This bug was fixed in the package linux-oem-6.11 - 6.11.0-1010.10
---------------
linux-oem-6.11 (6.11.0-1010.10) noble; urgency=medium
* noble/linux-oem-6.11: 6.11.0-1010.10 -proposed tracker (LP:
#2090462)
* DSC through MST for Intel and AMD platforms (LP: #2090898)
- drm/i915/dp_mst: Handle error during DSC BW overhead/slice calculation
- drm/i915/dp_mst: Don't require DSC hblank quirk for a non-DSC compatible
mode
- drm/i915/dp: Flush modeset commits during connector detection
- drm/i915/ptl/dp_mst: Fix slave transcoder enabling wrt. DDI function
- drm/i915/adlp+/dp_mst: Align slave transcoder enabling with spec wrt. DDI
function
- drm/dp_mst: Factor out function to queue a topology probe work
- drm/dp_mst: Add a helper to queue a topology probe
- drm/dp_mst: Simplify the condition when to enumerate path resources
- drm/i915/ddi: For an active output call the DP encoder sync_state() only
for
DP
- drm/i915/dp: Initialize the link parameters during HW readout
- drm/i915/dp: Send only a single modeset-retry uevent for a commit
- drm/i915/dp: Add a separate function to reduce the link parameters
- drm/i915/dp: Add helpers to set link training mode, BW parameters
- drm/i915/dp_mst: Reduce the link parameters in BW order after LT failures
- drm/i915/dp_mst: Configure MST after the link parameters are reset
- drm/i915/dp_mst: Queue modeset-retry after a failed payload BW allocation
- drm/i915/dp_mst: Reprobe the MST topology after a link parameter change
- drm/i915/dp_mst: Ensure link parameters are up-to-date for a disabled link
- drm/i915/dp_mst: Enable LT fallback between UHBR/non-UHBR link rates
- drm/amd/display: Fix Synaptics Cascaded Panamera DSC Determination
- drm/amd/display: Add DSC Debug Log
- drm/amdgpu/display: Fix a mistake in revert commit
- drm/amd/display: Add HDMI DSC native YCbCr422 support
- drm/amd/display: free bo used for dmub bounding box
- drm/amd/display: Check null pointers before using them
- drm/amd/display: Add null check for 'afb' in amdgpu_dm_update_cursor (v2)
- drm/amd/display: Check stream_status before it is used
- drm/amd/display: Check stream before comparing them
- drm/amd/display: Check phantom_stream before it is used
- drm/amd/display: Check null-initialized variables
- drm/amd/display: Initialize denominators' default to 1
- drm/amd/display: Check null pointers before using dc->clk_mgr
- drm/amd/display: Check link_res->hpo_dp_link_enc before using it
- drm/amd/display: Check link_res->hpo_dp_link_enc before using it
- drm/amd/display: Pass non-null to dcn20_validate_apply_pipe_split_flags
- drm/amd/display: Check null pointers before used
- drm/amd/display: Check null pointers before multiple uses
- drm/amd/display: Add null check for head_pipe in
dcn201_acquire_free_pipe_for_layer
- drm/amd/display: Add null check for head_pipe in
dcn32_acquire_idle_pipe_for_head_pipe_in_layer
- drm/amd/display: Add NULL check for clk_mgr and clk_mgr->funcs in
dcn30_init_hw
- drm/amd/display: Add NULL check for clk_mgr and clk_mgr->funcs in
dcn401_init_hw
- drm/amd/display: Add NULL check for clk_mgr in dcn32_init_hw
- drm/amd/display: Add null check for pipe_ctx->plane_state in
dcn20_program_pipe
- drm/amd/display: Add null check for top_pipe_to_program in
commit_planes_for_stream
- drm/amd/display: Handle null 'stream_status' in
'planes_changed_for_existing_stream'
- drm/amd/display: Add NULL check for function pointer in
dcn20_set_output_transfer_func
- drm/amd/display: Add NULL check for function pointer in
dcn401_set_output_transfer_func
- drm/amd/display: Add NULL check for function pointer in
dcn32_set_output_transfer_func
- drm/amd/display: Check null pointer before try to access it
- drm/amd/display: Add null check for 'afb' in
amdgpu_dm_plane_handle_cursor_update (v2)
- drm/amdgpu: add list empty check to avoid null pointer issue
* Fix Mic Mute LED no function on HP laptops with Cirrus amplifier
(LP: #2089889)
- ALSA: hda/realtek: Autodetect Cirrus Logic companion amplifier bindings
- ALSA: hda/realtek: fix micmute LEDs don't work on HP Laptops
* display brightness level not retained over reboot with amdgpu (LP: #2090789)
- drm/amd/display: Fix brightness level not retained over reboot
* Adding support for Realtek sof-soundwire audio on Dell GhostRider platform
(LP: #2086250)
- ASoC: Intel: sof_sdw: add rt1320 amp support
- ASoC: rt1320: Add support for version C
- ASoC: rt1320: reads patch code from firmware file
- ASoC: Intel: soc-acpi: arl: Fix some missing empty terminators
- ASoC: rt1320: fix the range of patch code address
- ASoC: sdw_utils: Add support for exclusion DAI quirks
- ASoC: sdw_utils: Add quirk to exclude amplifier function
- ASoC: intel: sof_sdw: add quirk for Dell SKU
- ASoC: Intel: soc-acpi-intel-arl-match: Add rt722 and rt1320 support
- ASoC: intel: sof_sdw: add quirk for Dell SKU
* Enable AMD Panel Replay (LP: #2089556)
- drm/amd/display: Re-enable panel replay feature
- drm/amd/display: Run idle optimizations at end of vblank handler
- drm/amd/display: Change some variable name of psr
- drm/amd/display: Fix Panel Replay not update screen correctly
* Kernel sometimes panics after executing `hcitool inq` [WCN7851 0489:e0f3]
(LP: #2090890)
- SAUCE: Bluetooth: btusb: avoid NULL pointer dereference in skb_dequeue()
* [SRU] Add audio rt713 and rt718 support on ThinkPad TM2 (LP: #2089891)
- ASoC: Intel: soc-acpi: lnl: Add match entry for TM2 laptops
* Support cs42l43 on some platforms (LP: #2089644)
- ASoC: Intel: soc-acpi: arl: Add match entries for new cs42l43 laptops
- ASoC: Intel: soc-acpi: adl: Add match entries for new cs42l43 laptops
- ASoC: Intel: soc-acpi: lnl: Add match entries for new cs42l43 laptops
* Set PCBeep to default value for ALC274 (LP: #2089811)
- ALSA: hda/realtek: Set PCBeep to default value for ALC274
* Enable ASPM on Realtek NIC on Dell platform (LP: #2089810)
- SAUCE: r8169: Add one Dell platform to the ASPM quirk
[ Ubuntu: 6.11.0-13.14 ]
* oracular/linux: 6.11.0-13.14 -proposed tracker (LP: #2090463)
* Packaging resync (LP: #1786013)
- [Packaging] resync git-ubuntu-log
* MGLRU: kswapd uses 100% CPU when MGLRU is enabled and under memory pressure
(LP: #2087886)
- mm/mglru: only clear kswapd_failures if reclaimable
* CVE-2024-50264
- vsock/virtio: Initialization of the dangling pointer occurring in
vsk->trans
* CVE-2024-53057
- net/sched: stop qdisc_tree_reduce_backlog on TC_H_ROOT
* CVE-2024-49967
- ext4: no need to continue when the number of entries is 1
-- Kuan-Ying Lee <kuan-ying....@canonical.com> Mon, 09 Dec 2024
13:51:54 +0800
** Changed in: linux-oem-6.11 (Ubuntu Noble)
Status: Fix Committed => Fix Released
** CVE added: https://cve.mitre.org/cgi-bin/cvename.cgi?name=2024-49967
** CVE added: https://cve.mitre.org/cgi-bin/cvename.cgi?name=2024-50264
** CVE added: https://cve.mitre.org/cgi-bin/cvename.cgi?name=2024-53057
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-oem-6.11 in Ubuntu.
https://bugs.launchpad.net/bugs/2089811
Title:
Set PCBeep to default value for ALC274
Status in HWE Next:
New
Status in OEM Priority Project:
New
Status in linux-oem-6.11 package in Ubuntu:
Invalid
Status in linux-oem-6.11 source package in Noble:
Fix Released
Status in linux-oem-6.11 source package in Plucky:
Invalid
Bug description:
[ Impact ]
Some machines with ALC274 may play out extremely loud beep noise on
boot, due to the fact that the BIOS enables the PC beep path and leave
it into the OS.
[ Fix ]
Cherry-pick the following commit:
155699ccab7c78cb (ALSA: hda/realtek: Set PCBeep to default value for
ALC274)
[ Test ]
1. Install the kernel
2. Reboot the system
3. The speaker should not play out loud noise during boot.
[ Where the problem could occur ]
If the COEF is not correctly set, the issue may still occur.
To manage notifications about this bug go to:
https://bugs.launchpad.net/hwe-next/+bug/2089811/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
