Le 22/03/2015 23:21, Chris Pavlina a écrit : > Noticed recently that the schematics in the demos/ directory are... a > little grim. We could use some tidier schematics for demos, it shows off > the software better. > > Here's a patch that cleans up these things: > > - More consistent alignment of similar parts in a schematic - don't > scatter them so much. > > - More consistent placement of PWR_FLAGs - should be near power entry. > > - No f-off tiny fonts in critical places where people really need to be > able to read them. Refdes and values should be 50mil minimum, power > labels should be 40mil minimum > > - Bit of alignment in the placement of refdes/values. > > - Consistently orient circuits according to positive->negative > vertically and input->output horizontally > > - Many of them have text in two languages. I replaced that with English > > - Remove overlaps, especially between components and the recently > upsized title block, and for some reason, reference designators of > transistors. > > - Avoid four-way junctions > > - Align more consistently to a 100mil grid, not 50mil. > > - Make connections with wires instead of just dropping pins on pins, as > this makes it easier to drag parts. > > - Added missing junction dots, removed a few extra ones. > > Use it if you like. > > Chris
I committed you patch, but due to a mistake, under my name. I am very sorry. Thanks. -- Jean-Pierre CHARRAS _______________________________________________ Mailing list: https://launchpad.net/~kicad-developers Post to : kicad-developers@lists.launchpad.net Unsubscribe : https://launchpad.net/~kicad-developers More help : https://help.launchpad.net/ListHelp
