Hello Anderson, Thank you for reporting the issue. We have a new kernel for 22.04 (version 5.15.0-102.112) that is about to be released in the next few days. Could you please test it again with this kernel and report the results? You can either enable -proposed in your system and update the kernel, or wait until it gets promoted to -updates and a simple dist- upgrate will update the kernel.
-- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2057960 Title: Problems on Fibre Channel over Ethernet on Ubuntu 22.04.4 Status in linux package in Ubuntu: New Bug description: Since I've upgraded my server's to Ubuntu 22.04.4 I'm facing problems to make my fcoe setup to work correctly. Firstly, some context. We have a HPE Synergy appliance with a bunch of Synergy 480 Gen10 servers still running Ubuntu 20.04. Each 480 server has 4 QLogic BCM57840 NetXtreme II Ethernet Multi Function network adapters with two of them dedicated to storage communication through FCoE. Recently, I've upgraded one of them to Ubuntu 22.04 and realized that after the upgrade, all the Fibre Channel LUNs have disappeared. During the diagnostic process I noticed that both network (bnx2x) and fcoe (fcoe, bnx2fc) kernel drivers have been loaded properly, FCoE vlans were correctly detected by fcoe-utils, but there was no connection between the server and the storage and the server could not detect any LUN. I also noticed that fcoeadm was reporting the following status: # fcoeadm -i Description: BCM57840 NetXtreme II Ethernet Multi Function Revision: 11 Manufacturer: Broadcom Inc. and subsidiaries Serial Number: 9440C953B7F0 Driver: bnx2x Unknown Number of Ports: 1 Symbolic Name: bnx2fc (QLogic BCM57840) v2.12.13 over ens3f2.4093-fco OS Device Name: host2 Node Name: 0x10000a3d27200005 Port Name: 0x10000a3d27200004 Fabric Name: 0x0 Speed: 20 Gbit Supported Speed: 1 Gbit, 10 Gbit MaxFrameSize: 2048 bytes FC-ID (Port ID): 0xffffffff State: Offline Description: BCM57840 NetXtreme II Ethernet Multi Function Revision: 11 Manufacturer: Broadcom Inc. and subsidiaries Serial Number: 9440C953B7F0 Driver: bnx2x Unknown Number of Ports: 1 Symbolic Name: bnx2fc (QLogic BCM57840) v2.12.13 over ens3f3.4094-fco OS Device Name: host3 Node Name: 0x10000a3d27200007 Port Name: 0x10000a3d27200006 Fabric Name: 0x0 Speed: 20 Gbit Supported Speed: 1 Gbit, 10 Gbit MaxFrameSize: 2048 bytes FC-ID (Port ID): 0xffffffff State: Offline Although most of information displayed was correct, the port state was always offline (what explains no storage connectivity) and the FC-ID reported was 0xffffffff for both interfaces. Supposing that something went wrong during the upgrade process, I decided to make a fresh install of the server and, for my surprise, the fcoe ports went online and all luns were detected correctly. Unfortunately, the ports went offline again after a dist-upgrade. Trying to understand what was happening I performed another fresh install of the Ubuntu 22.04, but this time collecting some information about kernel and packages versions from before and after dist-upgrade. What I discovered was that all packages related (fcoe-utils, lldpad) had the same versions before and after, the only exception was the kernel itself. Before the dist-upgrade the kernel in use was 5.15.0-25-generic and after dist-upgrade the kernel was 5.15.0-100-generic. Suspecting a kernel problem I installed and booted different kernel versions from 5.15.0-25 and 5.15.0-100 and discovered that the problem probably was introduced with kernel 5.15.0-94, since it is the first version showing the describe behavior. Looking at the changelog of linux-modules package, I noticed some changes on fcoe and other scsi modules, right after the 5.15.0-91 version. Could those changes be the cause of the behavior observed on my server or just a coincidence? Is there any fix to it? Thanks in advance. Anderson ProblemType: Bug DistroRelease: Ubuntu 22.04 Package: linux-image-5.15.0-94-generic 5.15.0-94.104 ProcVersionSignature: Ubuntu 5.15.0-94.104-generic 5.15.136 Uname: Linux 5.15.0-94-generic x86_64 AlsaDevices: total 0 crw-rw---- 1 root audio 116, 1 Mar 14 11:03 seq crw-rw---- 1 root audio 116, 33 Mar 14 11:03 timer AplayDevices: Error: [Errno 2] No such file or directory: 'aplay' ApportVersion: 2.20.11-0ubuntu82.5 Architecture: amd64 ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord' AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: CasperMD5CheckResult: unknown Date: Thu Mar 14 14:57:14 2024 HibernationDevice: RESUME=UUID=c4f1e832-fa46-4c58-913e-2093e8a4a4f0 IwConfig: Error: [Errno 2] No such file or directory: 'iwconfig' Lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 002: ID 0bda:0329 Realtek Semiconductor Corp. USB3.0-CRW Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 002 Device 002: ID 0424:2660 Microchip Technology, Inc. (formerly SMSC) Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Lsusb-t: /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/10p, 5000M |__ Port 4: Dev 2, If 0, Class=Mass Storage, Driver=usb-storage, 5000M /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/16p, 480M |__ Port 3: Dev 2, If 0, Class=Hub, Driver=hub/2p, 480M /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/8p, 480M MachineType: HPE Synergy 480 Gen10 PciMultimedia: ProcFB: 0 mgag200drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.15.0-94-generic root=UUID=68f15721-923a-4f78-aac8-18c987d7ef94 ro RelatedPackageVersions: linux-restricted-modules-5.15.0-94-generic N/A linux-backports-modules-5.15.0-94-generic N/A linux-firmware 20220329.git681281e4-0ubuntu3.29 RfKill: Error: [Errno 2] No such file or directory: 'rfkill' SourcePackage: linux UpgradeStatus: Upgraded to jammy on 2024-03-12 (2 days ago) dmi.bios.date: 10/26/2020 dmi.bios.release: 2.40 dmi.bios.vendor: HPE dmi.bios.version: I42 dmi.board.name: Synergy 480 Gen10 Compute Module dmi.board.vendor: HPE dmi.board.version: 10 A0 dmi.chassis.type: 28 dmi.chassis.vendor: HPE dmi.ec.firmware.release: 2.33 dmi.modalias: dmi:bvnHPE:bvrI42:bd10/26/2020:br2.40:efr2.33:svnHPE:pnSynergy480Gen10:pvr:rvnHPE:rnSynergy480Gen10ComputeModule:rvr10A0:cvnHPE:ct28:cvr:sku871940-B21: dmi.product.family: Synergy dmi.product.name: Synergy 480 Gen10 dmi.product.sku: 871940-B21 dmi.sys.vendor: HPE To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2057960/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
