Does this mean that the firmware will not be added to artful? -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-firmware in Ubuntu. https://bugs.launchpad.net/bugs/1520343
Title: Qualcomm Atheros wireless card [168c:003e] (rev 32) not supported Status in HWE Next: New Status in OEM Priority Project: Triaged Status in linux-firmware package in Ubuntu: Confirmed Bug description: --------------------------------------------------------------- STATUS 2016-03-17: ========== WARNING: You need at least kernel 4.5.0 for the following new fix to work, else refer to the old method described in post #22 ========== The support for this card has now been merged to https://github.com/kvalo/ath10k-firmware. The repository now contains the required board.bin, board-2.bin and firmware-4.bin files for the card to initialize and connect to a bgn-access point (5GHz (ac- protocol) is still untested, feel free to modify this if you can confirm it works). Here are the new commands to get you online: sudo mkdir -p /lib/firmware/ath10k/QCA6174/hw3.0/ sudo rm /lib/firmware/ath10k/QCA6174/hw3.0/* 2> /dev/null sudo wget -O /lib/firmware/ath10k/QCA6174/hw3.0/board.bin https://github.com/kvalo/ath10k- firmware/blob/master/QCA6174/hw3.0/board.bin?raw=true sudo wget -O /lib/firmware/ath10k/QCA6174/hw3.0/board-2.bin https://github.com/kvalo/ath10k- firmware/blob/master/QCA6174/hw3.0/board-2.bin?raw=true sudo wget -O /lib/firmware/ath10k/QCA6174/hw3.0/firmware-4.bin https://github.com/kvalo/ath10k- firmware/blob/master/QCA6174/hw3.0/firmware-4.bin_WLAN.RM.2.0-00180-QCARMSWPZ-1?raw=true Reboot or reload the ath10k_pci module and you should be able to connect! --------------------------------------------------------------- STATUS 2015-12-22: Currently there is a fix for this problem in post #22 (originally post #19, but reposted due to command typos!) which seems to have fixed the issue for many. This bug is unique to revision 32 of the card [168c:003e], fixes for older revisions don't seem to work. There are a couple of issues regarding the fix for some people (not all): 1. Wireless works, but network throughput stops some time after connecting to access point 2. Bluetooth communications take a noticeable performance hit when transferring something over WiFi --------------------------------------------------------------- Original description: I have recently installed Ubuntu 15.10 (64-bit) alongside Windows 10 on an Acer Aspire VN7-792G-76ZH and discovered, that the Qualcomm wireless card doesn't work in it or 16.04. The card has the device id 168c:003e as many other cards, for example the Qualcomm Atheros Killer (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1383184), but it has a newer revision number (32) and the suggested fixes work only partially and the wireless is unusable. The computer has just been released this summer and is Intel Skylake -based. I've tried the patch from bug 1383184, which has a fix for the card revision 20: Make the directory /lib/firmware/ath10k/QCA6174/hw3.0/ and put in the patch files: board.bin firmware-4.bin notice_ath10k_firmware-4.txt ath10k_pci succeeds in loading the firmware, but it seems that the firmware is not working correctly: dmesg | grep ath [ 5.452683] ath10k_pci 0000:07:00.0: pci irq msi-x interrupts 8 irq_mode 0 reset_mode 0 [ 5.678420] ath10k_pci 0000:07:00.0: Direct firmware load for ath10k/cal-pci-0000:07:00.0.bin failed with error -2 [ 5.678773] ath10k_pci 0000:07:00.0: Direct firmware load for ath10k/QCA6174/hw3.0/board-pci-168c:003e:11ad:0807.bin failed with error -2 [ 5.678781] ath10k_pci 0000:07:00.0: failed to load spec board file, falling back to generic: -2 [ 5.679445] ath10k_pci 0000:07:00.0: Direct firmware load for ath10k/QCA6174/hw3.0/firmware-5.bin failed with error -2 [ 5.679453] ath10k_pci 0000:07:00.0: could not fetch firmware file 'ath10k/QCA6174/hw3.0/firmware-5.bin': -2 [ 7.802316] ath10k_pci 0000:07:00.0: qca6174 hw3.2 (0x05030000, 0x00340aff, 168c:003e:11ad:0807 fallback) fw WLAN.RM.2.0-00180-QCARMSWPZ-1 api 4 htt 3.26 wmi 4 cal otp max_sta 32 [ 7.802329] ath10k_pci 0000:07:00.0: debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [ 8.200607] ath: EEPROM regdomain: 0x6c [ 8.200614] ath: EEPROM indicates we should expect a direct regpair map [ 8.200619] ath: Country alpha2 being used: 00 [ 8.200621] ath: Regpair used: 0x6c [ 8.216605] ath10k_pci 0000:07:00.0 wlp7s0: renamed from wlan0 [ 13.462029] ath10k_pci 0000:07:00.0: failed to enable dynamic BW: -11 [ 16.461416] ath10k_pci 0000:07:00.0: could not suspend target (-11) [ 24.760062] ath10k_pci 0000:07:00.0: failed to enable dynamic BW: -11 [ 27.759534] ath10k_pci 0000:07:00.0: could not suspend target (-11) [ 36.046205] ath10k_pci 0000:07:00.0: failed to set arp ac override parameter: -11 [ 39.045729] ath10k_pci 0000:07:00.0: could not suspend target (-11) [ 47.344304] ath10k_pci 0000:07:00.0: failed to enable dynamic BW: -11 [ 50.343794] ath10k_pci 0000:07:00.0: could not suspend target (-11) [ 58.630534] ath10k_pci 0000:07:00.0: failed to enable dynamic BW: -11 [ 61.629936] ath10k_pci 0000:07:00.0: could not suspend target (-11) [ 69.920624] ath10k_pci 0000:07:00.0: failed to enable dynamic BW: -11 [ 72.920132] ath10k_pci 0000:07:00.0: could not suspend target (-11) [ 81.206812] ath10k_pci 0000:07:00.0: failed to enable dynamic BW: -11 [ 84.206218] ath10k_pci 0000:07:00.0: could not suspend target (-11) ... Then it just constantly prints the last two messages on and on. I can weirdly enough see the card in iwconfig: wlp7s0 IEEE 802.11abgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry short limit:7 RTS thr:off Fragment thr:off Power Management:off And I can see the wireless-icon in the toolbar, but scanning for access points or trying to connect to one doesn't work. This is the furthest I've gotten. I suspect this card needs a new firmware in ath10k? --- ApportVersion: 2.19.2-0ubuntu6 Architecture: amd64 AudioDevicesInUse: USER PID ACCESS COMMAND /dev/snd/controlC0: dennis 1230 F.... pulseaudio CurrentDesktop: GNOME DistroRelease: Ubuntu 16.04 HibernationDevice: RESUME=UUID=bed7757a-3749-4efb-9e9f-0ce8129bfbb9 InstallationDate: Installed on 2015-11-11 (15 days ago) InstallationMedia: Ubuntu-GNOME 16.04 LTS "Xenial Xerus" - Alpha amd64 (20151110) Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 04f2:b520 Chicony Electronics Co., Ltd Bus 001 Device 002: ID 04ca:3016 Lite-On Technology Corp. Bus 001 Device 004: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Acer Aspire VN7-792G Package: linux (not installed) ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.2.0-19-generic.efi.signed root=UUID=bdadfbdf-2233-46de-b804-c88712e6c518 ro ipv6.disable=1 i915.preliminary_hw_support=1 ProcVersionSignature: Ubuntu 4.2.0-19.23-generic 4.2.6 RelatedPackageVersions: linux-restricted-modules-4.2.0-19-generic N/A linux-backports-modules-4.2.0-19-generic N/A linux-firmware 1.153 Tags: xenial UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' Uname: Linux 4.2.0-19-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm bumblebee cdrom dip lpadmin plugdev sambashare sudo _MarkForUpload: True dmi.bios.date: 09/25/2015 dmi.bios.vendor: Insyde Corp. dmi.bios.version: V1.02 dmi.board.asset.tag: No Asset Tag dmi.board.name: Aspire VN7-792G dmi.board.vendor: Acer dmi.board.version: V1.02 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: Acer dmi.chassis.version: V1.02 dmi.modalias: dmi:bvnInsydeCorp.:bvrV1.02:bd09/25/2015:svnAcer:pnAspireVN7-792G:pvrV1.02:rvnAcer:rnAspireVN7-792G:rvrV1.02:cvnAcer:ct10:cvrV1.02: dmi.product.name: Aspire VN7-792G dmi.product.version: V1.02 dmi.sys.vendor: Acer To manage notifications about this bug go to: https://bugs.launchpad.net/hwe-next/+bug/1520343/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
