Ubuntu 20.04.5 LTS
xen-hypervisor-4.11-amd64  4.11.3+24-g14b62ab3e5-1ubuntu2.3

Reverted back to kernel 5.4.0-135 and bridging with Xen VMs is working
again.

Spent the day trying to work out why bridging suddenly stopped working.
Guest is 18.04.6 LTS.

I'm pretty sure that under 137, the path cost was 100 for enp6s0f0,
instead of the 19 it shows now.

brctl showstp xenbr1
xenbr1
 bridge id              8000.90e2ba065da8
 designated root        8000.90e2ba065da8
 root port                 0                    path cost                  0
 max age                  20.00                 bridge max age            20.00
 hello time                2.00                 bridge hello time          2.00
 forward delay            15.00                 bridge forward delay      15.00
 ageing time             300.00
 hello timer               0.00                 tcn timer                  0.00
 topology change timer     0.00                 gc timer                 230.64
 flags                  


enp6s0f0 (1)
 port id                8001                    state                forwarding
 designated root        8000.90e2ba065da8       path cost                 19
 designated bridge      8000.90e2ba065da8       message age timer          0.00
 designated port        8001                    forward delay timer        0.00
 designated cost           0                    hold timer                 0.00
 flags                  

vif1.0 (2)
 port id                8002                    state                forwarding
 designated root        8000.90e2ba065da8       path cost                100
 designated bridge      8000.90e2ba065da8       message age timer          0.00
 designated port        8002                    forward delay timer        0.00
 designated cost           0                    hold timer                 0.00
 flags

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-meta in Ubuntu.
https://bugs.launchpad.net/bugs/2002834

Title:
  Network bridge issue after updating kernel to 5.4.0-137

Status in linux-meta package in Ubuntu:
  Confirmed

Bug description:
  Hello,

  After updating the kernel from 5.4.0-136 to 5.4.0-137 network bridge are not 
working any more.
  I can see the bridge with "ip add show" or "brctl show". Network is up and I 
can reach the full network from the host through the bridge.

  VM on the host can not reach network or host and host can not reach
  the VM through the bridge.

  We have bonded interface used in the bridge and one bridge without IP
  and one with an IP. DHCP is off on booth bridge.

  Downgrading the kernel to 5.4.136 (Ubuntu 5.4.0-136.153-generic
  5.4.218) seem to work fine.

  Thank you for your help.

  Details
  Description:  Ubuntu 20.04.5 LTS
  Release:      20.04
  Not working version => Ubuntu 5.4.0-137.154-generic 5.4.218

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux-meta/+bug/2002834/+subscriptions


-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to     : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

Reply via email to