not sure if it helps, but please /proc/ioports below. There is a difference between kernel 4.13 (not working) and kernel 4.5.7 (working):
kernel 4.5.7 (working): 0220-022e : nuvoton-cir 02e0-02ee : nuvoton-cir kernel 4.13 before suspend and before module reload (not working): 03e0-03ee : nuvoton-cir 0a20-0a2e : nuvoton-cir-wake kernel 4.13 after suspend and module reload (working): 0220-022e : nuvoton-cir-wake 02e0-02ee : nuvoton-cir Maybe resource allocation is causing issues here.... -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1730958 Title: nuvoton-cir not working after boot Status in linux package in Ubuntu: Confirmed Bug description: Current setup/failing setup: Linux frontend01 4.13.0-17-generic #20-Ubuntu SMP Mon Nov 6 10:04:08 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux Ubuntu 4.13.0-17.20-generic 4.13.8 Ubuntu 17.10, 4.13.0-17-generic Nuvoton w836x7hg Infrared Remote Transceiver Zotac ID42 Working setup: Ubuntu 17.10, 4.4.8-040408-generic I'm not able to get the remote working after a normal reboot (using 4.13 kernel) It does actually after a suspend and wake-up, and do a echo 'auto' to resources. Please find snapshot of dmesg below: [ 14.067757] nuvoton-cir 00:0a: found NCT6776F or compatible: chip id: 0xc3 0x33 [ 14.468143] rc rc0: Nuvoton w836x7hg Infrared Remote Transceiver as /devices/pnp0/00:0a/rc/rc0 [ 14.468227] input: Nuvoton w836x7hg Infrared Remote Transceiver as /devices/pnp0/00:0a/rc/rc0/input7 [ 14.468484] rc rc0: lirc_dev: driver ir-lirc-codec (nuvoton-cir) registered at minor = 0 [ 14.468526] nuvoton-cir 00:0a: driver has been successfully loaded <snip> modprobe -r nuvoton-cir echo "auto" > /sys/bus/acpi/devices/NTN0530\:00/physical_node/resources modprobe nuvoton-cir <snip> [ 66.231365] nuvoton-cir 00:0a: found NCT6776F or compatible: chip id: 0xc3 0x33 [ 66.231610] rc rc0: Nuvoton w836x7hg Infrared Remote Transceiver as /devices/pnp0/00:0a/rc/rc0 [ 66.231758] input: Nuvoton w836x7hg Infrared Remote Transceiver as /devices/pnp0/00:0a/rc/rc0/input13 [ 66.232140] rc rc0: lirc_dev: driver ir-lirc-codec (nuvoton-cir) registered at minor = 0 [ 66.232240] nuvoton-cir 00:0a: driver has been successfully loaded <snip> suspend/resume [ 105.890769] nuvoton-cir 00:0a: disabled [ 106.651982] nuvoton-cir 00:0a: activated <snip> modprobe -r nuvoton-cir echo "auto" > /sys/bus/acpi/devices/NTN0530\:00/physical_node/resources modprobe nuvoton-cir <snip> [ 138.549572] nuvoton-cir 00:0a: found NCT6776F or compatible: chip id: 0xc3 0x33 [ 138.549839] rc rc0: Nuvoton w836x7hg Infrared Remote Transceiver as /devices/pnp0/00:0a/rc/rc0 [ 138.551225] input: Nuvoton w836x7hg Infrared Remote Transceiver as /devices/pnp0/00:0a/rc/rc0/input17 [ 138.552171] rc rc0: lirc_dev: driver ir-lirc-codec (nuvoton-cir) registered at minor = 0 [ 138.552256] nuvoton-cir 00:0a: driver has been successfully loaded In order to get the device working I need the following in this order: * suspend/resume * echo "auto" > /sys/bus/acpi/devices/NTN0530\:00/physical_node/resources --- ApportVersion: 2.20.7-0ubuntu3.1 Architecture: amd64 AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/hwC1D0', '/dev/snd/pcmC1D7p', '/dev/snd/pcmC1D3p', '/dev/snd/controlC1', '/dev/snd/hwC0D0', '/dev/snd/pcmC0D1p', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/controlC0', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1: DistroRelease: Ubuntu 17.10 HibernationDevice: RESUME=UUID=d95eb1c2-ba63-486d-9da0-8b4c785342d6 InstallationDate: Installed on 2014-04-01 (1317 days ago) InstallationMedia: Mythbuntu 12.04.3 "Precise Pangolin" - Release amd64 (20130820) MachineType: ZOTAC ZBOX-ID42-BE NonfreeKernelModules: nvidia_uvm nvidia_drm nvidia_modeset nvidia Package: linux (not installed) ProcFB: 0 VESA VGA ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.13.0-17-generic root=UUID=e870e449-a4ea-4551-b4a6-32e3966a1789 ro splash quiet vt.handoff=7 ProcVersionSignature: Ubuntu 4.13.0-17.20-generic 4.13.8 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: linux-restricted-modules-4.13.0-17-generic N/A linux-backports-modules-4.13.0-17-generic N/A linux-firmware 1.169 Tags: artful Uname: Linux 4.13.0-17-generic x86_64 UpgradeStatus: Upgraded to artful on 2017-11-05 (2 days ago) UserGroups: adm audio cdrom dip lpadmin mythtv nopasswdlogin plugdev sambashare sudo video _MarkForUpload: True dmi.bios.date: 05/03/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: B201P010 dmi.board.asset.tag: NA dmi.board.name: ZBOX-ID42-BE dmi.board.vendor: ZOTAC dmi.board.version: XX dmi.chassis.asset.tag: NA dmi.chassis.type: 3 dmi.chassis.vendor: NA dmi.chassis.version: NA dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrB201P010:bd05/03/2013:svnZOTAC:pnZBOX-ID42-BE:pvrXX:rvnZOTAC:rnZBOX-ID42-BE:rvrXX:cvnNA:ct3:cvrNA: dmi.product.family: NA dmi.product.name: ZBOX-ID42-BE dmi.product.version: XX dmi.sys.vendor: ZOTAC To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1730958/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
