May be fixed by upstream commits: 7b7d897e8898 2020-07-24 12:34:42 +0200 N shirley her mmc: sdhci-pci-o2micro: Add HW tuning for SDR104 mode cdd2b769789a 2020-07-24 12:30:36 +0200 N shirley her mmc: sdhci-pci-o2micro: Bug fix for O2 host controller Seabird1
-- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1901401 Title: SD card does not work on linux, but window (O2Micro) Status in linux package in Ubuntu: Confirmed Bug description: I try to use a micro SD card (256GB, connected via microSD-to-SD adapter) on my laptop. I could not ... - ...mount my (micro) SD card - ...format with gparted - ...format with "disks" disks error: --------------- Error wiping device: failed to probe the device "/dev/mmcblk0" (udisks error-quark,0) gparted error: --------------- "Input/output error during read on /dev/mmcblk0" `lspci -nn` shows: ------------------- SD Host controller [0805]: O2 Micro, Inc. SD/MMC Card Reader Controller [1217:8520] (rev 01) Output of `journalctl -f` when inserting ----------------------------------------- 10月 25 20:21:08 myuser kernel: mmc0: new ultra high speed SDR104 SDXC card at address 59b4 10月 25 20:21:08 myuser kernel: mmcblk0: mmc0:59b4 EE4S5 239 GiB 10月 25 20:21:08 myuser kernel: blk_update_request: I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 10月 25 20:21:08 myuser kernel: Buffer I/O error on dev mmcblk0, logical block 0, async page read 10月 25 20:21:09 myuser kernel: blk_update_request: I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 10月 25 20:21:09 myuser kernel: Buffer I/O error on dev mmcblk0, logical block 0, async page read 10月 25 20:21:09 myuser kernel: blk_update_request: I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 10月 25 20:21:09 myuser kernel: Buffer I/O error on dev mmcblk0, logical block 0, async page read 10月 25 20:21:09 myuser kernel: ldm_validate_partition_table(): Disk read failed. 10月 25 20:21:09 myuser kernel: blk_update_request: I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 10月 25 20:21:09 myuser kernel: Buffer I/O error on dev mmcblk0, logical block 0, async page read 10月 25 20:21:10 myuser kernel: blk_update_request: I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 10月 25 20:21:10 myuser kernel: Buffer I/O error on dev mmcblk0, logical block 0, async page read 10月 25 20:21:10 myuser kernel: blk_update_request: I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 10月 25 20:21:10 myuser kernel: Buffer I/O error on dev mmcblk0, logical block 0, async page read 10月 25 20:21:10 myuser kernel: blk_update_request: I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 10月 25 20:21:10 myuser kernel: Buffer I/O error on dev mmcblk0, logical block 0, async page read 10月 25 20:21:10 myuser kernel: Dev mmcblk0: unable to read RDB block 0 10月 25 20:21:11 myuser kernel: blk_update_request: I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 10月 25 20:21:11 myuser kernel: Buffer I/O error on dev mmcblk0, logical block 0, async page read 10月 25 20:21:11 myuser kernel: blk_update_request: I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 10月 25 20:21:11 myuser kernel: Buffer I/O error on dev mmcblk0, logical block 0, async page read 10月 25 20:21:11 myuser kernel: blk_update_request: I/O error, dev mmcblk0, sector 24 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 10月 25 20:21:11 myuser kernel: Buffer I/O error on dev mmcblk0, logical block 3, async page read 10月 25 20:21:12 myuser kernel: mmcblk0: unable to read partition table 10月 25 20:21:13 myuser fwupd[19538]: 11:21:13:0166 FuEngine failed to add udev device /sys/devices/pci0000:00/0000:00:1d.0/0000:03:00.0/mmc_host/mmc0/mmc0:59b4/block/mmcblk0: failed get ffu_capable for (null) I tried: --------- - Another micoSD-SD adapter: No change - Rebooting: No change I can do: ----------- - Use the card under Win 10: Same reader, same adapter, same card - Use other SD/microSD cards with the same reader under Linux lsb_release -rd ------------------ Description: Ubuntu 20.04 Release: 20.04 and Description: Ubuntu 20.10 Release: 20.10 digging in `journalctl -b 0` ------------------------------- xhci_hcd 0000:00:14.0: xHCI Host Controller xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.08 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: xHCI Host Controller usb usb2: Manufacturer: Linux 5.8.0-25-generic xhci-hcd usb usb2: SerialNumber: 0000:00:14.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected sdhci-pci 0000:03:00.0: SDHCI controller found [1217:8520] (rev 1) mmc0: SDHCI controller on PCI [0000:03:00.0] using ADMA i2c i2c-1: 2/2 memory slots populated (from DMI) intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) idma64 idma64.2: Found Intel integrated DMA 64-bit e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) a0:66:10:00:ae:e0 e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection mmc0: new ultra high speed SDR104 SDXC card at address 59b4 e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0 mmcblk0: mmc0:59b4 EE4S5 239 GiB sdhci-pci 0000:03:00.0: error -84 requesting status sdhci-pci 0000:03:00.0: error -84 requesting status mmcblk0: recovery failed! print_req_error: 6 callbacks suppressed blk_update_request: I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 buffer_io_error: 4 callbacks suppressed Buffer I/O error on dev mmcblk0, logical block 0, async page read sdhci-pci 0000:03:00.0: error -84 requesting status digging in dmesg: ------------------- ( I tried to find the earliest entries in dmesg) [ 5.981553] sdhci-pci 0000:03:00.0: error -84 requesting status [ 5.982870] mmcblk0: recovery failed! [ 6.098751] sdhci-pci 0000:03:00.0: error -84 requesting status [ 6.100138] mmcblk0: recovery failed! [ 57.379419] mmcblk0: mmc0:59b4 EE4S5 239 GiB [ 57.443304] sdhci-pci 0000:03:00.0: error -84 requesting status [ 57.751837] sdhci-pci 0000:03:00.0: error -84 requesting status [ 57.751842] mmcblk0: recovery failed! [ 57.751853] print_req_error: 6 callbacks suppressed [ 57.751856] blk_update_request: I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 57.751859] buffer_io_error: 4 callbacks suppressed [ 57.751860] Buffer I/O error on dev mmcblk0, logical block 0, async page read [ 57.865376] sdhci-pci 0000:03:00.0: error -84 requesting status [ 57.865380] mmcblk0: recovery failed! .... [ 57.978968] ldm_validate_partition_table(): Disk read failed. ... [ 239.175416] print_req_error: 4 callbacks suppressed [ 239.175426] blk_update_request: I/O error, dev mmcblk0, sector 500694912 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 0 [ 239.295409] sdhci-pci 0000:03:00.0: error -84 requesting status [ 239.295424] mmcblk0: recovery failed! [ 239.295469] blk_update_request: I/O error, dev mmcblk0, sector 500694912 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 239.295482] buffer_io_error: 3 callbacks suppressed [ 239.295488] Buffer I/O error on dev mmcblk0, logical block 62586864, async page read [ 239.511759] sdhci-pci 0000:03:00.0: error -84 requesting status [ 239.511774] mmcblk0: recovery failed! ProblemType: Bug DistroRelease: Ubuntu 20.10 Package: linux-image-5.8.0-25-generic 5.8.0-25.26 ProcVersionSignature: Ubuntu 5.8.0-25.26-generic 5.8.14 Uname: Linux 5.8.0-25-generic x86_64 ApportVersion: 2.20.11-0ubuntu50 Architecture: amd64 AudioDevicesInUse: USER PID ACCESS COMMAND /dev/snd/controlC0: nimono 1542 F.... pulseaudio /dev/snd/pcmC0D3p: nimono 1542 F...m pulseaudio CasperMD5CheckResult: skip CurrentDesktop: XFCE Date: Sun Oct 25 20:30:03 2020 HotplugNewDevices: HotplugNewMounts: MachineType: FUJITSU FMVWB3U27 ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.8.0-25-generic root=UUID=fe637d00-125b-4a54-adce-3711830d450b ro acpi_osi=! "acpi_osi=Windows 2015" resume=UUID=8fa6d40f-c23d-497e-9846-f6f26536690d RelatedPackageVersions: linux-restricted-modules-5.8.0-25-generic N/A linux-backports-modules-5.8.0-25-generic N/A linux-firmware 1.190 RfKill: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no SourcePackage: linux Symptom: storage UpgradeStatus: Upgraded to groovy on 2020-10-24 (1 days ago) dmi.bios.date: 01/23/2018 dmi.bios.release: 1.7 dmi.bios.vendor: FUJITSU // Insyde Software Corp. dmi.bios.version: Version 1.07 dmi.board.name: FJNB2BB dmi.board.vendor: FUJITSU dmi.board.version: A2 dmi.chassis.type: 10 dmi.chassis.vendor: FUJITSU dmi.modalias: dmi:bvnFUJITSU//InsydeSoftwareCorp.:bvrVersion1.07:bd01/23/2018:br1.7:svnFUJITSU:pnFMVWB3U27:pvr:rvnFUJITSU:rnFJNB2BB:rvrA2:cvnFUJITSU:ct10:cvr: dmi.product.family: LIFEBOOK-JR dmi.product.name: FMVWB3U27 dmi.sys.vendor: FUJITSU To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1901401/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
