@Kent,
The ECLite driver communication over ISHTP can be tested as follows:
a) "cat /sys/class/thermal/thermal_zone0/temp" - for reading temperature
from EC-Lite.
Note 1: "cat /sys/class/thermal/thermal_zone0/type" should read "acpitz"
- This is EC-Lite's thermal zone
Note 2: You can stress the CPU and read temp again to see a change. For
stressing the CPU, you can use Checkbox itself.
Eg Checkbox command: cdts.checkbox-cli run
com.canonical.certification::stress/cpu_stress_ng_test
If a battery is connected -
- /sys/class/power_supply/BAT0 will be populated.
eg.
cat /sys/class/power_supply/BAT0/present
1
cat /sys/class/power_supply/BAT0/status
Discharging
You can try to turn on/off FAN manually as well – Commands attached
** Attachment added: "Commands to turn on/off Fan"
https://bugs.launchpad.net/intel/+bug/1929895/+attachment/5577487/+files/EClite-Fan-commands.png
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-intel-5.13 in Ubuntu.
https://bugs.launchpad.net/bugs/1929895
Title:
[EHL] Enable ISHTP
Status in intel:
Fix Committed
Status in intel lookout-canyon series:
Fix Released
Status in linux package in Ubuntu:
Fix Committed
Status in linux-intel-5.13 package in Ubuntu:
Invalid
Status in linux source package in Focal:
New
Status in linux-intel-5.13 source package in Focal:
Fix Committed
Bug description:
Description
This driver enables the OS to talk to eclite firmware on a dedicated
low power chip over ISH Transport Protocol (ISHTP)
Hardware: Elkhart Lake
Target Release: 21.04
Target Kernel: TBD
External links:
https://github.com/intel/linux-intel-quilt/tree/mainline-tracking-v5.11-yocto-210223T083754Z
To manage notifications about this bug go to:
https://bugs.launchpad.net/intel/+bug/1929895/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
