** Changed in: linux-firmware (Ubuntu) Importance: Undecided => Medium
-- You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux-firmware in Ubuntu. https://bugs.launchpad.net/bugs/1625157 Title: QLogic qla2xxx firmware fails Status in linux-firmware package in Ubuntu: Incomplete Bug description: Im trying to user qla2xxx module with QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA (rev 02) on ubuntu 14.04 LTS and 16.04 LTS. Problem seems to be similar to https://bugs.launchpad.net/ubuntu/+source/linux-firmware/+bug/1117428 but I already have newest kernel and it happens on two version of ubuntu. I can just add that it works on CentOS/RHEL 7 /var/log/syslog snippet: qla2xxx [0000:0b:00.0]-d009:3: Firmware has been previously dumped (ffffc90000d81000) -- ignoring request. qla2xxx [0000:0b:00.0]-101e:3: Mailbox cmd timeout occurred, cmd=0x69, mb[0]=0x69. Scheduling ISP abort qla2xxx [0000:0b:00.0]-00af:3: Performing ISP error recovery - ha=ffff880035e00000. qla2xxx [0000:0b:00.0]-500a:3: LOOP UP detected (8 Gbps). qla2xxx [0000:0b:00.0]-803b:3: Firmware ready **** FAILED ****. qla2xxx [0000:0b:00.0]-d009:3: Firmware has been previously dumped (ffffc90000d81000) -- ignoring request. qla2xxx [0000:0b:00.0]-101e:3: Mailbox cmd timeout occurred, cmd=0x69, mb[0]=0x69. Scheduling ISP abort qla2xxx [0000:0b:00.0]-00af:3: Performing ISP error recovery - ha=ffff880035e00000. qla2xxx [0000:0b:00.0]-500a:3: LOOP UP detected (8 Gbps). # systool -c fc_host -v Class = "fc_host" Class Device = "host3" Class Device path = "/sys/devices/pci0000:00/0000:00:16.0/0000:0b:00.0/host3/fc_host/host3" dev_loss_tmo = "30" fabric_name = "0xffffffffffffffff" issue_lip = <store method only> max_npiv_vports = "254" node_name = "0x20000024ff778622" npiv_vports_inuse = "0" port_id = "0x000000" port_name = "0x21000024ff778622" port_state = "Linkdown" port_type = "Unknown" speed = "unknown" supported_classes = "Class 3" supported_speeds = "1 Gbit, 2 Gbit, 4 Gbit, 8 Gbit" symbolic_name = "QLE2562 FW:v8.03.00 DVR:v8.07.00.26-k" system_hostname = "" tgtid_bind_type = "wwpn (World Wide Port Name)" uevent = vport_create = <store method only> vport_delete = <store method only> Device = "host3" Device path = "/sys/devices/pci0000:00/0000:00:16.0/0000:0b:00.0/host3" fw_dump = issue_logo = <store method only> nvram = "ISP " optrom_ctl = <store method only> optrom = reset = <store method only> uevent = "DEVTYPE=scsi_host" vpd = "▒(" (here it hangs for a while and reports some errors, already posted above) lspci -v 0b:00.0 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA (rev 02) Subsystem: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA Physical Slot: 192 Flags: bus master, fast devsel, latency 64, IRQ 19 I/O ports at 5000 [size=256] Memory at fd4fc000 (64-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 3 Capabilities: [4c] Express Endpoint, MSI 00 Capabilities: [88] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [98] Vital Product Data Capabilities: [a0] MSI-X: Enable+ Count=2 Masked- Capabilities: [100] Advanced Error Reporting Capabilities: [138] Power Budgeting <?> Kernel driver in use: qla2xxx Kernel modules: qla2xxx To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-firmware/+bug/1625157/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
