Public bug reported:
Booting 20.04 armhf preinstalled-server on Pi3b+ with vc4-kms-v3d
selected [1] causes boot failure with [2] output on UART. Further system
info in [3]
Side note: Booting with the same usercfg.txt but with the 18.04 vc4-kms-
v3d.dtbo file "works": the boot is normal without the errors shown in
[2].
[1]
ubuntu@ubuntu:~$ cat /boot/firmware/usercfg.txt
# Place "config.txt" changes (dtparam, dtoverlay, disable_overscan, etc.) in
# this file. Please refer to the README file for a description of the various
# configuration files on the boot partition.
dtoverlay=vc4-kms-v3d
[2]
Starting kernel ...
[ 0.039873] cma: CMA area linux,cma could not be activated
[ 0.043189] DMA: failed to allocate 1024 KiB pool for atomic coherent
allocation
[ 0.308022] kobject_add_internal failed for 3e513000.framebuffer with
-EEXIST, don't try to register things with the s.
[ 1.141370] kvm [1]: Error, CPU 0 not supported!
[ 1.235565] raspberrypi-exp-gpio soc:firmware:expgpio: Failed to get
GPIO 0 config (-12 80)
[ 1.236723] raspberrypi-exp-gpio soc:firmware:expgpio: Failed to get
GPIO 1 config (-12 81)
[ 1.237882] raspberrypi-exp-gpio soc:firmware:expgpio: Failed to get
GPIO 2 config (-12 82)
[ 1.239014] raspberrypi-exp-gpio soc:firmware:expgpio: Failed to get
GPIO 3 config (-12 83)
[ 1.240139] raspberrypi-exp-gpio soc:firmware:expgpio: Failed to get
GPIO 4 config (-12 84)
[ 1.241263] raspberrypi-exp-gpio soc:firmware:expgpio: Failed to get
GPIO 5 config (-12 85)
[ 1.242412] raspberrypi-exp-gpio soc:firmware:expgpio: Failed to get
GPIO 6 config (-12 86)
[ 1.243526] raspberrypi-exp-gpio soc:firmware:expgpio: Failed to get
GPIO 7 config (-12 87)
[ 1.831440] spi-bcm2835 3f204000.spi: could not get clk: -517
[ 1.849256] raspberrypi-exp-gpio soc:firmware:expgpio: Failed to get
GPIO 2 config (-12 82)
[ 1.850523] raspberrypi-exp-gpio soc:firmware:expgpio: Failed to get
GPIO 2 config (-12 82)
[ 1.852205] bcm2835_vchiq 3f00b840.mailbox: could not allocate DMA memory
[ 2.369653] spi-bcm2835 3f204000.spi: cannot prepare fill_tx_desc -
not using DMA mode
[ 2.412710] sdhost: failed to allocate log buf
ext4
[3]
ubuntu@ubuntu:~$ lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 20.04.1 LTS
Release: 20.04
Codename: focal
ubuntu@ubuntu:~$ uname -a
Linux ubuntu 5.4.0-1015-raspi #15-Ubuntu SMP Fri Jul 10 05:37:25 UTC 2020
armv7l armv7l armv7l GNU/Linux
Initial part of lshw:
ubuntu
description: ARMv7 Processor rev 4 (v7l)
product: Raspberry Pi 3 Model B Plus Rev 1.3
serial: 0000000092021ecd
width: 32 bits
capabilities: smp
** Affects: linux-raspi (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-raspi in Ubuntu.
https://bugs.launchpad.net/bugs/1889223
Title:
vc4-kms-v3d boot failure focal armhf preinstalled server
Status in linux-raspi package in Ubuntu:
New
Bug description:
Booting 20.04 armhf preinstalled-server on Pi3b+ with vc4-kms-v3d
selected [1] causes boot failure with [2] output on UART. Further
system info in [3]
Side note: Booting with the same usercfg.txt but with the 18.04 vc4
-kms-v3d.dtbo file "works": the boot is normal without the errors
shown in [2].
[1]
ubuntu@ubuntu:~$ cat /boot/firmware/usercfg.txt
# Place "config.txt" changes (dtparam, dtoverlay, disable_overscan, etc.) in
# this file. Please refer to the README file for a description of the various
# configuration files on the boot partition.
dtoverlay=vc4-kms-v3d
[2]
Starting kernel ...
[ 0.039873] cma: CMA area linux,cma could not be activated
[ 0.043189] DMA: failed to allocate 1024 KiB pool for atomic coherent
allocation
[ 0.308022] kobject_add_internal failed for 3e513000.framebuffer with
-EEXIST, don't try to register things with the s.
[ 1.141370] kvm [1]: Error, CPU 0 not supported!
[ 1.235565] raspberrypi-exp-gpio soc:firmware:expgpio: Failed to get
GPIO 0 config (-12 80)
[ 1.236723] raspberrypi-exp-gpio soc:firmware:expgpio: Failed to get
GPIO 1 config (-12 81)
[ 1.237882] raspberrypi-exp-gpio soc:firmware:expgpio: Failed to get
GPIO 2 config (-12 82)
[ 1.239014] raspberrypi-exp-gpio soc:firmware:expgpio: Failed to get
GPIO 3 config (-12 83)
[ 1.240139] raspberrypi-exp-gpio soc:firmware:expgpio: Failed to get
GPIO 4 config (-12 84)
[ 1.241263] raspberrypi-exp-gpio soc:firmware:expgpio: Failed to get
GPIO 5 config (-12 85)
[ 1.242412] raspberrypi-exp-gpio soc:firmware:expgpio: Failed to get
GPIO 6 config (-12 86)
[ 1.243526] raspberrypi-exp-gpio soc:firmware:expgpio: Failed to get
GPIO 7 config (-12 87)
[ 1.831440] spi-bcm2835 3f204000.spi: could not get clk: -517
[ 1.849256] raspberrypi-exp-gpio soc:firmware:expgpio: Failed to get
GPIO 2 config (-12 82)
[ 1.850523] raspberrypi-exp-gpio soc:firmware:expgpio: Failed to get
GPIO 2 config (-12 82)
[ 1.852205] bcm2835_vchiq 3f00b840.mailbox: could not allocate DMA memory
[ 2.369653] spi-bcm2835 3f204000.spi: cannot prepare fill_tx_desc -
not using DMA mode
[ 2.412710] sdhost: failed to allocate log buf
ext4
[3]
ubuntu@ubuntu:~$ lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 20.04.1 LTS
Release: 20.04
Codename: focal
ubuntu@ubuntu:~$ uname -a
Linux ubuntu 5.4.0-1015-raspi #15-Ubuntu SMP Fri Jul 10 05:37:25 UTC 2020
armv7l armv7l armv7l GNU/Linux
Initial part of lshw:
ubuntu
description: ARMv7 Processor rev 4 (v7l)
product: Raspberry Pi 3 Model B Plus Rev 1.3
serial: 0000000092021ecd
width: 32 bits
capabilities: smp
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux-raspi/+bug/1889223/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
