hi @Andreas, a) OK, I've changed version the to 1.2.9-1ubuntu3.1 and attaching the debdiff. (I just thought it had to be changed since Noble's version was bumped, but happy to keep it)
b) The error was resolved by running with the sudo. Installing the package on other systems without this sound card works OK without errors. Pardon, I haven't addressed that earlier. ** Patch added: "alsa-ucm-conf_1.2.9-1ubuntu3.1.debdiff" https://bugs.launchpad.net/ubuntu/+source/alsa-ucm-conf/+bug/2042902/+attachment/5725820/+files/alsa-ucm-conf_1.2.9-1ubuntu3.1.debdiff -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to alsa-ucm-conf in Ubuntu. https://bugs.launchpad.net/bugs/2042902 Title: ucm2: soundwire: add rt713 SDCA device Status in OEM Priority Project: In Progress Status in alsa-ucm-conf package in Ubuntu: Fix Released Status in alsa-ucm-conf source package in Jammy: Incomplete Status in alsa-ucm-conf source package in Lunar: Incomplete Status in alsa-ucm-conf source package in Mantic: Incomplete Status in alsa-ucm-conf source package in Noble: Fix Released Bug description: [ Impact ] Affects devices with SoundWire-Audio Codec-ALC713 and SoundWire-Jack Codec-ALC713. Without correct configurations in userspace above codecs cannot be used. Thus in Settings > Sound > Output test doesn't produce sounds and Input device is greyed out. [ Fix ] Adding rt713 config files in ucm2 will allow to utilize those codecs. Upstream commit added support: https://github.com/alsa-project/alsa-ucm-conf/pull/363 [ Test Plan ] Device with the soundwire card $ cat /proc/asound/cards 0 [sofsoundwire ]: sof-soundwire - sof-soundwire Intel Soundwire SOF Before fix: 1. $ alsactl init alsa-lib utils.c:364:(uc_mgr_config_load_into) could not open configuration file /usr/share/alsa/ucm2/sof-soundwire/rt713.conf alsa-lib parser.c:77:(uc_mgr_config_load_file) error: failed to open file /usr/share/alsa/ucm2/sof-soundwire/rt713.conf: -2 alsa-lib main.c:1412:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2 Found hardware: "sof-soundwire" "Intel Meteorlake HDMI" "HDA:8086281d,80860101,00100000 cfg-spk:2 cfg-amp:2 hs:rt713-sdca spk:rt1316 mic:rt713-dmic" "" "" Hardware is initialized using a generic method 2. $ amixer contents ... numid=24,iface=MIXER,name='Headphone Switch' ; type=BOOLEAN,access=rw------,values=1 : values=off ... numid=33,iface=MIXER,name='IEC958 Playback Switch' ; type=BOOLEAN,access=rw------,values=1 : values=off After fix: after adding patch files 1. $ alsactl init alsa-lib main.c:779:(execute_sequence) exec '/bin/rm -rf /var/lib/alsa/card0.conf.d' failed (exit code 1) (note: assuming that failed to remove the empty directory is not a critical problem) 2. $ amixer contents ... numid=24,iface=MIXER,name='Headphone Switch' ; type=BOOLEAN,access=rw------,values=1 : values=on ... numid=33,iface=MIXER,name='IEC958 Playback Switch' ; type=BOOLEAN,access=rw------,values=1 : values=on [Where problems could occur] * This change adds new hardware support. * The change only adds new hardware support, it will not affect other codec device. To manage notifications about this bug go to: https://bugs.launchpad.net/oem-priority/+bug/2042902/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp