You have been subscribed to a public bug: == Comment: #0 - Naresh Bannoth - 2016-07-01 02:07:26 == ---Problem Description--- executing Dlpar add/remove adapter operation on Halfsail card in ubuntu14.04.5. on executing these command for 5-10 times, the kernel getting crashed.
Syslog messages while crashing ---------------------------------------- [52469.743034] Unable to handle kernel paging request for instruction fetch [52469.743045] Faulting instruction address: 0x552f73746f6c732c [52469.743051] Oops: Kernel access of bad area, sig: 11 [#1] [52469.743055] SMP NR_CPUS=2048 NUMA pSeries [52469.743061] Modules linked in: rpadlpar_io rpaphp dm_round_robin pseries_rng rtc_generic dm_multipath qla2xxx ibmvscsi ibmveth scsi_transport_fc [52469.743079] CPU: 10 PID: 1954 Comm: multipathd Not tainted 4.4.0-29-generic #48~14.04.1-Ubuntu [52469.743086] task: c0000003f9f42a20 ti: c0000003f22d4000 task.ti: c0000003f22d4000 [52469.743091] NIP: 552f73746f6c732c LR: c00000000004803c CTR: 552f73746f6c732f [52469.743097] REGS: c0000003f22d6d60 TRAP: 0400 Not tainted (4.4.0-29-generic) [52469.743101] MSR: 8000000140009033 <SF,EE,ME,IR,DR,RI,LE> CR: 28008424 XER: 20000010 [52469.743116] CFAR: c000000000008468 SOFTE: 1 GPR00: c000000000048018 c0000003f22d6fe0 c000000001598f00 c000000006e6c000 GPR04: 0000000000000001 0000000000000000 000000000000de0b c000000000f7fdc8 GPR08: 00000003fe920000 552f73746f6c732f 0000000000000000 c000000006121e40 GPR12: 552f73746f6c732f c000000007af5f00 00003fff8f00eea8 00003fff8f00eea8 GPR16: 00003fff8f00eea8 00003fff8f00eea8 00003fff8f00eea8 0000000000000001 GPR20: 0000000000000000 0000000000000083 00003fff8eeb04cc 00003fff8f023810 GPR24: 000000000000004e c0000000062dfc28 c0000003f2c24000 0000000000000100 GPR28: c0000000015050e0 c000000005018e80 c0000003f3282c00 c000000006e6c000 [52469.743181] NIP [552f73746f6c732c] 0x552f73746f6c732c [52469.743188] LR [c00000000004803c] pcibios_release_device+0x5c/0x80 [52469.743192] Call Trace: [52469.743196] [c0000003f22d6fe0] [c000000000048018] pcibios_release_device+0x38/0x80 (unreliable) [52469.743205] [c0000003f22d7010] [c0000000005c15f4] pci_release_dev+0x84/0xd0 [52469.743212] [c0000003f22d7040] [c0000000006b2390] device_release+0x60/0xf0 [52469.743219] [c0000003f22d70c0] [c00000000056bd14] kobject_cleanup+0xd4/0x240 [52469.743226] [c0000003f22d7140] [c0000000006b2b24] put_device+0x34/0x50 [52469.743232] [c0000003f22d7170] [c00000000073c034] scsi_host_dev_release+0x124/0x1a0 [52469.743239] [c0000003f22d71b0] [c0000000006b2390] device_release+0x60/0xf0 [52469.743246] [c0000003f22d7230] [c00000000056bd14] kobject_cleanup+0xd4/0x240 [52469.743253] [c0000003f22d72b0] [c0000000006b2b24] put_device+0x34/0x50 [52469.743265] [c0000003f22d72e0] [d0000000023d097c] fc_rport_dev_release+0x2c/0x50 [scsi_transport_fc] [52469.743275] [c0000003f22d7310] [c0000000006b2390] device_release+0x60/0xf0 [52469.743283] [c0000003f22d7390] [c00000000056bd14] kobject_cleanup+0xd4/0x240 [52469.743292] [c0000003f22d7410] [c0000000006b2b24] put_device+0x34/0x50 [52469.743301] [c0000003f22d7440] [c000000000748a50] scsi_target_dev_release+0x40/0x60 [52469.743309] [c0000003f22d7470] [c0000000006b2390] device_release+0x60/0xf0 [52469.743317] [c0000003f22d74f0] [c00000000056bd14] kobject_cleanup+0xd4/0x240 [52469.743324] [c0000003f22d7570] [c0000000006b2b24] put_device+0x34/0x50 [52469.743332] [c0000003f22d75a0] [c00000000074d3e8] scsi_device_dev_release_usercontext+0x178/0x1b0 [52469.743341] [c0000003f22d7600] [c0000000000da4f4] execute_in_process_context+0xa4/0xd0 [52469.743349] [c0000003f22d7630] [c00000000074d254] scsi_device_dev_release+0x34/0x50 [52469.743357] [c0000003f22d7660] [c0000000006b2390] device_release+0x60/0xf0 [52469.743364] [c0000003f22d76e0] [c00000000056bd14] kobject_cleanup+0xd4/0x240 [52469.743371] [c0000003f22d7760] [c0000000006b2b24] put_device+0x34/0x50 [52469.743379] [c0000003f22d7790] [c0000000007399e0] scsi_device_put+0x40/0x60 [52469.743386] [c0000003f22d77c0] [c00000000075b528] scsi_disk_put+0x58/0x90 [52469.743394] [c0000003f22d7800] [c0000000003282c8] __blkdev_put+0x348/0x3d0 [52469.743402] [c0000003f22d78f0] [c0000000008cbc1c] dm_put_table_device+0xcc/0x130 [52469.743410] [c0000003f22d7930] [c0000000008d09b0] dm_put_device+0xa0/0x130 [52469.743418] [c0000003f22d79b0] [d000000004a41830] free_priority_group+0xb0/0x110 [dm_multipath] [52469.743427] [c0000003f22d7a10] [d000000004a41914] free_multipath+0x84/0xf0 [dm_multipath] [52469.743436] [c0000003f22d7a60] [c0000000008d1b30] dm_table_destroy+0xb0/0x1a0 [52469.743443] [c0000003f22d7af0] [c0000000008d711c] dev_suspend+0x14c/0x330 [52469.743449] [c0000003f22d7b30] [c0000000008d7fec] ctl_ioctl+0x1cc/0x380 [52469.743456] [c0000003f22d7d10] [c0000000008d81d8] dm_ctl_ioctl+0x38/0x50 [52469.743464] [c0000003f22d7d40] [c0000000002ec710] do_vfs_ioctl+0x4d0/0x7e0 [52469.743472] [c0000003f22d7de0] [c0000000002ecaf4] SyS_ioctl+0xd4/0xf0 [52469.743480] [c0000003f22d7e30] [c000000000009204] system_call+0x38/0xb4 [52469.743486] Instruction dump: [52469.743490] XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX [52469.743501] XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX [52469.743516] ---[ end trace 93e18aa68a2c9922 ]--- [52469.747068] [52469.747074] Sending IPI to other CPUs [52469.748095] IPI complete I'm in purgatory ---uname output--- Linux ubuntu 4.4.0-29-generic #48~14.04.1-Ubuntu SMP Wed Jun 29 19:55:03 UTC 2016 ppc64le ppc64le ppc64le GNU/Linux Machine Type = 8284-22A ---Steps to Reproduce--- 1. Install all required rsct packages for dlpar operation 2. make sure that the adapter is added as Desired in HMC 3. Activate the Dlpar services using "starsrc -g rsct" and "starsrc -g rsct_rm" 4. Make sure that thedlpar service are active using lssrc -a root@ubuntu:~# lssrc -a Subsystem Group PID Status ctrmc rsct 1558 active IBM.DRM rsct_rm 1720 active IBM.MgmtDomainRM rsct_rm 1785 active IBM.ServiceRM rsct_rm 1796 active IBM.HostRM rsct_rm 1855 active ctcas rsct 2918 active IBM.ERRM rsct_rm 2926 active IBM.AuditRM rsct_rm 2927 active IBM.SensorRM rsct_rm 2928 active root@ubuntu:~# Now start executing the Dlpar commands as follows, 1. List the adapter present in the lpar and note down the lpar_id and drc_index of the adapter on which you want to execute Dlpar operations, lshwres -r io -m server-name --rsubtype slot --filter "lpar_names=lparname" eg: lshwres -r io -m tuletapio2-fsp --rsubtype slot --filter "lpar_names=tuletapio2-lp5Naresh-ubuntu16.04.1" output: -------- unit_phys_loc=U78CB.001.WZS00E2,bus_id=29,phys_loc=C9,drc_index=2103001D,lpar_name=tuletapio2-lp5Naresh-ubuntu16.04.1,lpar_id=8,slot_io_pool_id=none,description=Fibre Channel Serial Bus,feature_codes=none,pci_vendor_id=1077,pci_device_id=2532,pci_subs_vendor_id=1014,pci_subs_device_id=F304,pci_class=0C04,pci_revision_id=02,bus_grouping=0,iop=0,parent_slot_drc_index=none,drc_name=U78CB.001.WZS00E2C9,interposer_present=0,interposer_pcie=0,lpar_assignment_capable=1,dynamic_lpar_assignment_capable=1 Remove command: ----------------------- chhwres -r io -m tuletapio2-fsp -o r --id lpar_id -l drc_index eg: chhwres -r io -m tuletapio2-fsp -o r --id 8 -l 2103001D Add command ------------------- chhwres -r io -m tuletapio2-fsp -o a --id lpar_id -l drc_index eg: chhwres -r io -m tuletapio2-fsp -o a --id 8 -l 2103001D Userspace tool common name: DLPAR(rsct) == Comment: #12 - Mauricio Faria De Oliveira - 2016-09-08 12:19:56 == Hi Canonical, Can you please apply this patch in 16.04.x and latest 14.04.x HWE? It is accepted in linux-4.8-rc5 [1]. Thanks, [1] 2016-08-22 "powerpc/pseries: use pci_host_bridge.release_fn() to kfree(phb)" https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/log/arch/powerpc/kernel/pci-common.c?id=refs/tags/v4.8-rc5 ** Affects: linux (Ubuntu) Importance: Undecided Assignee: Taco Screen team (taco-screen-team) Status: New ** Tags: architecture-ppc64le bugnameltc-143294 severity-critical targetmilestone-inin14045 -- Kernel getting crashed on DLPAR add/remove commands for halfsail on ubuntu14.04.5 https://bugs.launchpad.net/bugs/1621544 You received this bug notification because you are a member of Kernel Packages, which is subscribed to linux in Ubuntu. -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
