** Changed in: linux-oem-5.6 (Ubuntu Focal)
Status: In Progress => Fix Committed
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-oem-5.6 in Ubuntu.
https://bugs.launchpad.net/bugs/1894778
Title:
Cannot probe sata disk on sata controller behind VMD: ata1.00: failed
to IDENTIFY (I/O error, err_mask=0x4)
Status in HWE Next:
New
Status in linux package in Ubuntu:
In Progress
Status in linux-oem-5.6 package in Ubuntu:
Invalid
Status in linux source package in Focal:
In Progress
Status in linux-oem-5.6 source package in Focal:
Fix Committed
Status in linux source package in Groovy:
In Progress
Status in linux-oem-5.6 source package in Groovy:
Invalid
Bug description:
[SRU Justification]
[Impact]
When booting with a certain platforms with boot disk attached to SATA
bus behind Intel VMD controller, disk probing may fail with following
error messages left in dmesg:
[ 6.163286] ata1.00: qc timeout (cmd 0xec)
[ 6.165630] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[Fix]
Proposed kernel patch https://patchwork.kernel.org/patch/11758345/
[Test Case]
Check dmesg/lsblk for disk probe.
For pci MSI address, check lspci output:
$ lspci -vvnn
....
Capabilities: [80] MSI: Enable+ Count=1/1 maskable- 64bit-
Address: fee00000 Data: 0000
When it fails, the address is fee00000. And with a patched kernel:
$ lspci -vvnn
....
Capabilities: [80] MSI: Enable+ Count=1/1 maskable- 64bit-
Address: fee01000 Data: 0000
[Regression Potential]
Low. For previous NVMe based platforms, this patch brings no effective
change for NVMe devices because they will still stay in fast-interrupt
list.
========== Original Bug Description ==========
When booting with root filesystem on sata disks under Intel VMD mode,
following errors printed in dmesg and no disk is found, nor booting
into it:
[ 6.163286] ata1.00: qc timeout (cmd 0xec)
[ 6.165630] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 6.483649] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 16.659284] ata1.00: qc timeout (cmd 0xec)
[ 16.661717] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 16.663161] ata1: limiting SATA link speed to 1.5 Gbps
[ 16.983890] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 48.147294] ata1.00: qc timeout (cmd 0xec)
[ 48.149737] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 48.467889] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
$ lspci
...
10000:e0:17.0 SATA controller: Intel Corporation Device a0d3 (rev 20)
To manage notifications about this bug go to:
https://bugs.launchpad.net/hwe-next/+bug/1894778/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
