[Expired for linux (Ubuntu) because there has been no activity for 60
days.]
** Changed in: linux (Ubuntu)
Status: Incomplete => Expired
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/688703
Title:
[lucid] netxen_nic driver and ethernet bonding broken at boot time
Status in “linux” package in Ubuntu:
Expired
Bug description:
A HP Proliant DL360 G6 system running Lucid 64-bit (only certified by
Canonical for 9.04 64bit and 10.10 32bit [1]) is using a dual-port
netxen_nic-based ethernet device.
When ethernet bonding is configured via /etc/network/interfaces [2]
the bonded device appears to exist [5] but does not work. Upon
restarting the networking service [3] the device works as expected.
The bonded device also works when configured manually [4]. This used
to work with Hardy.
Apport information from the affected system is forthcoming.
---------------------------------------------------
[1] http://webapps.ubuntu.com/certification/make/HP/servers
[2]
auto bond0
iface bond0 inet static
address 10.2.10.70
netmask 255.255.0.0
broadcast 10.2.255.255
gateway 10.2.10.254
slaves eth0 eth1
bond-mode 1
bond-miimon 100
[3] sudo /etc/init.d/networking restart
[4]
$ sudo modprobe -r bonding
$ sudo modprobe bonding mode=active-backup miimon=100
$ sudo ifconfig bond0 10.2.10.70 netmask 255.255.0.0
$ sudo ifenslave bond0 eth0 eth1
$ ifconfig bond0
$ cat /proc/net/bonding/bond0
[5]
$ dmesg | grep bonding
[ 6.403320] bonding: Warning: either miimon or arp_interval and arp_ip_target
module parameters must be specified, otherwise bonding will not detect link
failures! see bonding.txt for details.
[ 6.405552] bonding: bond0: doing slave updates when interface is down.
[ 6.405555] bonding: bond0: Adding slave eth0.
[ 6.405557] bonding bond0: master_dev is not up in bond_enslave
[ 7.192670] bonding: bond0: enslaving eth0 as an active interface with an up
link.
[ 7.194312] bonding: bond0: doing slave updates when interface is down.
[ 7.194315] bonding: bond0: Adding slave eth1.
[ 7.194317] bonding bond0: master_dev is not up in bond_enslave
[ 7.721406] bonding: bond0: enslaving eth1 as an active interface with an up
link.
[ 7.722009] bonding: bond0: setting mode to active-backup (1).
[ 7.722029] bonding: bond0: Setting MII monitoring interval to 100.
$ ifconfig
bond0 Link encap:Ethernet HWaddr f4:ce:46:af:58:40
inet addr:10.2.10.70 Bcast:10.1.255.255 Mask:255.255.0.0
inet6 addr: fe80::f6ce:46ff:feaf:5840/64 Scope:Link
UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:216 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:14159 (14.1 KB)
eth0 Link encap:Ethernet HWaddr f4:ce:46:af:58:40
UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:216 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:14159 (14.1 KB)
Interrupt:62
eth1 Link encap:Ethernet HWaddr f4:ce:46:af:58:40
UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:66
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:77 errors:0 dropped:0 overruns:0 frame:0
TX packets:77 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:7050 (7.0 KB) TX bytes:7050 (7.0 KB)
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/688703/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
