It's still showing up with pcie_aspm=off (and ppa kernel):
$ cat /proc/cmdline
BOOT_IMAGE=/boot/vmlinuz-4.11.0-041100rc6-generic
root=UUID=e38db0de-7f52-4cab-839b-6bfb046d4665 ro acpi_rev_override quiet
splash vt.handoff=7 pcie_aspm=off
$ dmesg
(...)
[ 352.877941] ata2.00: exception Emask 0x10 SAct 0x1000000 SErr 0x4050000
action 0xe frozen
[ 352.877946] ata2.00: irq_stat 0x00000040, connection status changed
[ 352.877948] ata2: SError: { PHYRdyChg CommWake DevExch }
[ 352.877952] ata2.00: failed command: READ FPDMA QUEUED
[ 352.877957] ata2.00: cmd 60/08:c0:18:f6:f0/00:00:11:00:00/40 tag 24 ncq dma
4096 in
res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA
bus error)
[ 352.877959] ata2.00: status: { DRDY }
[ 352.877963] ata2: hard resetting link
[ 353.590145] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 353.591464] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 353.591466] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[ 353.591468] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[ 353.591564] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device
(Stat=0x51 Err=0x04)
[ 353.594283] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 353.594285] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[ 353.594286] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[ 353.594354] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device
(Stat=0x51 Err=0x04)
[ 353.595861] ata2.00: configured for UDMA/133
[ 353.595865] ahci 0000:00:17.0: port does not support device sleep
[ 353.595921] ata2: EH complete
[ 358.035306] ata2.00: exception Emask 0x10 SAct 0x800 SErr 0x4050000 action
0xe frozen
[ 358.035309] ata2.00: irq_stat 0x00000040, connection status changed
[ 358.035310] ata2: SError: { PHYRdyChg CommWake DevExch }
[ 358.035311] ata2.00: failed command: READ FPDMA QUEUED
[ 358.035314] ata2.00: cmd 60/08:58:90:f8:f0/00:00:11:00:00/40 tag 11 ncq dma
4096 in
res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA
bus error)
[ 358.035315] ata2.00: status: { DRDY }
[ 358.035317] ata2: hard resetting link
[ 358.747460] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 358.748472] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 358.748474] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[ 358.748475] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[ 358.748507] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device
(Stat=0x51 Err=0x04)
[ 358.750983] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 358.750985] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[ 358.750985] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[ 358.751030] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device
(Stat=0x51 Err=0x04)
[ 358.752636] ata2.00: configured for UDMA/133
[ 358.752640] ahci 0000:00:17.0: port does not support device sleep
[ 358.752680] ata2: EH complete
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1681313
Title:
"port does not support device sleep" on Dell Precision 5520
Status in linux package in Ubuntu:
Incomplete
Bug description:
I'm seeing messages like below on Dell Precision 5520, which is on an
Ubuntu certified hardware list:
https://certification.ubuntu.com/hardware/201610-25144/
BIOS is updated to the latest version available: 1.1.3
The system has this SATA controller:
00:17.0 SATA controller: Intel Corporation Sunrise Point-H SATA
controller [AHCI mode] (rev 31)
And this 256 GB SSD disk:
Model Number: SanDisk X400 2.5 7MM 256GB
Firmware Revision: X4130012
There is a firmware upgrade available for SSD storage on Dell website,
but unfortunately, the installer is Windows only (a weird thing for a
Ubuntu certified hardware IMO) - therefore, I was no able to apply it.
dmesg entries which show up follow below:
[35713.825698] ata2.00: exception Emask 0x10 SAct 0x4 SErr 0x4050000 action
0xe frozen
[35713.825701] ata2.00: irq_stat 0x00000040, connection status changed
[35713.825703] ata2: SError: { PHYRdyChg CommWake DevExch }
[35713.825704] ata2.00: failed command: WRITE FPDMA QUEUED
[35713.825707] ata2.00: cmd 61/18:10:e0:8d:0a/00:00:12:00:00/40 tag 2 ncq
12288 out
res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x10
(ATA bus error)
[35713.825709] ata2.00: status: { DRDY }
[35713.825711] ata2: hard resetting link
[35714.549641] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[35714.550813] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[35714.550816] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[35714.550818] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[35714.550975] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by
device (Stat=0x51 Err=0x04)
[35714.553832] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[35714.553835] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[35714.553837] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[35714.553886] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by
device (Stat=0x51 Err=0x04)
[35714.555383] ata2.00: configured for UDMA/133
[35714.555399] ahci 0000:00:17.0: port does not support device sleep
[35714.555493] ata2: EH complete
[36324.490477] ata2.00: exception Emask 0x10 SAct 0x40000000 SErr 0x4050000
action 0xe frozen
[36324.490480] ata2.00: irq_stat 0x00000040, connection status changed
[36324.490482] ata2: SError: { PHYRdyChg CommWake DevExch }
[36324.490484] ata2.00: failed command: WRITE FPDMA QUEUED
[36324.490487] ata2.00: cmd 61/18:f0:68:08:85/00:00:07:00:00/40 tag 30 ncq
12288 out
res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x10
(ATA bus error)
[36324.490488] ata2.00: status: { DRDY }
[36324.490490] ata2: hard resetting link
[36325.214543] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[36325.215658] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[36325.215660] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[36325.215662] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[36325.215731] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by
device (Stat=0x51 Err=0x04)
[36325.218240] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[36325.218242] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[36325.218243] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[36325.218293] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by
device (Stat=0x51 Err=0x04)
[36325.219965] ata2.00: configured for UDMA/133
[36325.219982] ahci 0000:00:17.0: port does not support device sleep
[36325.220079] ata2: EH complete
[38355.555685] ata2.00: exception Emask 0x10 SAct 0x8000000 SErr 0x4050000
action 0xe frozen
[38355.555688] ata2.00: irq_stat 0x00000040, connection status changed
[38355.555690] ata2: SError: { PHYRdyChg CommWake DevExch }
[38355.555693] ata2.00: failed command: READ FPDMA QUEUED
[38355.555695] ata2.00: cmd 60/20:d8:78:b4:3a/00:00:12:00:00/40 tag 27 ncq
16384 in
res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x10
(ATA bus error)
[38355.555697] ata2.00: status: { DRDY }
[38355.555699] ata2: hard resetting link
[38356.282999] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[38356.284112] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[38356.284114] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[38356.284116] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[38356.284151] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by
device (Stat=0x51 Err=0x04)
[38356.286531] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[38356.286533] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK)
filtered out
[38356.286534] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION
OVERLAY) filtered out
[38356.286582] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by
device (Stat=0x51 Err=0x04)
[38356.288209] ata2.00: configured for UDMA/133
[38356.288219] ahci 0000:00:17.0: port does not support device sleep
[38356.288271] ata2: EH complete
---
ApportVersion: 2.20.1-0ubuntu2.5
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: tch 2160 F.... pulseaudio
CurrentDesktop: Unity
DistributionChannelDescriptor:
# This is a distribution channel descriptor
# For more information see
http://wiki.ubuntu.com/DistributionChannelDescriptor
canonical-oem-somerville-xenial-amd64-20160624-2
DistroRelease: Ubuntu 16.04
EcryptfsInUse: Yes
HibernationDevice: RESUME=UUID=3f002b46-6b2f-42e8-95cd-1b0bdec9eb71
InstallationDate: Installed on 2017-03-22 (18 days ago)
InstallationMedia: Ubuntu 16.04 "Xenial" - Build amd64 LIVE Binary
20160624-10:47
Lsusb:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 1bcf:2b95 Sunplus Innovation Technology Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
MachineType: Dell Inc. Precision 5520
Package: linux (not installed)
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-72-generic.efi.signed
root=UUID=e38db0de-7f52-4cab-839b-6bfb046d4665 ro acpi_rev_override quiet
splash vt.handoff=7
ProcVersionSignature: Ubuntu 4.4.0-72.93-generic 4.4.49
RelatedPackageVersions:
linux-restricted-modules-4.4.0-72-generic N/A
linux-backports-modules-4.4.0-72-generic N/A
linux-firmware 1.157.8
RfKill:
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
Tags: xenial
Uname: Linux 4.4.0-72-generic x86_64
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups: adm cdrom dip libvirtd lpadmin plugdev sambashare sudo
_MarkForUpload: True
dmi.bios.date: 01/18/2017
dmi.bios.vendor: Dell Inc.
dmi.bios.version: 1.1.3
dmi.board.name: 0GPNW9
dmi.board.vendor: Dell Inc.
dmi.board.version: A00
dmi.chassis.type: 10
dmi.chassis.vendor: Dell Inc.
dmi.modalias:
dmi:bvnDellInc.:bvr1.1.3:bd01/18/2017:svnDellInc.:pnPrecision5520:pvr:rvnDellInc.:rn0GPNW9:rvrA00:cvnDellInc.:ct10:cvr:
dmi.product.name: Precision 5520
dmi.sys.vendor: Dell Inc.
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1681313/+subscriptions
--
Mailing list: https://launchpad.net/~kernel-packages
Post to : [email protected]
Unsubscribe : https://launchpad.net/~kernel-packages
More help : https://help.launchpad.net/ListHelp
