Re-titling bug report to avoid printing unprintable characters in the
kernel upload changelog.
** Description changed:
+ earlyconsole prints ������������������������ on 5.19.0-1002-generic
+
[ Impact ]
* When adding earlycon to the kernel command line on the
SiFive Unmatched board the serial console will print garbage
halfway through booting until entering userspace and other
other drivers are loaded.
* The problem is the UART driver doesn't claim its clocks
properly so the PWM driver will turn off the parent clock
until PWM is needed for the LEDs on the board.
* Compiling the PWM driver as a module so it will be loaded
at the same time the LED drivers are loaded is a workaround
- until the following patch is backported
+ until the following patch is backported
643792048ee8 ("serial: sifive: enable clocks for UART when probed")
* Only the SoCs on the SiFive Unleashed and Unmatched boards use
this PWM driver, but none of them need it at boot time, so should
be harmless.
[ Test Plan ]
* Add earlycon and watch the serial console while booting.
* Test that PWM leds still work after the PWM driver module is loaded.
[ Where problems could occur ]
* There might be a hidden dependency on loading the PWM driver early.
[ Other Info ]
Original bug description:
With Kernel 5.19.0-1002-generic on the SiFive Unmatched earlyconsole
output looks like:
EFI stub: Booting Linux Kernel...
EFI stub: Using DTB from configuration table
EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path
EFI stub: Exiting boot services...
�������������������������������������������
With a defconfig 5.19.6 kernel this does not occr.
** Summary changed:
- earlyconsole prints ������������������������ on 5.19.0-1002-generic
+ earlyconsole prints question marks on 5.19.0-1002-generic
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-meta-riscv in Ubuntu.
https://bugs.launchpad.net/bugs/1988984
Title:
earlyconsole prints question marks on 5.19.0-1002-generic
Status in linux-meta-riscv package in Ubuntu:
New
Bug description:
earlyconsole prints ������������������������ on 5.19.0-1002-generic
[ Impact ]
* When adding earlycon to the kernel command line on the
SiFive Unmatched board the serial console will print garbage
halfway through booting until entering userspace and other
other drivers are loaded.
* The problem is the UART driver doesn't claim its clocks
properly so the PWM driver will turn off the parent clock
until PWM is needed for the LEDs on the board.
* Compiling the PWM driver as a module so it will be loaded
at the same time the LED drivers are loaded is a workaround
until the following patch is backported
643792048ee8 ("serial: sifive: enable clocks for UART when probed")
* Only the SoCs on the SiFive Unleashed and Unmatched boards use
this PWM driver, but none of them need it at boot time, so should
be harmless.
[ Test Plan ]
* Add earlycon and watch the serial console while booting.
* Test that PWM leds still work after the PWM driver module is
loaded.
[ Where problems could occur ]
* There might be a hidden dependency on loading the PWM driver early.
[ Other Info ]
Original bug description:
With Kernel 5.19.0-1002-generic on the SiFive Unmatched earlyconsole
output looks like:
EFI stub: Booting Linux Kernel...
EFI stub: Using DTB from configuration table
EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path
EFI stub: Exiting boot services...
�������������������������������������������
With a defconfig 5.19.6 kernel this does not occr.
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux-meta-riscv/+bug/1988984/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : [email protected]
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
