I just got access to that Raspberry Pi 3 again. I saw that the expected fdt address now changed to 0x02008000 in the boot script.
In the config.txt, it was set as: # set extended DT area device_tree_address=0x100 device_tree_end=0x8000 So I changed it to: # set extended DT area device_tree_address=0x2008000 device_tree_end=0x200ff00 And voilà - it works. Even the MAC address is correct now. -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. https://bugs.launchpad.net/bugs/1652504 Title: Recent updates broke Ubuntu on Raspberry Pi 3 Status in flash-kernel package in Ubuntu: Confirmed Status in linux package in Ubuntu: Confirmed Bug description: Hello, I've been running Raspberry Pi 3 with Ubuntu as described here https://wiki.ubuntu.com/ARM/RaspberryPi I've installed Ubuntu 16.04 and then upgraded to 16.10 and have been using this setup successfully since October up until last week. Unfortunately one of the latest kernel updates broke the installation and I found out the same happened for Ubuntu 16.04 LTS - and therefore I can no longer run up-to-date Ubuntu installation (with updated kernel) on my RPI. I am getting this error: Error image is not a fdt - must reset the board to recover I also tried this but it didn't help me: https://www.raspberrypi.org/forums/viewtopic.php?f=28&t=168838 Now I know running Ubuntu on RPI3 this way is not officially supported, but since Ubuntu Snappy is supported I thought someone here could know what is going on. Thank you very much. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/flash-kernel/+bug/1652504/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
