You have been subscribed to a public bug:
I'm dual-booting Ubuntu 18.04 and Windows 10. If I turn off my computer
with Windows, I can turn it back on using wol. However, if I turn it off
using Ubuntu the computer won't turn back on if I use wol.
These are my network cards:
```
ignacio@ignacio-XPS-8930:~$ ifconfig
docker0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 172.17.0.1 netmask 255.255.0.0 broadcast 172.17.255.255
inet6 fe80::42:e4ff:fe0a:9fee prefixlen 64 scopeid 0x20<link>
ether 02:42:e4:0a:9f:ee txqueuelen 0 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 165 bytes 24102 (24.1 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
enp4s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.86.31 netmask 255.255.255.0 broadcast 192.168.86.255
inet6 fe80::955b:12c8:20b9:7645 prefixlen 64 scopeid 0x20<link>
ether d8:9e:f3:85:42:8a txqueuelen 1000 (Ethernet)
RX packets 50484 bytes 52395285 (52.3 MB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 29166 bytes 4575560 (4.5 MB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 19
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 1124 bytes 95423 (95.4 KB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 1124 bytes 95423 (95.4 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
veth66fe4e4: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet6 fe80::2078:3ff:feb3:2aa1 prefixlen 64 scopeid 0x20<link>
ether 22:78:03:b3:2a:a1 txqueuelen 0 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 224 bytes 30503 (30.5 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
vethb50cc6f: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet6 fe80::5c0b:47ff:fef1:cfc9 prefixlen 64 scopeid 0x20<link>
ether 5e:0b:47:f1:cf:c9 txqueuelen 0 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 125 bytes 18006 (18.0 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlp3s0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 5c:ea:1d:4c:61:a7 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
```
This is what ethtool tells me about my ethernet card:
```
ignacio@ignacio-XPS-8930:~$ sudo ethtool enp4s0
Settings for enp4s0:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: Yes
Supported FEC modes: Not reported
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised pause frame use: Symmetric
Advertised auto-negotiation: Yes
Advertised FEC modes: Not reported
Speed: 1000Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 0
Transceiver: internal
Auto-negotiation: on
MDI-X: Unknown
Current message level: 0x000060e4 (24804)
link ifup rx_err tx_err hw wol
Link detected: yes
```
And this is what happens when I try to activate wake on lan:
```
ignacio@ignacio-XPS-8930:~$ sudo ethtool -s enp4s0 wol g
Cannot get current wake-on-lan settings: Operation not supported
not setting wol
```
Finally, this is the infor about my distro:
```
ignacio@ignacio-XPS-8930:~$ lsb_release -rd
Description: Ubuntu 18.04 LTS
Release: 18.04
```
Thanks for the help!
ProblemType: Bug
DistroRelease: Ubuntu 18.04
Package: ethtool 1:4.15-0ubuntu1
ProcVersionSignature: Ubuntu 4.15.0-23.25-generic 4.15.18
Uname: Linux 4.15.0-23-generic x86_64
NonfreeKernelModules: nvidia_modeset nvidia
ApportVersion: 2.20.9-0ubuntu7.2
Architecture: amd64
CurrentDesktop: ubuntu:GNOME
Date: Mon Jul 9 18:58:08 2018
Dependencies:
gcc-8-base 8-20180414-1ubuntu2
libc6 2.27-3ubuntu1
libgcc1 1:8-20180414-1ubuntu2
InstallationDate: Installed on 2018-07-07 (2 days ago)
InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Release amd64 (20180426)
SourcePackage: ethtool
UpgradeStatus: No upgrade log present (probably fresh install)
** Affects: linux (Ubuntu)
Importance: Undecided
Status: New
** Tags: amd64 apport-bug bionic
--
wake on lan is not working
https://bugs.launchpad.net/bugs/1780872
You received this bug notification because you are a member of Kernel Packages,
which is subscribed to linux in Ubuntu.
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : [email protected]
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
