Update from OEM:
Hi Rick and Jeff,
I have tested those packages. E823 can be recognized by Ubuntu 18.04.6
OS(kernel ) and i can use them to ping “www.google.com”
But the name is not complete when I use "lspci" command and some pkgs
have dependency issue when I installed. “linux-cloud-
tools-5.4.0-136-generic_5.4.0-136.153_amd64.deb and linux-
tools-5.4.0-136-generic_5.4.0-136.153_amd64.deb”
Test result is below===
root@hakuba:~# uname -mrs
Linux 5.4.0-136-generic x86_64
root@hakuba:~#
root@hakuba:~# ethtool -i eno6
driver: ice
version: 0.8.1-k
firmware-version: 2.28 0x8001028e 0.0.0
expansion-rom-version:
bus-info: 0000:89:00.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: yes
root@hakuba:~# lspci |grep -i ethernet
03:00.0 Ethernet controller: Intel Corporation Device 125d (rev 04)
04:00.0 Ethernet controller: Intel Corporation Device 125d (rev 04)
89:00.0 Ethernet controller: Intel Corporation Device 188e
89:00.1 Ethernet controller: Intel Corporation Device 188e
89:00.2 Ethernet controller: Intel Corporation Device 188e
89:00.3 Ethernet controller: Intel Corporation Device 188e
root@hakuba:~# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group
default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eno6: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP
group default qlen 1000
link/ether 00:00:00:00:01:00 brd ff:ff:ff:ff:ff:ff
inet 10.241.99.166/24 brd 10.241.99.255 scope global eno6
valid_lft forever preferred_lft forever
inet6 fe80::200:ff:fe00:100/64 scope link
valid_lft forever preferred_lft forever
3: eno5: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default
qlen 1000
link/ether 00:00:00:00:01:01 brd ff:ff:ff:ff:ff:ff
4: eno4: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default
qlen 1000
link/ether 00:00:00:00:01:02 brd ff:ff:ff:ff:ff:ff
5: eno3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default
qlen 1000
link/ether 00:00:00:00:01:03 brd ff:ff:ff:ff:ff:ff
root@hakuba:~# ping www.google.com
PING www.google.com (142.250.186.132) 56(84) bytes of data.
64 bytes from fra24s07-in-f4.1e100.net (142.250.186.132): icmp_seq=1 ttl=105
time=266 ms
64 bytes from fra24s07-in-f4.1e100.net (142.250.186.132): icmp_seq=2 ttl=105
time=266 ms
64 bytes from fra24s07-in-f4.1e100.net (142.250.186.132): icmp_seq=3 ttl=105
time=265 ms
64 bytes from fra24s07-in-f4.1e100.net (142.250.186.132): icmp_seq=4 ttl=105
time=265 ms
64 bytes from fra24s07-in-f4.1e100.net (142.250.186.132): icmp_seq=5 ttl=105
time=265 ms
64 bytes from fra24s07-in-f4.1e100.net (142.250.186.132): icmp_seq=6 ttl=105
time=265 ms
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1986717
Title:
Update ice driver to support E823 devices
Status in linux package in Ubuntu:
In Progress
Bug description:
SRU Justification:
Impact:
Ice driver does not support E823 in 5.4. This was introduced in 5.7, but is
part of the Ice Lake D platform which is otherwise supported in 5.4. One of
the hardware vendors has requested that we update Ice in 5.4 to support E823.
Fix:
After talking with engineers upstream this should be the only patch needed to
add the support that is missing in 5.4
e36aeec0f4e5 ice: add support for E823 devices
Testcase:
Load ice driver on system with E823 device present and ensure the device is
seen by the system
Other Info:
https://code.launchpad.net/~mreed8855/ubuntu/+source/linux/+git/focal/+ref/e823_intel_3
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1986717/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : [email protected]
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
