On 15 July 2015 at 02:59, Maciej Sumiński <maciej.sumin...@cern.ch> wrote: > > I have pushed Tom's recent fixes that should solve the issue. I also did > a few mistakes while merging yesterday, so I overwrote the bzr > repository with the right version. >
Thanks Tom and Orson. I built a fresh copy from your latest changes and the 3D viewer is snappy again. Results of zone filling etc. look fine too. Also, looking through a diff of the PCB after I rebuilt the zones, it seems your code is smarter than Boosts. For example, I saw in a few places changes like - (xy 74.798 74.798) (xy 74.798 74.798) (xy 25.202 74.798) + (xy 74.798 74.798) (xy 25.202 74.798) where Boost was generating repeated points and you aren't :). After reading JP's message I played around with a few cutouts to see how it worked for me on the latest version. The only weird thing I noticed was when two cutouts overlapped, sometimes the zone was filled right up to the edge of the cutout, and sometimes to a margin: http://i.imgur.com/gtTLoBR.png With just a single cutout, it always went right up to the edge of the cutout. The margin is ~0.13mm, as opposed to the ~0.3mm margin between the zone fills and the board outline. In a build of product branch r5935 with the same cutouts, the zone always went right up to the edge of the cutout. Cheers Blair
_______________________________________________ Mailing list: https://launchpad.net/~kicad-developers Post to : kicad-developers@lists.launchpad.net Unsubscribe : https://launchpad.net/~kicad-developers More help : https://help.launchpad.net/ListHelp
