Hi Jean-Pierre,
Here is a new patch with two methods respectively called PutOnGridMM and
PutOnGridMils.
Regards,
Mikael
On Thu, Feb 18, 2016 at 6:36 AM, jp charras <jp.char...@wanadoo.fr> wrote:
> Le 16/02/2016 19:33, Mikael Arguedas a écrit :
> > Hi guys,
> >
> > Here is the rounding function patch
> >
> > Cheers,
> > Mikael
> >
>
> OK.
>
> I noticed the rounding grid parameter is only in mm.
> It could be worth having the possibility to use inches and mils, or
> using a name like PutOnGridMM instead of just PutOnGrid, to avoid mistakes.
>
> Thanks.
>
> --
> Jean-Pierre CHARRAS
>
=== modified file 'pcbnew/scripting/plugins/HelpfulFootprintWizardPlugin.py'
--- pcbnew/scripting/plugins/HelpfulFootprintWizardPlugin.py 2016-02-14 09:47:07 +0000
+++ pcbnew/scripting/plugins/HelpfulFootprintWizardPlugin.py 2016-02-18 17:20:15 +0000
@@ -279,6 +279,24 @@
"""
pass
+ def PutOnGridMM(self, value, gridSizeMM=0.05):
+ """
+ Round the value (in KiCAD internal units 1nm) according to the
+ provided gridSize in mm.
+ """
+ thresh = pcbnew.FromMM(gridSizeMM)
+ res = round(value/thresh)*thresh
+ return res
+
+ def PutOnGridMils(self, value, gridSizeMil=2):
+ """
+ Round the value (in KiCAD internal units 1nm) according to the
+ provided gridSize in mil.
+ """
+ thresh = pcbnew.FromMils(gridSizeMil)
+ res = round(value/thresh)*thresh
+ return res
+
def BuildThisFootprint(self):
"""
Draw the footprint.
=== modified file 'pcbnew/scripting/plugins/bga_wizard.py'
--- pcbnew/scripting/plugins/bga_wizard.py 2016-02-18 14:29:30 +0000
+++ pcbnew/scripting/plugins/bga_wizard.py 2016-02-18 17:20:32 +0000
@@ -86,6 +86,9 @@
self.draw.SetLayer(pcbnew.F_CrtYd)
sizex = (ssx + cmargin) * 2
sizey = (ssy + cmargin) * 2
+ # round size to nearest 0.1mm, rectangle will thus land on a 0.05mm grid
+ sizex = self.PutOnGridMM(sizex, 0.1)
+ sizey = self.PutOnGridMM(sizey, 0.1)
# set courtyard line thickness to the one defined in KLC
self.draw.SetLineThickness(pcbnew.FromMM(0.05))
self.draw.Box(0, 0, sizex, sizey)
=== modified file 'pcbnew/scripting/plugins/qfp_wizard.py'
--- pcbnew/scripting/plugins/qfp_wizard.py 2016-02-18 14:29:30 +0000
+++ pcbnew/scripting/plugins/qfp_wizard.py 2016-02-18 17:21:31 +0000
@@ -113,6 +113,9 @@
self.draw.SetLayer(pcbnew.F_CrtYd)
sizex = (lim_x + cmargin) * 2 + pad_length
sizey = (lim_y + cmargin) * 2 + pad_length
+ # round size to nearest 0.1mm, rectangle will thus land on a 0.05mm grid
+ sizex = self.PutOnGridMM(sizex, 0.1)
+ sizey = self.PutOnGridMM(sizey, 0.1)
# set courtyard line thickness to the one defined in KLC
thick = self.draw.GetLineThickness()
self.draw.SetLineThickness(pcbnew.FromMM(0.05))
=== modified file 'pcbnew/scripting/plugins/sdip_wizard.py'
--- pcbnew/scripting/plugins/sdip_wizard.py 2016-02-18 14:29:30 +0000
+++ pcbnew/scripting/plugins/sdip_wizard.py 2016-02-18 17:22:18 +0000
@@ -109,6 +109,9 @@
self.draw.SetLayer(pcbnew.F_CrtYd)
sizex = (ssx + cmargin) * 2
sizey = (ssy + cmargin) * 2
+ # round size to nearest 0.1mm, rectangle will thus land on a 0.05mm grid
+ sizex = self.PutOnGridMM(sizex, 0.1)
+ sizey = self.PutOnGridMM(sizey, 0.1)
# set courtyard line thickness to the one defined in KLC
self.draw.SetLineThickness(pcbnew.FromMM(0.05))
self.draw.Box(0, 0, sizex, sizey)
=== modified file 'pcbnew/scripting/plugins/zip_wizard.py'
--- pcbnew/scripting/plugins/zip_wizard.py 2016-02-18 14:29:30 +0000
+++ pcbnew/scripting/plugins/zip_wizard.py 2016-02-18 17:23:40 +0000
@@ -102,10 +102,13 @@
cmarginx = body[self.courtyard_x_margin_key]
cmarginy = body[self.courtyard_y_margin_key]
self.draw.SetLayer(pcbnew.F_CrtYd)
- # set courtyard line thickness to the one defined in KLC
thick = self.draw.GetLineThickness()
sizex = (pin1posX + cmarginx) * 2 + pad_Hsize + thick
sizey = (pin1posY + cmarginy) * 2 + pad_Vsize + thick
+ # round size to nearest 0.1mm, rectangle will thus land on a 0.05mm grid
+ sizex = self.PutOnGridMM(sizex, 0.1)
+ sizey = self.PutOnGridMM(sizey, 0.1)
+ # set courtyard line thickness to the one defined in KLC
self.draw.SetLineThickness(pcbnew.FromMM(0.05))
self.draw.Box(0, 0, sizex, sizey)
# restore line thickness to previous value
_______________________________________________
Mailing list: https://launchpad.net/~kicad-developers
Post to : kicad-developers@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kicad-developers
More help : https://help.launchpad.net/ListHelp
