Have the same issue with HP envy x360 running KDE and Ubuntu 20.04.1 LTS

uname -a

Linux rix360 5.4.0-42-generic #46-Ubuntu SMP Fri Jul 10 00:24:02 UTC
2020 x86_64 x86_64 x86_64 GNU/Linux


First entry in /proc/cpuinfo shows 

processor       : 0
vendor_id       : AuthenticAMD
cpu family      : 23
model           : 96
model name      : AMD Ryzen 7 4700U with Radeon Graphics
stepping        : 1
microcode       : 0x8600103
cpu MHz         : 1395.962
cache size      : 512 KB
physical id     : 0
siblings        : 8
core id         : 0
cpu cores       : 8
apicid          : 0
initial apicid  : 0
fpu             : yes
fpu_exception   : yes
cpuid level     : 16
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov 
pat pse36 clflush mmx fxsr 
sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good 
nopl nonstop_tsc cpuid extd_
apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 movbe 
popcnt aes xsave avx f16c rdrand
 lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch 
osvw ibs skinit wdt tce topo
ext perfctr_core perfctr_nb bpext perfctr_llc mwaitx cpb cat_l3 cdp_l3 
hw_pstate ssbd mba ibrs ibpb stibp v
mmcall fsgsbase bmi1 avx2 smep bmi2 cqm rdt_a rdseed adx smap clflushopt clwb 
sha_ni xsaveopt xsavec xgetbv
1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local clzero irperf 
xsaveerptr wbnoinvd arat npt lbrv 
svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter 
pfthreshold avic v_vmsave_vml
oad vgif umip rdpid overflow_recov succor smca
bugs            : sysret_ss_attrs spectre_v1 spectre_v2 spec_store_bypass
bogomips        : 3992.69
TLB size        : 3072 4K pages
clflush size    : 64
cache_alignment : 64
address sizes   : 48 bits physical, 48 bits virtual
power management: ts ttp tm hwpstate cpb eff_freq_ro [13] [14]

-----------------------------

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1881494

Title:
  [amdgpu] suspend to ram (standby) crashes amdgpu (Ryzen-7 Vega - HP
  Envy x360)

Status in linux package in Ubuntu:
  Confirmed

Bug description:
  suspend to ram crashes amdgpu.
  System is still accessible via SSH after resume from standby.
  Happens when X is running (gdm/gnome with 3d acceleration) and also when X is 
stopped.

  Also the computer never really goes into standby. The cpu fan is
  running all the time and the power button is fully lighted up.
  Nevertheless, I need to press CTRL to "wake" it, so I can access it
  via SSH.

  I'll attach the dmesg output of several attempts.
  This is the hardware:
  
https://store.hp.com/GermanyStore/Merch/Product.aspx?id=9YN58EA&opt=ABD&sel=NTB
  Tested EFI and BIOS bootmode.

  Please let me know if I can help tracking this down.
  I'm a software developer (sadly not a kernel developer), so you can ask dirty 
technical questions ;-)

  Workaround:
  Enable hibernation (suspend to disk) and use instead of suspend to ram 
(standby).

  What didn't help:
  Kernel parameters: no_console_suspend nomodeset amdgpu.gpu_recovery=1 
init_on_free=0 idle=nowait amd_iommu=flush
  echo mem > /sys/power/state
  systemctl start suspend.target
  echo 0 > /sys/power/pm_async
  Upgrading kernel from 5.4 to: 5.6.0-1010-oem

  Using the kernel parameters
    no_console_suspend nomodeset amdgpu.gpu_recovery=1 init_on_free=0
    idle=nowait amd_iommu=flush
  and doing
    echo mem > /sys/power/state
  before suspend made the system acutally not crash.
  Nevertheless, the cpu fan and the power button stay full on/lighted. So the 
system doesn't really go to standby either.

  I'll try to find the minimal combination of kernel parameters.
  nomodeset seems to be essential, but not sufficient.
  Without nomodeset the system wakes again for a few seconds, but freezes a 
moment later (ssh still accessible).

  ProblemType: Bug
  DistroRelease: Ubuntu 20.04
  Package: xorg 1:7.7+19ubuntu14
  ProcVersionSignature: Ubuntu 5.6.0-1010.10-oem 5.6.8
  Uname: Linux 5.6.0-1010-oem x86_64
  ApportVersion: 2.20.11-0ubuntu27.2
  Architecture: amd64
  BootLog: Error: [Errno 13] Keine Berechtigung: '/var/log/boot.log'
  CasperMD5CheckResult: skip
  CompositorRunning: None
  CurrentDesktop: ubuntu:GNOME
  Date: Sun May 31 18:43:54 2020
  DistUpgraded: Fresh install
  DistroCodename: focal
  DistroVariant: ubuntu
  ExtraDebuggingInterest: Yes, including running git bisection searches
  GpuHangFrequency: Continuously
  GpuHangReproducibility: Yes, I can easily reproduce it
  GpuHangStarted: Immediately after installing this version of Ubuntu
  GraphicsCard:
   Advanced Micro Devices, Inc. [AMD/ATI] Picasso [1002:15d8] (rev c1) (prog-if 
00 [VGA controller])
     Subsystem: Hewlett-Packard Company Picasso [103c:85de]
  InstallationDate: Installed on 2020-05-29 (1 days ago)
  InstallationMedia: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423)
  MachineType: HP HP ENVY x360 Convertible 13-ar0xxx
  ProcEnviron:
   TERM=xterm-256color
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=<set>
   LANG=de_DE.UTF-8
   SHELL=/bin/bash
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-5.6.0-1010-oem 
root=/dev/mapper/vgubuntu-root ro quiet splash vt.handoff=7
  SourcePackage: xorg
  Symptom: display
  Title: Xorg freeze
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 12/26/2019
  dmi.bios.vendor: AMI
  dmi.bios.version: F.19
  dmi.board.asset.tag: Base Board Asset Tag
  dmi.board.name: 85DE
  dmi.board.vendor: HP
  dmi.board.version: 41.36
  dmi.chassis.type: 31
  dmi.chassis.vendor: HP
  dmi.chassis.version: Chassis Version
  dmi.modalias: 
dmi:bvnAMI:bvrF.19:bd12/26/2019:svnHP:pnHPENVYx360Convertible13-ar0xxx:pvr:rvnHP:rn85DE:rvr41.36:cvnHP:ct31:cvrChassisVersion:
  dmi.product.family: 103C_5335KV HP Envy
  dmi.product.name: HP ENVY x360 Convertible 13-ar0xxx
  dmi.product.sku: 9YN58EA#ABD
  dmi.sys.vendor: HP
  version.compiz: compiz N/A
  version.libdrm2: libdrm2 2.4.101-2
  version.libgl1-mesa-dri: libgl1-mesa-dri 20.0.4-2ubuntu1
  version.libgl1-mesa-glx: libgl1-mesa-glx N/A
  version.xserver-xorg-core: xserver-xorg-core 2:1.20.8-2ubuntu2
  version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A
  version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-1
  version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.917+git20200226-1
  version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.16-1

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1881494/+subscriptions

-- 
Mailing list: https://launchpad.net/~kernel-packages
Post to     : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help   : https://help.launchpad.net/ListHelp

Reply via email to