I am seeing this in 13.10, on a Lenovo L430.
- There is no CD in the drive. The drive is empty.
- The physical switch on the CD-ROM drive also does nothing.
- The door works fine after reboot. It only gets locked after ejecting 1 CD.
- This happens when ejecting using Nautilus, and when ejecting using Unity dock
right-click-eject.
$ sudo eject -v
[sudo] password for xxx:
eject: using default device `cdrom'
eject: device name is `cdrom'
eject: expanded name is `/dev/cdrom'
eject: `/dev/cdrom' is a link to `/dev/sr0'
eject: `/dev/sr0' is not mounted
eject: `/dev/sr0' is not a mount point
eject: `/dev/sr0' is not a multipartition device
eject: trying to eject `/dev/sr0' using CD-ROM eject command
eject: CD-ROM eject command failed
eject: trying to eject `/dev/sr0' using SCSI commands
eject: SCSI eject failed
eject: trying to eject `/dev/sr0' using floppy eject command
eject: floppy eject command failed
eject: trying to eject `/dev/sr0' using tape offline command
eject: tape offline command failed
eject: unable to eject, last error: Inappropriate ioctl for device
$ sudo hdparm -I /dev/sr0
/dev/sr0:
ATAPI CD-ROM, with removable media
Model Number: HL-DT-ST DVDRAM GT80N
Serial Number: M8LD9N22229
Firmware Revision: LN81
Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions,
SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0
Standards:
Likely used CD-ROM ATAPI-1
Configuration:
DRQ response: 50us.
Packet size: 12 bytes
cache/buffer size = unknown
Capabilities:
LBA, IORDY(can be disabled)
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* Power Management feature set
* PACKET command feature set
* DEVICE_RESET command
* NOP cmd
* 64-bit World wide name
* Gen1 signaling speed (1.5Gb/s)
* Phy event counters
Device-initiated interface power management
Asynchronous notification (eg. media change)
* Software settings preservation
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to eject in Ubuntu.
https://bugs.launchpad.net/bugs/442282
Title:
CDROM door does not open
Status in “eject” package in Ubuntu:
Confirmed
Bug description:
Binary package hint: eject
root@dell-desktop:~# eject -v /dev/sr0
eject: device name is `/dev/sr0'
eject: expanded name is `/dev/sr0'
eject: `/dev/sr0' is not mounted
eject: `/dev/sr0' is not a mount point
eject: `/dev/sr0' is not a multipartition device
eject: trying to eject `/dev/sr0' using CD-ROM eject command
eject: CD-ROM eject command failed
eject: trying to eject `/dev/sr0' using SCSI commands
eject: SCSI eject succeeded
However, nothing happens and the door remains shut.
ProblemType: Bug
Architecture: i386
Date: Sun Oct 4 07:33:11 2009
DistroRelease: Ubuntu 9.10
Package: eject 2.1.5+deb1+cvs20081104-6
ProcEnviron:
PATH=(custom, user)
LANG=en_US.UTF-8
SHELL=/bin/bash
ProcVersionSignature: Ubuntu 2.6.31-11.36-generic
SourcePackage: eject
Uname: Linux 2.6.31-11-generic i686
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/eject/+bug/442282/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
