** Changed in: kunpeng920/ubuntu-19.04
Status: Fix Committed => Fix Released
** Changed in: kunpeng920/ubuntu-19.04
Milestone: None => ubuntu-19.04-sru-12
** Changed in: kunpeng920/ubuntu-18.04-hwe
Status: Fix Committed => Fix Released
** Changed in: kunpeng920/ubuntu-18.04-hwe
Milestone: ubuntu-18.04.5 => ubuntu-18.04.3-sru-7
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1853984
Title:
[hns-1126]net: hns3: fix port setting handle for fibre port
Status in kunpeng920:
Fix Committed
Status in kunpeng920 ubuntu-18.04 series:
Invalid
Status in kunpeng920 ubuntu-18.04-hwe series:
Fix Released
Status in kunpeng920 ubuntu-19.04 series:
Fix Released
Status in kunpeng920 ubuntu-19.10 series:
Fix Committed
Status in kunpeng920 ubuntu-20.04 series:
Fix Committed
Status in kunpeng920 upstream-kernel series:
Fix Released
Status in linux package in Ubuntu:
Fix Released
Status in linux source package in Disco:
Fix Released
Status in linux source package in Eoan:
Fix Committed
Status in linux source package in Focal:
Fix Released
Bug description:
[Impact]
For hardware doesn't support use specified speed and duplex
to negotiate, it's unnecessary to check and modify the port
speed and duplex for fibre port when autoneg is on.
[Test Case]
`sudo ethtool -s eno1 autoneg off speed 100000 duplex full`
`sudo ethtool -s eno1 autoneg on`
commands shall return 0
[Fix]
24283ece5a0f net: hns3: fix port setting handle for fibre port
[Regression Risk]
Patch restricted to hns3 driver.
"[Bug Description]
For hardware doesn't support use specified speed and duplex
to negotiate, it's unnecessary to check and modify the port
speed and duplex for fibre port when autoneg is on.
[Steps to Reproduce]
1.ethtool -s eth* autoneg off speed 100000 duplex full
2.ethtool -s eth* autoneg on
[Actual Results]
set autoneg on fail
[Expected Results]
set autoneg on ok
[Reproducibility]
Inevitably
[Additional information]
Hardware: D06
Firmware: NA
Kernel: NA
[Resolution]
Not check and modify the port speed and duplex for fibre port when autoneg
on."
net: hns3: fix port setting handle for fibre port
To manage notifications about this bug go to:
https://bugs.launchpad.net/kunpeng920/+bug/1853984/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : [email protected]
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
