I have been using rc6 kernel 5.10, plus I git cloned the ath11k-firmware repo, and linking /lib/firmware/ath11k/QCA6390/hw2.0 -> /lib/ath11k- firmware/QCA6390/hw2.0/1.0.1/WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1/
uname -a: Linux minty 5.10.0-051000rc6-generic #202011291930 SMP Mon Nov 30 00:36:46 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux I have had pretty good results with the wifi, except that after sleep resume, i always have to do sudo modprobe -r -f ath11k_pci && sudo modprobe ath11k_pci -- which takes 2 to 3 minutes (last run - 2:34). Otherwise wifi is not working at all. Additionally, on occasion I have observed full system lock ups that require hard reboot (long press on power button). I do not know if this is related. [ +0.000006] usb 1-3.1: USB disconnect, device number 6 [ +0.219827] usb 1-3.2: USB disconnect, device number 5 [ +0.150986] pcieport 0000:00:1c.4: PME: Spurious native interrupt! [ +1.140384] ACPI Error: Thread 2487681024 cannot release Mutex [ECMX] acquired by thread 1375698944 (20200925/exmutex-378) [ +0.000019] No Local Variables are initialized for Method [_Q66] [ +0.000003] No Arguments are initialized for method [_Q66] [ +0.000007] ACPI Error: Aborting method \_SB.PCI0.LPCB.ECDV._Q66 due to previous error (AE_AML_NOT_OWNER) (20200925/psparse-529) [ +0.079962] usb 6-1: USB disconnect, device number 2 [ +1.614174] wlp4s0: deauthenticating from 58:ef:68:0f:2a:3a by local choice (Reason: 3=DEAUTH_LEAVING) [ +0.140469] PM: suspend entry (s2idle) [ +0.009589] Filesystems sync: 0.009 seconds [ +0.002797] Freezing user space processes ... (elapsed 0.060 seconds) done. [ +0.060942] OOM killer disabled. [ +0.000001] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ +0.001721] printk: Suspending console(s) (use no_console_suspend to debug) [Dec19 20:21] ACPI: EC: interrupt blocked [Dec19 20:34] ACPI: EC: interrupt unblocked [ +1.399994] xhci_hcd 0000:a5:00.0: BAR 0: error updating (0x8af00000 != 0x000000) [ +0.189078] nvme nvme0: 16/0/0 default/read/poll queues [ +0.304973] OOM killer enabled. [ +0.000001] Restarting tasks ... [ +0.003223] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [ +0.004528] done. [ +0.063481] PM: suspend exit [ +3.018443] ath11k_pci 0000:04:00.0: wmi command 16387 timeout [ +0.000027] ath11k_pci 0000:04:00.0: failed to send WMI_PDEV_SET_PARAM cmd [ +0.000006] ath11k_pci 0000:04:00.0: failed to enable dynamic bw: -11 [ +3.071691] ath11k_pci 0000:04:00.0: wmi command 16387 timeout [ +0.000003] ath11k_pci 0000:04:00.0: failed to send WMI_PDEV_SET_PARAM cmd [ +0.000003] ath11k_pci 0000:04:00.0: failed to enable PMF QOS: (-11 [ +3.071750] ath11k_pci 0000:04:00.0: wmi command 16387 timeout [ +0.000005] ath11k_pci 0000:04:00.0: failed to send WMI_PDEV_SET_PARAM cmd [ +0.000005] ath11k_pci 0000:04:00.0: failed to enable PMF QOS: (-11 [ +13.566946] ath11k_pci 0000:04:00.0: wmi command 16387 timeout [ +0.000007] ath11k_pci 0000:04:00.0: failed to send WMI_PDEV_SET_PARAM cmd [ +0.000006] ath11k_pci 0000:04:00.0: failed to enable PMF QOS: (-11 [ +0.144494] failed to send QMI message [ +0.000007] ath11k_pci 0000:04:00.0: qmi failed to send mode request, mode: 4, err = -5 [ +0.000001] ath11k_pci 0000:04:00.0: qmi failed to send wlan mode off [Dec19 20:37] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ +0.000191] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ +0.017076] ath11k_pci 0000:04:00.0: WARNING: ath11k PCI support is experimental! [ +0.000153] ath11k_pci 0000:04:00.0: BAR 0: assigned [mem 0xd2100000-0xd21fffff 64bit] [ +0.070957] mhi 0000:04:00.0: Requested to power ON [ +0.000207] mhi 0000:04:00.0: Power on setup success [ +0.414557] ath11k_pci 0000:04:00.0: Respond mem req failed, result: 1, err: 0 [ +0.000006] ath11k_pci 0000:04:00.0: qmi failed to respond fw mem req:-22 [ +0.010392] ath11k_pci 0000:04:00.0: chip_id 0x0 chip_family 0xb board_id 0xff soc_id 0xffffffff [ +0.000005] ath11k_pci 0000:04:00.0: fw_version 0x101c06cc fw_build_timestamp 2020-06-24 19:50 fw_build_id [ +0.204570] ath11k_pci 0000:04:00.0 wlp4s0: renamed from wlan0 [Dec19 20:38] wlp4s0: authenticate with 58:ef:68:0f:2a:3a [ +0.149049] wlp4s0: send auth to 58:ef:68:0f:2a:3a (try 1/3) [ +0.005101] wlp4s0: authenticated [ +0.000015] ath11k_pci 0000:04:00.0 wlp4s0: disabling HT/VHT/HE due to WEP/TKIP use [ +0.007783] wlp4s0: associate with 58:ef:68:0f:2a:3a (try 1/3) [ +0.019239] wlp4s0: RX AssocResp from 58:ef:68:0f:2a:3a (capab=0x11 status=0 aid=3) [ +0.015076] wlp4s0: associated [ +0.007314] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [Dec19 20:39] perf: interrupt took too long (4034 > 4022), lowering kernel.perf_event_max_sample_rate to 49500 -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-firmware in Ubuntu. https://bugs.launchpad.net/bugs/1879633 Title: Killer 500s (QCA6390) WLAN/BT [17cb:1101] unavailable Status in HWE Next: New Status in linux package in Ubuntu: In Progress Status in linux-firmware package in Ubuntu: Invalid Status in linux-oem-5.10 package in Ubuntu: Invalid Status in linux-oem-5.6 package in Ubuntu: Invalid Status in linux source package in Focal: Won't Fix Status in linux-firmware source package in Focal: Fix Committed Status in linux-oem-5.10 source package in Focal: Fix Committed Status in linux-oem-5.6 source package in Focal: Triaged Status in linux source package in Groovy: Triaged Status in linux-firmware source package in Groovy: In Progress Status in linux-oem-5.10 source package in Groovy: Invalid Status in linux-oem-5.6 source package in Groovy: Invalid Bug description: [SRU Justification] [Impact] Qualcomm QCA6390 series not recognized due to the lack of ath11k driver. $ lspci 0000:55:00.0 Unassigned class [ff00]: Qualcomm Device [17cb:1101] Subsystem: Bigfoot Networks, Inc. Device [1a56:a501] [Fix] 25 additional fixes in ath tree (https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git), tag ath11k-qca6390-bringup-202011301608 to resolve issues on TGL platforms, and firmware updates from mainline are required. [Test Case] 1. Install firmwares & boot from patched kernel, 2. ath11k should be now up and running. Check with `sudo dmesg | grep ath11k` [Where problems could occur] There has been a lot patches landed in kernel since 5.7 devel cycle. The last bits here has merge base with mainline at v5.10-rc4, and since then only patches for ath11k itself has been committed. ========== Original Bug Description ========== Qualcomm QCA6390 series not recognized due to the lack of ath11k driver. 0000:55:00.0 Unassigned class [ff00]: Qualcomm Device [17cb:1101] Subsystem: Bigfoot Networks, Inc. Device [1a56:a501] Depending on bug 1891632 to fix Wi-Fi dead after resumed from suspend. --- ProblemType: Bug ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 AudioDevicesInUse: USER PID ACCESS COMMAND /dev/snd/controlC0: u 1842 F.... pulseaudio CasperMD5CheckResult: skip DistributionChannelDescriptor: # This is the distribution channel descriptor for the OEM CDs # For more information see http://wiki.ubuntu.com/DistributionChannelDescriptor canonical-oem-somerville-focal-amd64-20200502-85+fossa-bulbasaur+X23 DistroRelease: Ubuntu 20.04 InstallationDate: Installed on 2020-06-04 (0 days ago) InstallationMedia: Ubuntu 20.04 "Focal" - Build amd64 LIVE Binary 20200502-05:58 IwConfig: lo no wireless extensions. enx00e04c6801fa no wireless extensions. MachineType: Dell Inc. XPS 13 9310 Package: linux (not installed) ProcEnviron: TERM=xterm-256color PATH=(custom, no user) LANG=en_US.UTF-8 SHELL=/bin/bash ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.6.0-1010-oem root=UUID=580a1e2b-9a42-4f3b-b20f-ddbed7b572f5 ro ProcVersionSignature: Ubuntu 5.6.0-1010.10-oem 5.6.8 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-5.6.0-1010-oem N/A linux-backports-modules-5.6.0-1010-oem N/A linux-firmware 1.187+lp1867862.1 RfKill: Tags: focal Uname: Linux 5.6.0-1010-oem x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: _MarkForUpload: True dmi.bios.date: 05/14/2020 dmi.bios.vendor: Dell Inc. dmi.bios.version: 0.1.9 dmi.board.vendor: Dell Inc. dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr0.1.9:bd05/14/2020:svnDellInc.:pnXPS139310:pvr:rvnDellInc.:rn:rvr:cvnDellInc.:ct10:cvr: dmi.product.family: XPS dmi.product.name: XPS 13 9310 dmi.product.sku: 0991 dmi.sys.vendor: Dell Inc. To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1879633/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
