This bug was fixed in the package linux-oem-5.10 - 5.10.0-1029.30
---------------
linux-oem-5.10 (5.10.0-1029.30) focal; urgency=medium
* focal/linux-oem-5.10: 5.10.0-1029.30 -proposed tracker (LP:
#1930076)
* CVE-2021-33200
- bpf: Wrap aux data inside bpf_sanitize_info container
- bpf: Fix mask direction swap upon off reg sign change
- bpf: No need to simulate speculative domain for immediates
linux-oem-5.10 (5.10.0-1028.29) focal; urgency=medium
* focal/linux-oem-5.10: 5.10.0-1028.29 -proposed tracker (LP:
#1929167)
* Packaging resync (LP: #1786013)
- update dkms package versions
* TGL-H system NV GPU fallen off the bus after resuming from s2idle with the
external display connected via docking station (LP: #1929166)
- SAUCE: ACPI: avoid NVIDIA GPU fallen with an _OSI string
* AX201 BT will cause system could not enter S0i3 (LP: #1928047)
- drm/i915: Tweaked Wa_14010685332 for all PCHs
* Realtek USB hubs in Dell WD19SC/DC/TB fail to work after exiting s2idle
(LP: #1928242)
- USB: Verify the port status when timeout happens during port suspend
- Revert "USB: Add reset-resume quirk for WD19's Realtek Hub"
* Support mic-mute on Dell's platform (LP: #1928750)
- ASoC: rt715: add main capture switch and main capture volume
- ASoC: rt715: remove kcontrols which no longer be used
- ASoC: rt715: modification for code simplicity
- platform/x86: Move all dell drivers to their own subdirectory
- SAUCE: platform/x86: dell-privacy: Add support for Dell hardware privacy
- SAUCE: ASoC: rt715:add micmute led state control supports
- [Config] Update configs for Dell's E-Privacy
linux-oem-5.10 (5.10.0-1027.28) focal; urgency=medium
* focal/linux-oem-5.10: 5.10.0-1027.28 -proposed tracker (LP:
#1927620)
* Introduce the 465 driver series, fabric-manager, and libnvidia-nscq
(LP: #1925522)
- debian/dkms-versions -- add NVIDIA 465 and migrate 450 to 460
* Packaging resync (LP: #1786013)
- update dkms package versions
* On TGL platforms screen shows garbage when browsing website by scrolling
mouse (LP: #1926579)
- SAUCE: drm/i915/display: Disable PSR2 if TGL Display stepping is B1 from
A0
* Add s2idle support on AMD Renoir and Cezanne (LP: #1927067)
- drm/amd/display: setup system context in dm_init
- drm/amd/display: add S/G support for Renoir
- drm/amdgpu: drop extra drm_kms_helper_poll_enable/disable calls
- drm/amdgpu: use runpm flag rather than fbcon for kfd runtime suspend (v2)
- drm/amdgpu: reset runpm flag if device suspend fails
- drm/amdgpu: add s0i3 capacity check for s0i3 routine (v2)
- drm/amdgpu: add amdgpu_gfx_state_change_set() set gfx power change entry
(v2)
- drm/amdgpu: update amdgpu device suspend/resume sequence for s0i3 support
- drm/amd/pm: add gfx_state_change_set() for rn gfx power switch (v2)
- drm/amdgpu: add judgement for suspend/resume sequence
- drm/amdgpu/pm: no need GPU status set since
mmnbif_gpu_BIF_DOORBELL_FENCE_CNTL added in FSDL
- drm/amdgpu: fix shutdown and poweroff process failed with s0ix
- drm/amdgpu: Only check for S0ix if AMD_PMC is configured
- drm/amdgpu: fix S0ix handling when the CONFIG_AMD_PMC=m
- drm/amdgpu: fix the hibernation suspend with s0ix
- drm/amdgpu: rework S3/S4/S0ix state handling
- drm/amdgpu: don't evict vram on APUs for suspend to ram (v4)
- drm/amdgpu: clean up non-DC suspend/resume handling
- drm/amdgpu: move s0ix check into amdgpu_device_ip_suspend_phase2 (v3)
- drm/amdgpu: re-enable suspend phase 2 for S0ix
- drm/amdgpu/swsmu: skip gfx cgpg on s0ix suspend
- drm/amdgpu: update comments about s0ix suspend/resume
- drm/amdgpu: skip CG/PG for gfx during S0ix
- drm/amdgpu: drop S0ix checks around CG/PG in suspend
- drm/amdgpu: skip kfd suspend/resume for S0ix
- platform/x86: amd-pmc: Add AMD platform support for S2Idle
- platform/x86: amd-pmc: Fix CONFIG_DEBUG_FS check
- platform/x86: amd-pmc: put device on error paths
- ACPI: PM: s2idle: Add AMD support to handle _DSM
- [Config] Enable CONFIG_AMD_PMC=m
- SAUCE: ACPI / idle: override and update c-state latency when not
conformance
with s0ix
- SAUCE: usb: pci-quirks: disable D3cold on AMD xhci suspend for s2idle
- SAUCE: PCI: quirks: Quirk PCI d3hot delay for AMD xhci
- SAUCE: Move ASPM quirk flag to MSB
- SAUCE: nvme: put some AMD PCIE downstream NVME device to simple
suspend/resume path
- SAUCE: platform/x86: Add missing LPS0 functions for AMD
- SAUCE: platform/x86: force LPS0 functions for AMD
* [SRU] Patch for flicker and glitching on common LCD display panels, intel
framebuffer (LP: #1925685)
- drm/i915: Try to use fast+narrow link on eDP again and fall back to the
old
max strategy on failure
- SAUCE: drm/i915/dp: Use slow and wide link training for everything
* Fix kernel panic at boot on dual GFX systems (LP: #1926792)
- drm/amdgpu: Register VGA clients after init can no longer fail
* CirrusLogic: The default input volume is "0%" (LP: #1923557)
- SAUCE: ALSA: hda/cirrus: Set Initial DMIC volume for Bullseye to -26 dB
* Enable mute/micmute LEDs and limit mic boost on EliteBook 845 G8
(LP: #1925415)
- ALSA: hda/realtek: Enable mute/micmute LEDs and limit mic boost on
EliteBook
845 G8
* An recursive locking in igb and igc drivers (LP: #1926564)
- SAUCE: net: called rtnl_unlock() before runpm resumes devices
* backport Intel IPU6 camera driver updates 20210421 (LP: #1926275)
- SAUCE: Fix ov01a1s IQ issues
* Focal update: v5.10.35 upstream stable release (LP: #1927915)
- mips: Do not include hi and lo in clobber list for R6
- netfilter: conntrack: Make global sysctls readonly in non-init netns
- net: usb: ax88179_178a: initialize local variables before use
- igb: Enable RSS for Intel I211 Ethernet Controller
- bpf: Fix masking negation logic upon negative dst register
- bpf: Fix leakage of uninitialized bpf stack under speculation
- net: qrtr: Avoid potential use after free in MHI send
- perf data: Fix error return code in perf_data__create_dir()
- capabilities: require CAP_SETFCAP to map uid 0
- perf ftrace: Fix access to pid in array when setting a pid filter
- tools/cgroup/slabinfo.py: updated to work on current kernel
- driver core: add a min_align_mask field to struct device_dma_parameters
- swiotlb: add a IO_TLB_SIZE define
- swiotlb: factor out an io_tlb_offset helper
- swiotlb: factor out a nr_slots helper
- swiotlb: clean up swiotlb_tbl_unmap_single
- swiotlb: refactor swiotlb_tbl_map_single
- swiotlb: don't modify orig_addr in swiotlb_tbl_sync_single
- swiotlb: respect min_align_mask
- nvme-pci: set min_align_mask
- ovl: fix leaked dentry
- ovl: allow upperdir inside lowerdir
- ALSA: usb-audio: Add MIDI quirk for Vox ToneLab EX
- USB: Add reset-resume quirk for WD19's Realtek Hub
- platform/x86: thinkpad_acpi: Correct thermal sensor allocation
- perf/core: Fix unconditional security_locked_down() call
- vfio: Depend on MMU
- Linux 5.10.35
* r8152 tx status -71 (LP: #1922651) // Focal update: v5.10.35 upstream stable
release (LP: #1927915)
- USB: Add LPM quirk for Lenovo ThinkPad USB-C Dock Gen2 Ethernet
* Focal update: v5.10.34 upstream stable release (LP: #1927914)
- iwlwifi: Fix softirq/hardirq disabling in iwl_pcie_gen2_enqueue_hcmd()
- mei: me: add Alder Lake P device id.
- Linux 5.10.34
* Focal update: v5.10.33 upstream stable release (LP: #1927913)
- vhost-vdpa: protect concurrent access to vhost device iotlb
- gpio: omap: Save and restore sysconfig
- KEYS: trusted: Fix TPM reservation for seal/unseal
- vdpa/mlx5: Set err = -ENOMEM in case dma_map_sg_attrs fails
- pinctrl: lewisburg: Update number of pins in community
- block: return -EBUSY when there are open partitions in blkdev_reread_part
- pinctrl: core: Show pin numbers for the controllers with base = 0
- arm64: dts: allwinner: Revert SD card CD GPIO for Pine64-LTS
- bpf: Permits pointers on stack for helper calls
- bpf: Allow variable-offset stack access
- bpf: Refactor and streamline bounds check into helper
- bpf: Tighten speculative pointer arithmetic mask
- locking/qrwlock: Fix ordering in queued_write_lock_slowpath()
- perf/x86/intel/uncore: Remove uncore extra PCI dev HSWEP_PCI_PCU_3
- perf/x86/kvm: Fix Broadwell Xeon stepping in isolation_ucodes[]
- perf auxtrace: Fix potential NULL pointer dereference
- perf map: Fix error return code in maps__clone()
- HID: google: add don USB id
- HID: alps: fix error return code in alps_input_configured()
- HID cp2112: fix support for multiple gpiochips
- HID: wacom: Assign boolean values to a bool variable
- soc: qcom: geni: shield geni_icc_get() for ACPI boot
- dmaengine: xilinx: dpdma: Fix descriptor issuing on video group
- dmaengine: xilinx: dpdma: Fix race condition in done IRQ
- ARM: dts: Fix swapped mmc order for omap3
- net: geneve: check skb is large enough for IPv4/IPv6 header
- dmaengine: tegra20: Fix runtime PM imbalance on error
- s390/entry: save the caller of psw_idle
- arm64: kprobes: Restore local irqflag if kprobes is cancelled
- xen-netback: Check for hotplug-status existence before watching
- cavium/liquidio: Fix duplicate argument
- kasan: fix hwasan build for gcc
- csky: change a Kconfig symbol name to fix e1000 build error
- ia64: fix discontig.c section mismatches
- ia64: tools: remove duplicate definition of ia64_mf() on ia64
- x86/crash: Fix crash_setup_memmap_entries() out-of-bounds access
- net: hso: fix NULL-deref on disconnect regression
- USB: CDC-ACM: fix poison/unpoison imbalance
- Linux 5.10.33
* Focal update: v5.10.32 upstream stable release (LP: #1927912)
- net/sctp: fix race condition in sctp_destroy_sock
- mtd: rawnand: mtk: Fix WAITRDY break condition and timeout
- Input: nspire-keypad - enable interrupts only when opened
- gpio: sysfs: Obey valid_mask
- dmaengine: idxd: Fix clobbering of SWERR overflow bit on writeback
- dmaengine: idxd: fix delta_rec and crc size field for completion record
- dmaengine: idxd: fix opcap sysfs attribute output
- dmaengine: idxd: fix wq size store permission state
- dmaengine: dw: Make it dependent to HAS_IOMEM
- dmaengine: Fix a double free in dma_async_device_register
- dmaengine: plx_dma: add a missing put_device() on error path
- dmaengine: idxd: fix wq cleanup of WQCFG registers
- ACPI: x86: Call acpi_boot_table_init() after acpi_table_upgrade()
- ARM: dts: Drop duplicate sha2md5_fck to fix clk_disable race
- ARM: dts: Fix moving mmc devices with aliases for omap4 & 5
- lockdep: Add a missing initialization hint to the "INFO: Trying to
register
non-static key" message
- arc: kernel: Return -EFAULT if copy_to_user() fails
- iwlwifi: Fix softirq/hardirq disabling in iwl_pcie_enqueue_hcmd()
- xfrm: BEET mode doesn't support fragments for inner packets
- ASoC: max98373: Changed amp shutdown register as volatile
- ASoC: max98373: Added 30ms turn on/off time delay
- gpu/xen: Fix a use after free in xen_drm_drv_init
- neighbour: Disregard DEAD dst in neigh_update
- ARM: keystone: fix integer overflow warning
- ARM: omap1: fix building with clang IAS
- drm/msm: Fix a5xx/a6xx timestamps
- ASoC: fsl_esai: Fix TDM slot setup for I2S mode
- scsi: scsi_transport_srp: Don't block target in SRP_PORT_LOST state
- iwlwifi: add support for Qu with AX201 device
- net: ieee802154: stop dump llsec keys for monitors
- net: ieee802154: forbid monitor for add llsec key
- net: ieee802154: forbid monitor for del llsec key
- net: ieee802154: stop dump llsec devs for monitors
- net: ieee802154: forbid monitor for add llsec dev
- net: ieee802154: forbid monitor for del llsec dev
- net: ieee802154: stop dump llsec devkeys for monitors
- net: ieee802154: forbid monitor for add llsec devkey
- net: ieee802154: forbid monitor for del llsec devkey
- net: ieee802154: stop dump llsec seclevels for monitors
- net: ieee802154: forbid monitor for add llsec seclevel
- pcnet32: Use pci_resource_len to validate PCI resource
- mac80211: clear sta->fast_rx when STA removed from 4-addr VLAN
- virt_wifi: Return micros for BSS TSF values
- lib: fix kconfig dependency on ARCH_WANT_FRAME_POINTERS
- Input: s6sy761 - fix coordinate read bit shift
- Input: i8042 - fix Pegatron C15B ID entry
- HID: wacom: set EV_KEY and EV_ABS only for non-HID_GENERIC type of devices
- dm verity fec: fix misaligned RS roots IO
- readdir: make sure to verify directory entry for legacy interfaces too
- arm64: fix inline asm in load_unaligned_zeropad()
- arm64: alternatives: Move length validation in alternative_{insn, endif}
- vfio/pci: Add missing range check in vfio_pci_mmap
- riscv: Fix spelling mistake "SPARSEMEM" to "SPARSMEM"
- scsi: libsas: Reset num_scatter if libata marks qc as NODATA
- ixgbe: fix unbalanced device enable/disable in suspend/resume
- netfilter: flowtable: fix NAT IPv6 offload mangling
- netfilter: conntrack: do not print icmpv6 as unknown via /proc
- ice: Fix potential infinite loop when using u8 loop counter
- libnvdimm/region: Fix nvdimm_has_flush() to handle ND_REGION_ASYNC
- netfilter: bridge: add pre_exit hooks for ebtable unregistration
- netfilter: arp_tables: add pre_exit hook for table unregister
- libbpf: Fix potential NULL pointer dereference
- net: macb: fix the restore of cmp registers
- net/mlx5e: fix ingress_ifindex check in mlx5e_flower_parse_meta
- netfilter: nft_limit: avoid possible divide error in nft_limit_init
- net/mlx5e: Fix setting of RS FEC mode
- net: davicom: Fix regulator not turned off on failed probe
- net: sit: Unregister catch-all devices
- net: ip6_tunnel: Unregister catch-all devices
- mm: ptdump: fix build failure
- net: Make tcp_allowed_congestion_control readonly in non-init netns
- i40e: fix the panic when running bpf in xdpdrv mode
- ethtool: pause: make sure we init driver stats
- ia64: remove duplicate entries in generic_defconfig
- ia64: tools: remove inclusion of ia64-specific version of errno.h header
- ibmvnic: avoid calling napi_disable() twice
- ibmvnic: remove duplicate napi_schedule call in do_reset function
- ibmvnic: remove duplicate napi_schedule call in open function
- ch_ktls: Fix kernel panic
- ch_ktls: fix device connection close
- ch_ktls: tcb close causes tls connection failure
- ch_ktls: do not send snd_una update to TCB in middle
- gro: ensure frag0 meets IP header alignment
- ARM: OMAP2+: Fix warning for omap_init_time_of()
- ARM: 9069/1: NOMMU: Fix conversion for_each_membock() to
for_each_mem_range()
- ARM: footbridge: fix PCI interrupt mapping
- ARM: OMAP2+: Fix uninitialized sr_inst
- arm64: dts: allwinner: Fix SD card CD GPIO for SOPine systems
- arm64: dts: allwinner: h6: beelink-gs1: Remove ext. 32 kHz osc reference
- bpf: Use correct permission flag for mixed signed bounds arithmetic
- KVM: VMX: Convert vcpu_vmx.exit_reason to a union
- KVM: VMX: Don't use vcpu->run->internal.ndata as an array index
- r8169: tweak max read request size for newer chips also in jumbo mtu mode
- r8169: don't advertise pause in jumbo mode
- bpf: Ensure off_reg has no mixed signed bounds for all types
- bpf: Move off_reg into sanitize_ptr_alu
- ARM: 9071/1: uprobes: Don't hook on thumb instructions
- arm64: mte: Ensure TIF_MTE_ASYNC_FAULT is set atomically
- bpf: Rework ptr_limit into alu_limit and add common error path
- bpf: Improve verifier error messages for users
- bpf: Move sanitize_val_alu out of op switch
- net: phy: marvell: fix detection of PHY on Topaz switches
- Linux 5.10.32
-- Thadeu Lima de Souza Cascardo <casca...@canonical.com> Fri, 28 May
2021 20:39:15 -0300
** Changed in: linux-oem-5.10 (Ubuntu Focal)
Status: Fix Committed => Fix Released
** CVE added: https://cve.mitre.org/cgi-bin/cvename.cgi?name=2021-33200
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1928242
Title:
Realtek USB hubs in Dell WD19SC/DC/TB fail to work after exiting
s2idle
Status in HWE Next:
New
Status in linux package in Ubuntu:
In Progress
Status in linux-oem-5.10 package in Ubuntu:
Invalid
Status in linux source package in Focal:
Fix Committed
Status in linux-oem-5.10 source package in Focal:
Fix Released
Status in linux source package in Groovy:
Fix Committed
Status in linux-oem-5.10 source package in Groovy:
Invalid
Status in linux source package in Hirsute:
Fix Committed
Status in linux-oem-5.10 source package in Hirsute:
Invalid
Status in linux source package in Impish:
In Progress
Status in linux-oem-5.10 source package in Impish:
Invalid
Bug description:
[SRU Justification]
[Impact]
All of 3 different WD19(TB/SC/DC) docks have 3 Type-A ports and 2 Type-C
ports, and there're highspeed Hubs(0bda:5487 and its substream hub 0bda:5413)
and Superspeed Hubs (0bda:0487 and its downstream hub 0bda:0413). In the bug
description below, we will refer the 2 highspeed hubs as Hub A and Hub A.3, and
the 2 superspeed hubs as Hub B and Hub B.3. All devices connected via either
Type-A or Type-C ports will connect to either Hub A.3 or Hub B.3. If we connect
a wakup enabled device (keyboard) to a Type-A port, the Hub A.3 will fail to
activate after exiting s2idle and all downstream devices will not be detected.
If we have a superspeed device connected to other Type-A port in addition to
the keyboard, this superspeed device actually connects to Hub B.3, and the Hub
B.3 will also fails to work after exiting s2idle. If the wakeup enabled device
connects via Type-C port, there's no such problem.
As a summary, a wakeup enabled device connect to Type-A port will
cause the failure of Hub A.3 and Hub B.3. Hub B.3 only fails when a
wakeup enabled device and a superspeed device both connect via Type-A
port.
[Fix]
Before the resume failure, the upstream hub(Hub A or B) will hit the timeout
problem while doing SetPortFeature(PORT_SUSPEND) to the port of the downstream
hub (Hub A.3 or Hub B.3). However, the PORT_SUSPEND bit of the wPortStatus is
actually turned on for the Hub A.3, we simply need to make the kernel believe
it's already suspended. Then the ClearPortFeature will be done during resume
and the problem will go away.
The Hub B.3 will be tricky. The PORT_SUSPEND bit is not on after the
suspend timeout, but it needs the ClearPortFeature(PORT_SUSPEND) for
Hub B.3 to avoid resume failure. It doesn't comply with the USB spec
so it's hard to create a generic fix for it. Because it only happens
when timeout happens on suspending Hub A.3 and there's a superspeed
device connecting to Type-A port, we choose to leave it as-is and try
to address it in the future.
[Test Case]
1. Make sure that the WD19 connects to the laptop
2. Connect USB keyboard/mouse to USB Type-A ports.
3. Suspend the system
4. Press the Enter key or power button to wake up the system
5. Check if the USB keyboard/mouse are still working
Repeat 4 and 5 for > 10 times w/o losing any USB devices.
[Where problems could occur]
A wakeup enabled device (keyboard) connect to Type-A port will cause the
failure of Hub A.3 and Hub B.3 during resume. Hub B.3 only fails when a wakeup
enabled device and a superspeed device both connect via Type-A port. All
devices connects to Hub A.3 (and B.3 if superspeed device connect via Type-A
port) will be lost after resume.
[Regression Potential]
Minimum. The fix is only triggered when timeout happens during USB port
suspend and it follows the standard USB protocol to do either resume or
reset_resume.
========== Original Bug Description ==========
● Summary
Plug in USB mouse and USB keyboard to WD19/WD19DC USB ports near LAN port.
Plug dock into SUT and check USB keyboard and mouse work. SUT enter suspend.
After 1 min resume SUT, check USB keyboard/mouse function. Sometimes USB
keyboard/mouse no function.
Isolation:
1. VP on UMA and Discrete
2. When issue occur, both front and back port on WD19 can't work using USB
keyboard/mouse but USB Key.
● Reproduce Steps
1.Plug in USB mouse and USB keyboard to WD19/WD19DC USB ports near LAN port.
2.Plug dock into SUT and check USB keyboard and mouse work.
3. SUT enter suspend.
4.After 1 min, resume SUT and check USB keyboard/mouse function.
5.Sometimes USB keyboard/mouse no function.
● Results
○ Expected Result
USB mouse or keyboard on dock can use after suspend
○ Actual Result
USB mouse or keyboard on dock sometimes no function after suspend
● Additional Information
○ Test Vault ID：60943.011
○ SKU：Broadmoor Latitude5421
○ BIOS Version：0.3.21
○ Image/Manifest：
dell-bto-focal-fossa-pidgeot-14-X79-20210106-3.iso
dell-bto-focal-fossa-pidgeot-14-X81-20210121-6.iso
○ CPU：TGL ES
○ GPU：Intel pGFX 2020
○ Failure rate：F/R: 2/2 units, 1/10 times
○ WD19 dock, Dock DFU: 1.0.15
---
ProblemType: Bug
ApportVersion: 2.20.11-0ubuntu27.16
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC1: u 2632 F.... pulseaudio
/dev/snd/controlC0: u 2632 F.... pulseaudio
CasperMD5CheckResult: skip
CurrentDesktop: ubuntu:GNOME
DistributionChannelDescriptor:
# This is the distribution channel descriptor for the OEM CDs
# For more information see
http://wiki.ubuntu.com/DistributionChannelDescriptor
canonical-oem-somerville-focal-amd64-20200502-85+fossa-pidgey+X90
DistroRelease: Ubuntu 20.04
InstallationDate: Installed on 2021-04-20 (22 days ago)
InstallationMedia: Ubuntu 20.04 "Focal" - Build amd64 LIVE Binary
20200502-05:58
MachineType: Dell Inc. Precision 5560
Package: linux-oem-5.10
ProcFB: 0 i915drmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.10.0-1023-oem
root=UUID=0a51d1e3-2a97-46b9-87cf-912821ab4aa0 ro quiet splash vt.handoff=7
ProcVersionSignature: Ubuntu 5.10.0-1023.24-oem 5.10.25
RelatedPackageVersions:
linux-restricted-modules-5.10.0-1023-oem N/A
linux-backports-modules-5.10.0-1023-oem N/A
linux-firmware 1.187.10
Tags: focal
Uname: Linux 5.10.0-1023-oem x86_64
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
_MarkForUpload: True
dmi.bios.date: 04/01/2021
dmi.bios.release: 0.4
dmi.bios.vendor: Dell Inc.
dmi.bios.version: 0.4.4
dmi.board.vendor: Dell Inc.
dmi.chassis.asset.tag: 7654321
dmi.chassis.type: 10
dmi.chassis.vendor: Dell Inc.
dmi.modalias:
dmi:bvnDellInc.:bvr0.4.4:bd04/01/2021:br0.4:svnDellInc.:pnPrecision5560:pvr:rvnDellInc.:rn:rvr:cvnDellInc.:ct10:cvr:
dmi.product.family: Precision
dmi.product.name: Precision 5560
dmi.product.sku: 0A62
dmi.sys.vendor: Dell Inc.
To manage notifications about this bug go to:
https://bugs.launchpad.net/hwe-next/+bug/1928242/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
