@JOHN VINCENT Sorry for the late reply. Yes, usually the bug verification is done by the person who raised the issue to confirm the problem is solved. No need to reinstall the entire OS for this fix, just upgrade to the desired kernel version. The change is currently in -proposed. Next week the new kernels should land in -updates. - focal: 5.4.0-164.181 - lunar: 6.2.0-34.34 - jammy: 5.15.0-85.95
To install a kernel from -proposed, I include -proposed to the apt-repository list: sudo add-apt-repository ppa:canonical-kernel-team/proposed And then install the desired version. You can also check this official page for more info on how to test from -proposed pocket. https://wiki.ubuntu.com/Testing/EnableProposed -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/2022361 Title: Please enable Renesas RZ platform serial installer Status in linux package in Ubuntu: Fix Released Status in linux source package in Focal: Fix Committed Status in linux source package in Jammy: Fix Committed Status in linux source package in Lunar: Fix Committed Status in linux source package in Mantic: Fix Released Bug description: [Impact] The ubuntu installer does not work via serial ports for Renesas boards like RZ/G2M-HiHope (https://www.renesas.com/us/en/products/microcontrollers-microprocessors/rz-mpus/rzg2m-hihope-rzg2m-reference-board, RZ/G2L, RZ/G2LC, RZ/G2UL SMARC Board (https://renesas.info/wiki/RZ-G/RZ-G2L_SMARC). The installation can be done using HDMI ports, but it would be nice to support installation via serial port as well. [Test case] Try to install Ubuntu on a Renesas board. [Fix] Statically build SuperH SCI(F) serial port support (with earlyconsole). [Regression potential] Statically building an additional driver in the kernel can make the kernel image bigger, potentially causing boot issues in small (arm64 / armhf) platforms. [Original bug report] Package: linux Version: Ubuntu-6.2.0-21.21 Severity: normal File: /mantic/debian.master/config/annotations Dear Maintainer, The ubuntu kernel is missing a few configuration options for Renesas RZ/G2M MPU as below: #Modify the following config from m to y. CONFIG_SERIAL_SH_SCI=y #add below configuration CONFIG_SERIAL_SH_SCI_CONSOLE=y CONFIG_SERIAL_SH_SCI_EARLYCON=y The above changes are required in annotations file: "/mantic/debian.master/config/annotations" code location: https://git.launchpad.net/~ubuntu- kernel/ubuntu/+source/linux/+git/mantic/tree/debian.master/config/annotations#n11372 #Modify the following line (change 'm' to 'y') CONFIG_SERIAL_SH_SCI policy<{'arm64': 'y', 'armhf': 'y'}> #Add the following lines: CONFIG_SERIAL_SH_SCI_CONSOLE policy<{'arm64': 'y', 'armhf': 'y'}> CONFIG_SERIAL_SH_SCI_EARLYCON policy<{'arm64': 'y', 'armhf': 'y'}> Could you please add those configuration options to the Ubuntu kernel? Best Regards John To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2022361/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
