lspci from Ubuntu 11.10 working kernel
Linux ubuntu 3.0.0-12-generic #20-Ubuntu SMP Fri Oct 7 14:56:25 UTC 2011 x86_64
x86_64 x86_64 GNU/Linux
03:00.0 0c03: 1b6f:7023 (rev 01) (prog-if 30 [XHCI])
Subsystem: 1b6f:7023
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 40
Region 0: Memory at fe8f8000 (64-bit, non-prefetchable) [size=32K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [70] MSI: Enable+ Count=1/4 Maskable+ 64bit+
Address: 00000000fee0100c Data: 4169
Masking: 0000000e Pending: 00000000
Capabilities: [a0] Express (v2) Endpoint, MSI 01
DevCap: MaxPayload 1024 bytes, PhantFunc 0, Latency L0s <64ns,
L1 <1us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0
<1us, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-,
Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB
Kernel driver in use: xhci_hcd
Kernel modules: xhci-hcd
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1822363
Title:
Booting hangs when USB 3.0 Etron EJ168 PCI card is detected
Status in linux package in Ubuntu:
Confirmed
Bug description:
I have installed Etron EJ168 PCI USB 3.0 [1B6F:7023] which briliantly works
in any Windows OS (I use multiboot PC) on my Conroe865PE AGP/PCI Intel
Kentsfield QX6800 system with classic BIOS (non UEFI).
There are no devices connected to PCI USB card during boot.
The desktop Ubuntu 18.04 kernel 4.15.0-46-generic freezes with this
card during boot (see attached "photo log" with boot and grub
options). I can't access/login Ubuntu or console. It was checked and
confirmed on ubuntu-18.04.1-desktop-amd64.iso LIVE CD desktop (with
acpi=off option too).
Previously I was used and removed USB 3.0 NEC Renesas upd720200 PCI card
[1033:0194], which was partially workable under my installation of Ubuntu 18.04
and Windows. It had problems from time to time with FW load from card on start
and not detecting USB devices connected even if FW present.
I tried and also removed USB 3.0 NEC Renesas upd720202 PCI card [1912:0015]
which also was partially workable in the same way (other card bios and newer
NEC chip). System was fully bootable with NEC cards.
The Etron EJ168 works superb on Windows OS's with directly or with hub
connections with USB devices.
I can assist in any way to solve this bug as IT Professional.
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1822363/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
