordicsemi.lib powerint.dcm
relays.lib stm8.lib ttl_ieee.dcm Zilog.lib
actel.dcm audio.dcm contrib.lib diode.lib
gennum.lib Lattice.dcm microchip.dcm
microchip_pic18mcu.lib nxp_armmcu.dcm powerint.lib
rfcom.dcm supertex.dcm ttl_ieee.lib 74xgxx.dcm
actel.lib audio.lib contrib_symbols_dl1eic
display.dcm graphic.dcm Lattice.lib
microchip_dspic33dsc.dcm microchip_pic32mcu.dcm nxp_armmcu.lib
power.lib rfcom.lib supertex.lib valves.dcm
74xgxx.lib
adc-dac.dcm brooktre.dcm cypress.dcm
display.lib graphic.lib linear.dcm
microchip_dspic33dsc.lib microchip_pic32mcu.lib onsemi.dcm
Power_Management.lib sensors.dcm switches.dcm valves.lib
74xx.dcm
adc-dac.lib brooktre.lib cypress.lib dsp.dcm
hc11.dcm linear.lib microchip.lib
motor_drivers.dcm onsemi.lib pspice.dcm
sensors.lib switches.lib video.dcm 74xx.lib
Altera.lib cmos_ieee.dcm dc-dc.dcm dsp.lib
hc11.lib logo.lib microchip_pic10mcu.dcm
motor_drivers.lib opto.dcm pspice.lib
silabs.dcm texas.dcm video.lib
analog_devices.dcm cmos_ieee.lib dc-dc.lib
elec-unifil.dcm intel.dcm maxim.dcm microchip_pic10mcu.lib
motorola.dcm opto.lib references.dcm
silabs.lib texas.lib Xicor.dcm
analog_devices.lib cmos4000.dcm device.dcm
elec-unifil.lib intel.lib maxim.lib microchip_pic12mcu.dcm
motorola.lib Oscillators.lib references.lib
siliconi.lib transf.dcm Xicor.lib
analog_switches.dcm cmos4000.lib device.lib
ESD_Protection.lib interface.dcm memory.dcm microchip_pic12mcu.lib
msp430.dcm philips.dcm regul.dcm
stm32.dcm transf.lib xilinx.dcm
analog_switches.lib conn.dcm digital-audio.dcm ftdi.dcm
interface.lib memory.lib microchip_pic16mcu.dcm
msp430.lib philips.lib regul.lib
stm32.lib transistors.dcm xilinx.lib
On 10 September 2016 at 11:23, Werner Almesberger
<wer...@almesberger.net> wrote:
> Eldar Khayrullin wrote:
>> I don't think that it is advisable now.
>
> Hmm, do you mean trying to use Eeschema/-like fonts ?
>
>> See Roadmap why it is as
>> (http://ci.kicad-pcb.org/job/kicad-doxygen/ws/Documentation/doxygen/html/v5_road_map.html).
>
> There's a lot on this page :-) Are you thinking of
> Project > Common Library > Unified Rendering Framework
> "Port wxDC to GAL or get Cairo rendering" ?
>
> I've asked about that on #kicad, and I get the impressions that the
> plans for Eeschema are still fairly vague in this regard.
>
> In any case, I'm not in a hurry to jump into this. As long as text
> rendering works acceptably, that's good enough for me at the present
> stage. My current focus is mainly on file access (sounds boring but
> gets rather entertaining when you add repos and their history to the
> mix) and on making diffs better.
>
> - Werner
>
> _______________________________________________
> Mailing list: https://launchpad.net/~kicad-developers
> Post to : kicad-developers@lists.launchpad.net
> Unsubscribe : https://launchpad.net/~kicad-developers
> More help : https://help.launchpad.net/ListHelp
--
Roman Pavelka
http://kmlinux.fjfi.cvut.cz/~pavelro1
_______________________________________________
Mailing list: https://launchpad.net/~kicad-developers
Post to : kicad-developers@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kicad-developers
More help : https://help.launchpad.net/ListHelp
