Can you try v4.13? There's a new commit introduced in v4.14:
commit ecc1165b8b743fd1503b9c799ae3a9933b89877b
Author: Rafael J. Wysocki <rafael.j.wyso...@intel.com>
Date: Thu Aug 10 00:30:09 2017 +0200
ACPICA: Dispatch active GPEs at init time
In some cases GPEs are already active when they are enabled by
acpi_ev_initialize_gpe_block() and whatever happens next may depend
on the result of handling the events signaled by them, so the
events should not be discarded (which is what happens currently) and
they should be handled as soon as reasonably possible.
For this reason, modify acpi_ev_initialize_gpe_block() to
dispatch GPEs with the status flag set in-band right after
enabling them.
Signed-off-by: Rafael J. Wysocki <rafael.j.wyso...@intel.com>
Tested-by: Mika Westerberg <mika.westerb...@linux.intel.com>
Let's see if this commit introduce the regression.
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1799235
Title:
kworker process starts at 85% of cpu and stays there
Status in linux package in Ubuntu:
Confirmed
Bug description:
Ubuntu starts, w/ /sbin/init, a kworker process that never stops
running below 85%:
pb@pb-tower:~/Downloads$ ps -elf
F S UID PID PPID C PRI NI ADDR SZ WCHAN STIME TTY TIME CMD
4 S root 1 0 0 80 0 - 56471 - 18:30 ? 00:00:01
/sbin/init splash
1 S root 2 0 0 80 0 - 0 - 18:30 ? 00:00:00
[kthreadd]
1 R root 85 2 63 80 0 - 0 - 18:30 ?
00:03:03 [kworker/0:1+kac]
After a few hours, grep . -r /sys/firmware/acpi/interrupts/ shows tens of
millions of interrupts.
The following command line stops the kworker process:
echo "disable" > /sys/firmware/acpi/interrupts/gpe6F
On the other hand, I haven't been able to properly shut down my system
after this command (power never goes off except manually).
I believe the bug is related to the one discussed here:
https://superuser.com/questions/1117992/acpi-exception-ae-not-found-
while-evaluating-gpe-method-floods-syslog
The dmesg w/ this report may be somewhat confusing because there is an
unsigned module. But w/ the module removed, dmesg gives the
following:
[ 0.097480] ACPI: Dynamic OEM Table Load:
[ 0.097480] ACPI: SSDT 0xFFFFA07F57173000 000317 (v02 PmRef ApHwp
00003000 INTL 20160527)
[ 0.097480] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.100180] ACPI: Dynamic OEM Table Load:
[ 0.100186] ACPI: SSDT 0xFFFFA07F577EF400 00030A (v02 PmRef ApCst
00003000 INTL 20160527)
[ 0.100473] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.102187] ACPI: Interpreter enabled
[ 0.102222] ACPI: (supports S0 S3 S4 S5)
[ 0.102223] ACPI: Using IOAPIC for interrupt routing
[ 0.102275] HEST: Table parsing has been initialized.
[ 0.102277] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[ 0.103580] ACPI: GPE 0x20 active on init
[ 0.104031] ACPI Error: No handler for Region [WST1] ( (ptrval))
[GenericSerialBus] (20170831/evregion-166)
[ 0.104035] ACPI Error: Region GenericSerialBus (ID=9) has no handler
(20170831/exfldio-299)
[ 0.104040]
Initialized Local Variables for Method [PAS1]:
[ 0.104041] Local0: (ptrval) <Obj> Integer
0000000000000001
[ 0.104045] No Arguments are initialized for method [PAS1]
[ 0.104046] ACPI Error: Method parse/execution failed \_SB.PCI0.I2C0.PAS1,
AE_NOT_EXIST (20170831/psparse-550)
[ 0.104052] ACPI Error: Method parse/execution failed \_GPE._L20,
AE_NOT_EXIST (20170831/psparse-550)
[ 0.104058] ACPI Exception: AE_NOT_EXIST, while evaluating GPE method
[_L20] (20170831/evgpe-646)
[ 0.104005] ACPI: GPE 0x6F active on init
[ 0.104005] ACPI: Enabled 10 GPEs in block 00 to 7F
[ 0.212126] ACPI: Power Resource [USBC] (on)
[ 0.444270] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.444270] pci 0000:06:00.1: [1033:00e0] type 00 class 0x0c0320
[ 0.444270] pci 0000:06:00.1: reg 0x10: [mem 0xa2000000-0xa20000ff]
[ 0.444278] pci 0000:06:00.1: supports D1 D2
[ 0.444278] pci 0000:06:00.1: PME# supported from D0 D1 D2 D3hot
[ 0.444278] pci 0000:05:00.0: PCI bridge to [bus 06]
[ 0.444278] pci 0000:05:00.0: bridge window [mem 0xa2000000-0xa20fffff]
[ 0.456183] ACPI: PCI Interrupt Link [LNKA] (IRQs) *0
[ 0.456183] ACPI: PCI Interrupt Link [LNKB] (IRQs) *1
[ 0.456183] ACPI: PCI Interrupt Link [LNKC] (IRQs) *0
[ 0.456183] ACPI: PCI Interrupt Link [LNKD] (IRQs) *1
[ 0.456183] ACPI: PCI Interrupt Link [LNKE] (IRQs) *1
[ 0.456183] ACPI: PCI Interrupt Link [LNKF] (IRQs) *1
[ 0.456183] ACPI: PCI Interrupt Link [LNKG] (IRQs) *1
[ 0.456183] ACPI: PCI Interrupt Link [LNKH] (IRQs) *1
[ 0.464184] SCSI subsystem initialized
[ 0.464186] libata version 3.00 loaded.
[ 0.464186] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 1.225495] Scanning for low memory corruption every 60 seconds
[ 1.226265] Initialise system trusted keyrings
[ 1.226271] Key type blacklist registered
[ 1.226399] workingset: timestamp_bits=36 max_order=23 bucket_order=0
[ 1.227127] zbud: loaded
[ 1.227482] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.227769] fuse init (API version 7.26)
[ 1.233972] Key type asymmetric registered
[ 1.233973] Asymmetric key parser 'x509' registered
[ 1.233991] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 246)
[ 1.234105] io scheduler noop registered
[ 1.234105] io scheduler deadline registered
[ 1.234131] io scheduler cfq registered (default)
[ 1.238792] pcieport 0000:00:1b.0: AER enabled with IRQ 122
[ 1.238819] pcieport 0000:00:1b.4: AER enabled with IRQ 123
[ 1.238845] pcieport 0000:00:1d.2: AER enabled with IRQ 124
[ 1.238863] dpc 0000:00:1b.0:pcie010: DPC error containment capabilities:
Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[ 1.238874] dpc 0000:00:1b.4:pcie010: DPC error containment capabilities:
Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[ 1.238886] dpc 0000:00:1d.2:pcie010: DPC error containment capabilities:
Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[ 1.238925] efifb: probing for efifb
[ 1.378346] ACPI: Thermal Zone [TZ00] (28 C)
[ 1.378390] ERST: Error Record Serialization Table (ERST) support is
initialized.
[ 1.378391] pstore: using zlib compression
[ 1.378393] pstore: Registered erst as persistent store backend
[ 1.378456] GHES: APEI firmware first mode is enabled by APEI bit.
[ 1.378659] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.400977] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a
16550A
[ 1.405952] Linux agpgart interface v0.103
[ 1.433815] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0xFC, rev-id 1)
[ 1.444950] tpm tpm0: A TPM error (2314) occurred continue selftest
[ 1.798436] loop: module loaded
ProblemType: Bug
DistroRelease: Ubuntu 18.04
Package: linux-image-4.15.0-36-generic 4.15.0-36.39
ProcVersionSignature: Ubuntu 4.15.0-36.39-generic 4.15.18
Uname: Linux 4.15.0-36-generic x86_64
ApportVersion: 2.20.9-0ubuntu7.4
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: pm 2353 F.... pulseaudio
/dev/snd/controlC1: pm 2353 F.... pulseaudio
Date: Mon Oct 22 09:21:42 2018
HibernationDevice: RESUME=UUID=5636f256-e713-4bd0-a4f0-535a151ca3b1
InstallationDate: Installed on 2018-09-19 (32 days ago)
InstallationMedia: Ubuntu 18.04.1 LTS "Bionic Beaver" - Release amd64
(20180725)
Lsusb:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 003: ID 8087:0025 Intel Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
MachineType: Dell Inc. Precision 3630 Tower
ProcEnviron:
LANGUAGE=
TERM=xterm-256color
PATH=(custom, no user)
LANG=en_US.UTF-8
SHELL=/bin/bash
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-4.15.0-36-generic
root=/dev/mapper/ubuntu--vg-root ro quiet splash
PulseList:
Error: command ['pacmd', 'list'] failed with exit code 1: Home directory not
accessible: Permission denied
No PulseAudio daemon running, or not running as session daemon.
RelatedPackageVersions:
linux-restricted-modules-4.15.0-36-generic N/A
linux-backports-modules-4.15.0-36-generic N/A
linux-firmware 1.173.1
SourcePackage: linux
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 05/30/2018
dmi.bios.vendor: Dell Inc.
dmi.bios.version: 1.0.1
dmi.board.name: 0NNNCT
dmi.board.vendor: Dell Inc.
dmi.board.version: A00
dmi.chassis.type: 3
dmi.chassis.vendor: Dell Inc.
dmi.modalias:
dmi:bvnDellInc.:bvr1.0.1:bd05/30/2018:svnDellInc.:pnPrecision3630Tower:pvr:rvnDellInc.:rn0NNNCT:rvrA00:cvnDellInc.:ct3:cvr:
dmi.product.family: Precision
dmi.product.name: Precision 3630 Tower
dmi.sys.vendor: Dell Inc.
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1799235/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : kernel-packages@lists.launchpad.net
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
