Public bug reported:

On a freshly installed NanoPi R4S, the first reboot hangs with this
error:

### ERROR ### Please RESET the board ###

All reboots after this work OK. The problem only exists with the
oracular image from https://sd-card-
images.johang.se/boards/nanopi_r4s.html; I'm using the image ubuntu-
oracular-arm64-eo3ye4.bin.gz.

Images for noble and plucky are also affecxted; jammy works OK.

Messages leading up to this message:

[  OK  ] Reached target reboot.target - System Reboot.
[  117.632275] reboot: Restarting system

U-Boot TPL 2024.10johang-dirty (Nov 01 2024 - 02:10:40)
lpddr4_set_rate: change freq to 400MHz 0, 1
Channel 0: LPDDR4, 400MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
Channel 1: LPDDR4, 400MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
256B stride
lpddr4_set_rate: change freq to 800MHz 1, 0
Trying to boot from BOOTROM
Returning to boot ROM...

U-Boot SPL 2024.10johang-dirty (Nov 01 2024 - 02:10:40 +0000)
Trying to boot from MMC2
mmc_load_image_raw_sector: mmc block read error
Trying to boot from MMC2
mmc_load_image_raw_sector: mmc block read error
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###

ProblemType: Bug
DistroRelease: Ubuntu 24.10
Package: linux-image-6.11.0-9-generic 6.11.0-9.9
ProcVersionSignature: Ubuntu 6.11.0-9.9-generic 6.11.0
Uname: Linux 6.11.0-9-generic aarch64
ApportVersion: 2.30.0-0ubuntu4
Architecture: arm64
AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/timer', 
'/dev/snd/seq'] failed with exit code 1:
CasperMD5CheckResult: unknown
Date: Sun Dec  1 18:20:49 2024
Lspci-vt: -[0000:00]---00.0-[01]----00.0  Realtek Semiconductor Co., Ltd. 
RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet Controller
ProcFB:
 
ProcKernelCmdLine: root=PARTUUID=df945dd4-02 rw rootwait
RelatedPackageVersions:
 linux-restricted-modules-6.11.0-9-generic N/A
 linux-backports-modules-6.11.0-9-generic  N/A
 linux-firmware                            20240913.gita34e7a5f-0ubuntu2
RfKill:
 
SourcePackage: linux
StagingDrivers: rockchip_vdec
UpgradeStatus: No upgrade log present (probably fresh install)
acpidump:

** Affects: linux (Ubuntu)
     Importance: Undecided
         Status: New


** Tags: apport-bug arm64 oracular staging

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/2090788

Title:
  On a NanoPi R4S, oracular fails the first reboot

Status in linux package in Ubuntu:
  New

Bug description:
  On a freshly installed NanoPi R4S, the first reboot hangs with this
  error:

  ### ERROR ### Please RESET the board ###

  All reboots after this work OK. The problem only exists with the
  oracular image from https://sd-card-
  images.johang.se/boards/nanopi_r4s.html; I'm using the image ubuntu-
  oracular-arm64-eo3ye4.bin.gz.

  Images for noble and plucky are also affecxted; jammy works OK.

  Messages leading up to this message:

  [  OK  ] Reached target reboot.target - System Reboot.
  [  117.632275] reboot: Restarting system

  U-Boot TPL 2024.10johang-dirty (Nov 01 2024 - 02:10:40)
  lpddr4_set_rate: change freq to 400MHz 0, 1
  Channel 0: LPDDR4, 400MHz
  BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
  Channel 1: LPDDR4, 400MHz
  BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
  256B stride
  lpddr4_set_rate: change freq to 800MHz 1, 0
  Trying to boot from BOOTROM
  Returning to boot ROM...

  U-Boot SPL 2024.10johang-dirty (Nov 01 2024 - 02:10:40 +0000)
  Trying to boot from MMC2
  mmc_load_image_raw_sector: mmc block read error
  Trying to boot from MMC2
  mmc_load_image_raw_sector: mmc block read error
  SPL: failed to boot from all boot devices
  ### ERROR ### Please RESET the board ###

  ProblemType: Bug
  DistroRelease: Ubuntu 24.10
  Package: linux-image-6.11.0-9-generic 6.11.0-9.9
  ProcVersionSignature: Ubuntu 6.11.0-9.9-generic 6.11.0
  Uname: Linux 6.11.0-9-generic aarch64
  ApportVersion: 2.30.0-0ubuntu4
  Architecture: arm64
  AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/timer', 
'/dev/snd/seq'] failed with exit code 1:
  CasperMD5CheckResult: unknown
  Date: Sun Dec  1 18:20:49 2024
  Lspci-vt: -[0000:00]---00.0-[01]----00.0  Realtek Semiconductor Co., Ltd. 
RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet Controller
  ProcFB:
   
  ProcKernelCmdLine: root=PARTUUID=df945dd4-02 rw rootwait
  RelatedPackageVersions:
   linux-restricted-modules-6.11.0-9-generic N/A
   linux-backports-modules-6.11.0-9-generic  N/A
   linux-firmware                            20240913.gita34e7a5f-0ubuntu2
  RfKill:
   
  SourcePackage: linux
  StagingDrivers: rockchip_vdec
  UpgradeStatus: No upgrade log present (probably fresh install)
  acpidump:

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2090788/+subscriptions


-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to     : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

Reply via email to