Thank you for the updated documentation here: https://wiki.ubuntu.com/RISC-V/StarFive%20VisionFive%202 Finally a hint how to get this working...
Using the brand new image from here: https://cdimage.ubuntu.com/releases/23.10/release/ubuntu-23.10-preinstalled- server-riscv64+visionfive2.img.xz The image only boots with the patched u-boot from here: https://launchpad.net/~ubuntu-risc-v- team/+archive/ubuntu/release/+sourcefiles/u-boot- starfive/2023.09.22-next-5d2fae79c7d6-0ubuntu1~ppa4/u-boot- starfive_2023.09.22-next-5d2fae79c7d6.orig.tar.xz Follow the instructions in the chapter "Updating U-Boot". Do not use the vendor U-Boot and do not forget to reset the environment to the defaults. ** Changed in: linux (Ubuntu) Status: Confirmed => Fix Released -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2033399 Title: Boot failure on VisionFive2 board with Mantic daily-preinstalled. Status in linux package in Ubuntu: Fix Released Bug description: The Mantic preinstalled SD card image for the VisionFive2 board does not boot. I tested this on one v1.3B board with 4GB RAM. Older Mantic images are booting, which was last tested with the daily-preinstalled from 20.Jul . Attached are the UART logs of the working and the non-working image. Both images were tested on the same VisionFive2 board. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2033399/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
