Hallo Thomas Many thanks for the workaround. I can confirm it works.
Would you know if any plans exist to fix this in a future version of udisks? On Fre, 2013-08-02 at 07:35 +0000, Thomas Forgber wrote: > Sry for the late repley - just found this! > One simple workaround is to manually downgrade the udisks2 package: > > HOW TO: > > Download an older version of the package eg here: > www.ubuntuupdates.org/package/core/quantal/main/base/udisks2 > > go to folder which includes the package an type: > > sudo dpkg -i package.deb > > Now check the Version again with: > > sudo apt-cache showpkg udisks2 > > It should show you the downloaded version number now + some dependences (like > this) > Provides: > 2.1.0-2 - udisks2:i386 > 2.0.0-1 - udisks2:i386 > Reverse Provides: > udisks2:i386 2.1.0-2 > > Now you have to lock the version in order to not update it automatically > while apt-get update is running either with synaptic or console: > > Synaptic: > search for udisks2 - it should show you again the downloaded version, mark > it, and select lock version under package > > console: > sudo echo “package hold” | sudo dpkg –set-selections > > If all is done reboot, test it and run > > sudo apt-get update > > to check if it gets updated or not. > > Hope that works for you guys! > -- Robert -- You received this bug notification because you are a member of Kernel Packages, which is subscribed to libatasmart in Ubuntu. https://bugs.launchpad.net/bugs/1161985 Title: Error sending ATA command IDENTIFY DEVICE Status in ATA S.M.A.R.T. Disk Health Monitoring Library: Confirmed Status in “libatasmart” package in Ubuntu: Confirmed Status in “udisks2” package in Ubuntu: New Bug description: I'm not able to mount my external HDD using Xubuntu 13.04 (udisks2), not even while booting into a live medium. However, Windows 7 and Ubuntu 12.04.2 (udisks) are able to mount the device without problem. Syslog is showing following entries: Mar 29 19:19:41 local kernel: [ 46.012101] usb 2-2: new high-speed USB device number 5 using ehci-pci Mar 29 19:19:41 local kernel: [ 46.145401] usb 2-2: New USB device found, idVendor=14cd, idProduct=6116 Mar 29 19:19:41 local kernel: [ 46.145409] usb 2-2: New USB device strings: Mfr=1, Product=3, SerialNumber=2 Mar 29 19:19:41 local kernel: [ 46.145412] usb 2-2: Product: USB 2.0 SATA BRIDGE Mar 29 19:19:41 local kernel: [ 46.145416] usb 2-2: Manufacturer: Super Top Mar 29 19:19:41 local kernel: [ 46.145419] usb 2-2: SerialNumber: M6116018VE15 Mar 29 19:19:41 local kernel: [ 46.153488] Initializing USB Mass Storage driver... Mar 29 19:19:41 local kernel: [ 46.153614] usbcore: registered new interface driver usb-storage Mar 29 19:19:41 local kernel: [ 46.153617] USB Mass Storage support registered. Mar 29 19:19:41 local kernel: [ 46.157283] scsi6 : usb-storage 2-2:1.0 Mar 29 19:19:41 local kernel: [ 46.157457] usbcore: registered new interface driver ums-cypress Mar 29 19:19:42 local kernel: [ 47.156812] scsi 6:0:0:0: Direct-Access WDC WD32 00BEVT-22ZCT0 PQ: 0 ANSI: 0 Mar 29 19:19:42 local kernel: [ 47.157700] sd 6:0:0:0: Attached scsi generic sg2 type 0 Mar 29 19:19:42 local kernel: [ 47.159898] sd 6:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) Mar 29 19:19:42 local kernel: [ 47.160903] sd 6:0:0:0: [sdb] Write Protect is off Mar 29 19:19:42 local kernel: [ 47.160909] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00 Mar 29 19:19:42 local kernel: [ 47.161741] sd 6:0:0:0: [sdb] No Caching mode page present Mar 29 19:19:42 local kernel: [ 47.161748] sd 6:0:0:0: [sdb] Assuming drive cache: write through Mar 29 19:19:42 local kernel: [ 47.165016] sd 6:0:0:0: [sdb] No Caching mode page present Mar 29 19:19:42 local kernel: [ 47.165023] sd 6:0:0:0: [sdb] Assuming drive cache: write through Mar 29 19:19:42 local kernel: [ 47.206914] sdb: sdb1 sdb2 Mar 29 19:19:42 local kernel: [ 47.209109] sd 6:0:0:0: [sdb] No Caching mode page present Mar 29 19:19:42 local kernel: [ 47.209115] sd 6:0:0:0: [sdb] Assuming drive cache: write through Mar 29 19:19:42 local kernel: [ 47.209120] sd 6:0:0:0: [sdb] Attached SCSI disk Mar 29 19:19:50 local kernel: [ 54.928067] usb 2-2: reset high-speed USB device number 5 using ehci-pci Mar 29 19:19:50 local udisksd[1881]: Error probing device: Error sending ATA command IDENTIFY DEVICE to /dev/sdb: Unexpected sense data returned:#0120000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................#0120010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................#012 (g-io-error-quark, 0) thad@local:~$ apt-cache policy udisks2 udisks2: Installed: 2.1.0-2 Candidate: 2.1.0-2 Version table: *** 2.1.0-2 0 500 http://archive.ubuntu.com/ubuntu/ raring/main amd64 Packages 100 /var/lib/dpkg/status To manage notifications about this bug go to: https://bugs.launchpad.net/libatasmart/+bug/1161985/+subscriptions -- Mailing list: https://launchpad.net/~kernel-packages Post to : kernel-packages@lists.launchpad.net Unsubscribe : https://launchpad.net/~kernel-packages More help : https://help.launchpad.net/ListHelp
