On Tue, 2025-02-18 at 14:55 -0800, steven chen wrote:
> The amount of memory allocated at kexec load, even with the extra memory
> allocated, might not be large enough for the entire measurement list.  The
> indeterminate interval between kexec 'load' and 'execute' could exacerbate
> this problem.
> 
> Define two new IMA events, 'kexec_load' and 'kexec_execute', to be 
> measured as critical data at kexec 'load' and 'execute' respectively.
> Report the allocated kexec segment size, IMA binary log size and the
> runtime measurements count as part of those events.
> 
> These events, and the values reported through them, serve as markers in
> the IMA log to verify the IMA events are captured during kexec soft
> reboot.  The presence of a 'kexec_load' event in between the last two
> 'boot_aggregate' events in the IMA log implies this is a kexec soft
> reboot, and not a cold-boot. And the absence of 'kexec_execute' event
> after kexec soft reboot implies missing events in that window which
> results in inconsistency with TPM PCR quotes, necessitating a cold boot
> for a successful remote attestation.
> 
> The 'kexec_load' event IMA log can be found using the following command:
> sudo cat /sys/kernel/security/integrity/ima/ascii_runtime_measurements |
>    grep kexec_load
> 
> The 'kexec_load' event IMA log can be found using the following command:

-> kexec_execute

> sudo cat /sys/kernel/security/integrity/ima/ascii_runtime_measurements |
>    grep kexec_execute

These critical data events are displayed as hex encoded ascii in the
ascii_runtime_measurement_list.  Verifying the critical data hash requires 
calculating the
hash of the decoded ascii string.  For example:

sudo cat /sys/kernel/security/integrity/ima/ascii_runtime_measurements | grep  
kexec_load
| cut -d' ' -f 6 | xxd -r -p | sha256sum

> 
> Signed-off-by: Tushar Sugandhi <tusha...@linux.microsoft.com>
> Signed-off-by: steven chen <chen...@linux.microsoft.com>
> ---
>  security/integrity/ima/ima.h       |  6 ++++++
>  security/integrity/ima/ima_kexec.c | 21 +++++++++++++++++++++
>  security/integrity/ima/ima_queue.c |  5 +++++
>  3 files changed, 32 insertions(+)
> 
> diff --git a/security/integrity/ima/ima.h b/security/integrity/ima/ima.h
> index 4428fcf42167..1452c98242a4 100644
> --- a/security/integrity/ima/ima.h
> +++ b/security/integrity/ima/ima.h
> @@ -240,6 +240,12 @@ void ima_post_key_create_or_update(struct key *keyring, 
> struct key
> *key,
>                                  unsigned long flags, bool create);
>  #endif
>  
> +#ifdef CONFIG_IMA_KEXEC
> +void ima_measure_kexec_event(const char *event_name);
> +#else
> +static inline void ima_measure_kexec_event(const char *event_name) {}
> +#endif
> +
>  /*
>   * The default binary_runtime_measurements list format is defined as the
>   * platform native format.  The canonical format is defined as little-endian.
> diff --git a/security/integrity/ima/ima_kexec.c 
> b/security/integrity/ima/ima_kexec.c
> index 6c8c203ad81e..8d0782e51ffa 100644
> --- a/security/integrity/ima/ima_kexec.c
> +++ b/security/integrity/ima/ima_kexec.c
> @@ -17,6 +17,8 @@
>  #include "ima.h"
>  
>  #ifdef CONFIG_IMA_KEXEC
> +#define IMA_KEXEC_EVENT_LEN 256
> +
>  static struct seq_file ima_kexec_file;
>  static void *ima_kexec_buffer;
>  static size_t kexec_segment_size;
> @@ -36,6 +38,24 @@ static void ima_free_kexec_file_buf(struct seq_file *sf)
>       ima_reset_kexec_file(sf);
>  }
>  
> +void ima_measure_kexec_event(const char *event_name)
> +{
> +     char ima_kexec_event[IMA_KEXEC_EVENT_LEN];
> +     size_t buf_size = 0;
> +     long len;
> +
> +     buf_size = ima_get_binary_runtime_size();
> +     len = atomic_long_read(&ima_htable.len);
> +
> +     scnprintf(ima_kexec_event, IMA_KEXEC_EVENT_LEN,
> +               "kexec_segment_size=%lu;ima_binary_runtime_size=%lu;"
> +              "ima_runtime_measurements_count=%ld;",
> +              kexec_segment_size, buf_size, len);
> +
> +     ima_measure_critical_data("ima_kexec", event_name, ima_kexec_event,
> +                               strlen(ima_kexec_event), false, NULL, 0);

As previously mentioned, scnprintf() returns the length.  No need to use 
strlen() here.

Mimi

> +}
> +
>  static int ima_alloc_kexec_file_buf(size_t segment_size)
>  {
>       /*
> @@ -58,6 +78,7 @@ static int ima_alloc_kexec_file_buf(size_t segment_size)
>  out:
>       ima_kexec_file.read_pos = 0;
>       ima_kexec_file.count = sizeof(struct ima_kexec_hdr);    /* reserved 
> space */
> +     ima_measure_kexec_event("kexec_load");
>  
>       return 0;
>  }
> diff --git a/security/integrity/ima/ima_queue.c 
> b/security/integrity/ima/ima_queue.c
> index 3dfd178d4292..6afb46989cf6 100644
> --- a/security/integrity/ima/ima_queue.c
> +++ b/security/integrity/ima/ima_queue.c
> @@ -241,6 +241,11 @@ static int ima_reboot_notifier(struct notifier_block *nb,
>                              unsigned long action,
>                              void *data)
>  {
> +#ifdef CONFIG_IMA_KEXEC
> +     if (action == SYS_RESTART && data && !strcmp(data, "kexec reboot"))
> +             ima_measure_kexec_event("kexec_execute");
> +#endif
> +
>       ima_measurements_suspend();
>  
>       return NOTIFY_DONE;


Reply via email to