** Description changed:
[SRU Justification]
[Impact]
The laptop of Intel RPL platform connects the external display via the
HDMI/DisplayPort on a USB Type-C interfaced dock with dual type-C cable
connected (WD19DC). The external display will stay blank after re-connect the
docking station. It was observed on WD19DC with monitor 4K@60fps mode.
[Fix]
- The upstream fix 594cf78dc36f ("drm/i915/dp_mst: Fix MST state after a sink
reset") and its dependency are required.
+ The upstream fix in kernel 6.11 594cf78dc36f ("drm/i915/dp_mst: Fix MST state
after a sink reset") and its dependency are required.
[Test Case]
1. Connect the external monitor via the WD19DC docking station to the Intel
powered laptop
2. Switch the monitor to 4K resolution and maximum refresh rate (>= 60fps)cul
3. Re-plug the WD19DC and check if the external display comes back in blank
or normal.
[Where problems could occur]
Only observed on particular docking station and monitor. The risk should be
low.
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/2081786
Title:
Fix blank screen on external display after reconnecting the USB type-C
Status in HWE Next:
New
Status in linux package in Ubuntu:
New
Status in linux source package in Noble:
In Progress
Bug description:
[SRU Justification]
[Impact]
The laptop of Intel RPL platform connects the external display via the
HDMI/DisplayPort on a USB Type-C interfaced dock with dual type-C cable
connected (WD19DC). The external display will stay blank after re-connect the
docking station. It was observed on WD19DC with monitor 4K@60fps mode.
[Fix]
The upstream fix in kernel 6.11 594cf78dc36f ("drm/i915/dp_mst: Fix MST state
after a sink reset") and its dependency are required.
[Test Case]
1. Connect the external monitor via the WD19DC docking station to the Intel
powered laptop
2. Switch the monitor to 4K resolution and maximum refresh rate (>= 60fps)cul
3. Re-plug the WD19DC and check if the external display comes back in blank
or normal.
[Where problems could occur]
Only observed on particular docking station and monitor. The risk should be
low.
To manage notifications about this bug go to:
https://bugs.launchpad.net/hwe-next/+bug/2081786/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : [email protected]
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
