I did the test on the rpi3B+ board, scp a 3.3G size file from host
machine to the rpi3B+ board (mmc card), there is no any errors, and
there is no calltrace in the dmesg of the rpi3B+ board.
log on the host machine:
hwang4@hwang4-Vostro-5390:~/Downloads$ scp
dell-bto-bionic-beaver-osp1-shireen-X44-20200103-22.iso
ubuntu@192.168.2.103:~/test/
The authenticity of host '192.168.2.103 (192.168.2.103)' can't be established.
ECDSA key fingerprint is SHA256:HbfQtMzTnE9Bl6sg20Y95s6Ruf21ybTJ6T7npMl0Ex4.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.2.103' (ECDSA) to the list of known hosts.
ubuntu@192.168.2.103's password:
dell-bto-bionic-beaver-osp1-shireen-X44-20200103-22.iso
100% 3389MB 641.5KB/s 1:30:09
log on the rpi3B+ board:
ubuntu@ubuntu:~/test$ uname -a
Linux ubuntu 5.3.0-1017-raspi2 #19+otg SMP Wed Jan 29 12:45:11 CST 2020 aarch64
aarch64 aarch64 GNU/Linux
ubuntu@ubuntu:~/test$ ls -la
total 3470028
drwxrwxr-x 2 ubuntu ubuntu 4096 Feb 7 11:53 .
drwxr-xr-x 7 ubuntu ubuntu 4096 Feb 7 11:51 ..
-rw-rw-r-- 1 ubuntu ubuntu 3553296384 Feb 7 13:23
dell-bto-bionic-beaver-osp1-shireen-X44-20200103-22.iso
dmesg:
....
[ 22.099395] audit: type=1400 audit(1581076194.463:10): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="lsb_release" pid=1132
comm="apparmor_parser"
[ 22.114632] audit: type=1400 audit(1581076194.479:11): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1131
comm="apparmor_parser"
[ 27.603378] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 112.486200] kauditd_printk_skb: 18 callbacks suppressed
[ 112.486207] audit: type=1400 audit(1581076328.080:30): apparmor="STATUS"
operation="profile_replace" profile="unconfined" name="snap.lxd.activate"
pid=1678 comm="apparmor_parser"
[ 112.507068] audit: type=1400 audit(1581076328.104:31): apparmor="STATUS"
operation="profile_replace" profile="unconfined" name="snap.lxd.buginfo"
pid=1680 comm="apparmor_parser"
[ 112.543622] audit: type=1400 audit(1581076328.140:32): apparmor="STATUS"
operation="profile_replace" profile="unconfined" name="snap.lxd.benchmark"
pid=1679 comm="apparmor_parser"
[ 112.684646] audit: type=1400 audit(1581076328.280:33): apparmor="STATUS"
operation="profile_replace" profile="unconfined" name="snap.lxd.check-kernel"
pid=1681 comm="apparmor_parser"
[ 113.298782] audit: type=1400 audit(1581076328.896:34): apparmor="STATUS"
operation="profile_replace" profile="unconfined" name="snap.lxd.hook.install"
pid=1684 comm="apparmor_parser"
[ 113.474537] audit: type=1400 audit(1581076329.072:35): apparmor="STATUS"
operation="profile_replace" profile="unconfined" name="snap.lxd.lxc" pid=1685
comm="apparmor_parser"
[ 113.522045] audit: type=1400 audit(1581076329.116:36): apparmor="STATUS"
operation="profile_replace" profile="unconfined" name="snap.lxd.hook.configure"
pid=1683 comm="apparmor_parser"
[ 113.551776] audit: type=1400 audit(1581076329.148:37): apparmor="STATUS"
operation="profile_replace" profile="unconfined" name="snap.lxd.daemon"
pid=1682 comm="apparmor_parser"
[ 113.962890] audit: type=1400 audit(1581076329.560:38): apparmor="STATUS"
operation="profile_replace" profile="unconfined" name="snap.lxd.lxd" pid=1686
comm="apparmor_parser"
[ 114.104891] audit: type=1400 audit(1581076329.700:39): apparmor="STATUS"
operation="profile_replace" profile="unconfined" name="snap.lxd.migrate"
pid=1687 comm="apparmor_parser"
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-raspi2 in Ubuntu.
https://bugs.launchpad.net/bugs/1861936
Title:
Raspberry Pi 3 network dies shortly after a burst of SD card IO and
network load ((lan78xx): transmit queue 0 timed out)
Status in linux-raspi2 package in Ubuntu:
Incomplete
Bug description:
Raspberry Pi 3 network dies shortly after a burst of SD card IO (writes) and
network load. Happened a few times (every time) when I tried to download a
gparted zip release (~350 MiB) directly to the SD card, and then finally when I
tried to scp the finished download from a desktop onto RPi's card.
Didn't collect information when it happened, but kept a copy of kern.log.
Here's the relevant part:
Feb 4 23:42:59 rpi3 kernel: [ 571.878359] ------------[ cut here
]------------
Feb 4 23:42:59 rpi3 kernel: [ 571.878420] NETDEV WATCHDOG: eth0 (lan78xx):
transmit queue 0 timed out
Feb 4 23:42:59 rpi3 kernel: [ 571.878550] WARNING: CPU: 3 PID: 0 at
net/sched/sch_generic.c:447 dev_watchdog+0x324/0x330
Feb 4 23:42:59 rpi3 kernel: [ 571.878557] Modules linked in: sit tunnel4
ip_tunnel bridge stp llc ip6table_filter ip6_tables xt_tcpudp xt_conntrack
nf_conntrack iptable_filter bpfilter nls_ascii dm_multipath scsi_dh_rdac
scsi_dh_emc scsi_dh_alua btsdio bluetooth ecdh_generic ecc brcmfmac brcmutil
cfg80211 bcm2835_v4l2(CE) bcm2835_mmal_vchiq(CE) input_leds vc_sm_cma(CE)
v4l2_common videobuf2_vmalloc spidev videobuf2_memops videobuf2_v4l2
raspberrypi_hwmon videobuf2_common videodev mc uio_pdrv_genirq uio sch_fq_codel
jool(OE) jool_common(OE) nf_defrag_ipv6 nf_defrag_ipv4 ip_tables x_tables
autofs4 btrfs zstd_compress raid10 raid456 async_raid6_recov async_memcpy
async_pq async_xor async_tx xor xor_neon raid6_pq libcrc32c raid1 raid0
multipath linear hid_generic usbhid crct10dif_ce sdhci_iproc phy_generic fixed
aes_neon_bs aes_neon_blk crypto_simd cryptd aes_arm64
Feb 4 23:42:59 rpi3 kernel: [ 571.878774] CPU: 3 PID: 0 Comm: swapper/3
Tainted: G C OE 5.3.0-1017-raspi2 #19-Ubuntu
Feb 4 23:42:59 rpi3 kernel: [ 571.878781] Hardware name: Raspberry Pi 3
Model B Plus Rev 1.3 (DT)
Feb 4 23:42:59 rpi3 kernel: [ 571.878789] pstate: 60400005 (nZCv daif +PAN
-UAO)
Feb 4 23:42:59 rpi3 kernel: [ 571.878800] pc : dev_watchdog+0x324/0x330
Feb 4 23:42:59 rpi3 kernel: [ 571.878807] lr : dev_watchdog+0x324/0x330
Feb 4 23:42:59 rpi3 kernel: [ 571.878812] sp : ffff00001001bd60
Feb 4 23:42:59 rpi3 kernel: [ 571.878817] x29: ffff00001001bd60 x28:
0000000000000140
Feb 4 23:42:59 rpi3 kernel: [ 571.878827] x27: 00000000ffffffff x26:
0000000000000000
Feb 4 23:42:59 rpi3 kernel: [ 571.878836] x25: ffff8ecbefa4e000 x24:
ffff305e0f529018
Feb 4 23:42:59 rpi3 kernel: [ 571.878845] x23: 0000000000000000 x22:
0000000000000001
Feb 4 23:42:59 rpi3 kernel: [ 571.878853] x21: ffff8ecbefa4e480 x20:
ffff305e0f807000
Feb 4 23:42:59 rpi3 kernel: [ 571.878862] x19: 0000000000000000 x18:
0000000000000000
Feb 4 23:42:59 rpi3 kernel: [ 571.878871] x17: ffff000010fd8218 x16:
ffff305e0e30efb8
Feb 4 23:42:59 rpi3 kernel: [ 571.878879] x15: ffff8ecbf922a290 x14:
ffffffffffffffff
Feb 4 23:42:59 rpi3 kernel: [ 571.878888] x13: 0000000000000000 x12:
ffff305e0f944000
Feb 4 23:42:59 rpi3 kernel: [ 571.878897] x11: ffff305e0f82d000 x10:
0000000000000000
Feb 4 23:42:59 rpi3 kernel: [ 571.878905] x9 : 0000000000000004 x8 :
000000000000017f
Feb 4 23:42:59 rpi3 kernel: [ 571.878913] x7 : 0000000000000000 x6 :
0000000000000001
Feb 4 23:42:59 rpi3 kernel: [ 571.878921] x5 : 0000000000000000 x4 :
0000000000000008
Feb 4 23:42:59 rpi3 kernel: [ 571.878929] x3 : ffff305e0ee15750 x2 :
0000000000000004
Feb 4 23:42:59 rpi3 kernel: [ 571.878937] x1 : 6abb42c67c954600 x0 :
0000000000000000
Feb 4 23:42:59 rpi3 kernel: [ 571.878946] Call trace:
Feb 4 23:42:59 rpi3 kernel: [ 571.878955] dev_watchdog+0x324/0x330
Feb 4 23:42:59 rpi3 kernel: [ 571.878967] call_timer_fn+0x3c/0x178
Feb 4 23:42:59 rpi3 kernel: [ 571.878977] __run_timers.part.0+0x200/0x330
Feb 4 23:42:59 rpi3 kernel: [ 571.878985] run_timer_softirq+0x40/0x78
Feb 4 23:42:59 rpi3 kernel: [ 571.878995] __do_softirq+0x168/0x384
Feb 4 23:42:59 rpi3 kernel: [ 571.879007] irq_exit+0xb0/0xe8
Feb 4 23:42:59 rpi3 kernel: [ 571.879020] __handle_domain_irq+0x70/0xc0
Feb 4 23:42:59 rpi3 kernel: [ 571.879028]
bcm2836_arm_irqchip_handle_irq+0x74/0xe0
Feb 4 23:42:59 rpi3 kernel: [ 571.879037] el1_irq+0x108/0x200
Feb 4 23:42:59 rpi3 kernel: [ 571.879050] arch_cpu_idle+0x3c/0x1c8
Feb 4 23:42:59 rpi3 kernel: [ 571.879069] default_idle_call+0x24/0x48
Feb 4 23:42:59 rpi3 kernel: [ 571.879081] do_idle+0x210/0x2a0
Feb 4 23:42:59 rpi3 kernel: [ 571.879091] cpu_startup_entry+0x28/0x30
Feb 4 23:42:59 rpi3 kernel: [ 571.879102]
secondary_start_kernel+0x154/0x1c8
Feb 4 23:42:59 rpi3 kernel: [ 571.879108] ---[ end trace 349744d60a20e77a
]---
ProblemType: Bug
DistroRelease: Ubuntu 19.10
Package: linux-image-5.3.0-1017-raspi2 5.3.0-1017.19
ProcVersionSignature: Ubuntu 5.3.0-1017.19-raspi2 5.3.13
Uname: Linux 5.3.0-1017-raspi2 aarch64
ApportVersion: 2.20.11-0ubuntu8.2
Architecture: arm64
Date: Tue Feb 4 23:49:19 2020
ProcEnviron:
TERM=linux
PATH=(custom, no user)
LANG=C.UTF-8
SHELL=/bin/bash
SourcePackage: linux-raspi2
UpgradeStatus: No upgrade log present (probably fresh install)
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux-raspi2/+bug/1861936/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
