Git commit a5fcf4bd3d45c2eaf9d2489481cc1229ccd1e669 by Gilles Caulier.
Committed on 18/09/2016 at 15:44.
Pushed by cgilles into branch 'master'.
digiKam 5.x huge handbook split stage
-------------------------------------
Cut "Using Mainwindow" chapter as small sub section files.
This commit complete the split stage of English manual.
Now digiKam handbook can be translated for a while and translators can work
safety during whole 5.x serie.
Notes :
- Remember that some sections need to be documented and are annotated with
TODO keyword. All contributions are welcome.
- Proof-read are welcome to check English words and docbook syntax
everywhere.
Thanks in advance
CCMAIL: [email protected]
CCMAIL: [email protected]
M +10 -0 digikam/index.docbook
M +3 -3 digikam/intro-firstrun.docbook
M +1 -1 digikam/using-camera-basis.docbook
A +132 -0 digikam/using-mainwindow-albumsview.docbook
A +30 -0 digikam/using-mainwindow-datesview.docbook
A +56 -0 digikam/using-mainwindow-fuzzysearches.docbook
A +184 -0 digikam/using-mainwindow-imageview.docbook
A +102 -0 digikam/using-mainwindow-intro.docbook
A +31 -0 digikam/using-mainwindow-labelsview.docbook
A +114 -0 digikam/using-mainwindow-peopleview.docbook
A +113 -0 digikam/using-mainwindow-searchesview.docbook
A +151 -0 digikam/using-mainwindow-tagsview.docbook
A +28 -0 digikam/using-mainwindow-timelineview.docbook
M +10 -857 digikam/using-mainwindow.docbook
M +1 -1 digikam/using-setup-collections.docbook
http://commits.kde.org/digikam-doc/a5fcf4bd3d45c2eaf9d2489481cc1229ccd1e669
diff --git a/digikam/index.docbook b/digikam/index.docbook
index 5a2eaf9..8e28728 100644
--- a/digikam/index.docbook
+++ b/digikam/index.docbook
@@ -23,6 +23,16 @@
<!-- Using Application Chapter -->
<!ENTITY doc-using-mainwindow SYSTEM
"using-mainwindow.docbook">
+ <!ENTITY doc-using-mainwindow-intro SYSTEM
"using-mainwindow-intro.docbook">
+ <!ENTITY doc-using-mainwindow-imageview SYSTEM
"using-mainwindow-imageview.docbook">
+ <!ENTITY doc-using-mainwindow-albumsview SYSTEM
"using-mainwindow-albumsview.docbook">
+ <!ENTITY doc-using-mainwindow-tagsview SYSTEM
"using-mainwindow-tagsview.docbook">
+ <!ENTITY doc-using-mainwindow-labelsview SYSTEM
"using-mainwindow-labelsview.docbook">
+ <!ENTITY doc-using-mainwindow-datesview SYSTEM
"using-mainwindow-datesview.docbook">
+ <!ENTITY doc-using-mainwindow-timelineview SYSTEM
"using-mainwindow-timelineview.docbook">
+ <!ENTITY doc-using-mainwindow-searchesview SYSTEM
"using-mainwindow-searchesview.docbook">
+ <!ENTITY doc-using-mainwindow-fuzzysearches SYSTEM
"using-mainwindow-fuzzysearches.docbook">
+ <!ENTITY doc-using-mainwindow-peopleview SYSTEM
"using-mainwindow-peopleview.docbook">
<!ENTITY doc-using-sidebar SYSTEM
"using-sidebar.docbook">
<!ENTITY doc-using-sidebar-intro SYSTEM
"using-sidebar-intro.docbook">
diff --git a/digikam/intro-firstrun.docbook b/digikam/intro-firstrun.docbook
index 5f7ec86..2d494ba 100644
--- a/digikam/intro-firstrun.docbook
+++ b/digikam/intro-firstrun.docbook
@@ -129,15 +129,15 @@
</para>
<para>
- When you use an existing folder of photographs, as the Album
Library folder, you will notice that the Albums in the Album list do not have
photographs as their icons. You can change that by dragging any photograph in
the Album onto the folder icon in the left sidebar and use this as the Album
icon. See the <link linkend="using-myalbumsview">Album</link> section for
details of how to change the Album icon.
+ When you use an existing folder of photographs, as the Album
Library folder, you will notice that the Albums in the Album list do not have
photographs as their icons. You can change that by dragging any photograph in
the Album onto the folder icon in the left sidebar and use this as the Album
icon. See the <link linkend="using-mainwindow-albumsview">Album</link> section
for details of how to change the Album icon.
</para>
<para>
- &digikam; uses a dedicated database to store thumbnails with
an optimized wavelets compression algorithm (PGF) thumbnail folders. There is
no way of hiding non-standard thumbnail folders from the <quote>Albums</quote>
list. If you want to keep them you could create an Album Category that just
contains all the thumbnail Folders and then view your Albums in
<menuchoice><guimenu>View</guimenu><guimenuitem>Sort
Albums</guimenuitem><guimenuitem>By Category</guimenuitem></menuchoice> order.
See the <link linkend="using-myalbumsview">Album</link> section for more about
Album Categories.
+ &digikam; uses a dedicated database to store thumbnails with
an optimized wavelets compression algorithm (PGF) thumbnail folders. There is
no way of hiding non-standard thumbnail folders from the <quote>Albums</quote>
list. If you want to keep them you could create an Album Category that just
contains all the thumbnail Folders and then view your Albums in
<menuchoice><guimenu>View</guimenu><guimenuitem>Sort
Albums</guimenuitem><guimenuitem>By Category</guimenuitem></menuchoice> order.
See the <link linkend="using-mainwindow-albumsview">Album</link> section for
more about Album Categories.
</para>
<para>
- Once you have configured the Album Library Folder you can set
up &digikam; to work with your digital camera and then learn how to use <link
linkend="using-myalbumsview">Albums</link> and <link
linkend="using-mytagsview">Tags</link> to arrange your photograph Albums.
+ Once you have configured the Album Library Folder you can set
up &digikam; to work with your digital camera and then learn how to use <link
linkend="using-mainwindow-albumsview">Albums</link> and <link
linkend="using-mainwindow-tagsview">Tags</link> to arrange your photograph
Albums.
</para>
</sect3>
diff --git a/digikam/using-camera-basis.docbook
b/digikam/using-camera-basis.docbook
index 84c46e8..27b5b1c 100644
--- a/digikam/using-camera-basis.docbook
+++ b/digikam/using-camera-basis.docbook
@@ -36,7 +36,7 @@
<anchor id="targetalbumdialog.anchor"/>
<para>
- Using <guilabel>Download All</guilabel> or <guilabel>Download
Selected</guilabel> buttons will bring up a dialog, that allows you to select a
target Album into which the photographs will be downloaded. The list of
existing Albums is displayed, ordered by the Folder method (see the <link
linkend="using-myalbumsview">Albums View</link> for details of Album ordering).
You can select the target Album from this list and then click OK.
+ Using <guilabel>Download All</guilabel> or <guilabel>Download
Selected</guilabel> buttons will bring up a dialog, that allows you to select a
target Album into which the photographs will be downloaded. The list of
existing Albums is displayed, ordered by the Folder method (see the <link
linkend="using-mainwindow-albumsview">Albums View</link> for details of Album
ordering). You can select the target Album from this list and then click OK.
</para>
<example>
diff --git a/digikam/using-mainwindow-albumsview.docbook
b/digikam/using-mainwindow-albumsview.docbook
new file mode 100644
index 0000000..6cda314
--- /dev/null
+++ b/digikam/using-mainwindow-albumsview.docbook
@@ -0,0 +1,132 @@
+<sect2 id="using-mainwindow-albumsview">
+<title>Albums View</title>
+
+ <para>
+ <mediaobject>
+ <imageobject><imagedata
fileref="&path;using-mainwindow-albumview.png" format="PNG" /></imageobject>
+ </mediaobject>
+ </para>
+
+ <para>
+ By clicking the <quote>Albums</quote> button on the left side bar you
toggle the <quote>Albums</quote> tree which provides an organized view of your
photograph albums. The top item <quote>Albums</quote> just shows the
<quote>welcome to &digikam;</quote> screen in the view area. The next level of
the <quote>Albums</quote> tree shows your different Collections (marked by the
<inlinemediaobject><imageobject><imagedata
fileref="&path;using-mainwindow-icon-collection.png" format="PNG"
/></imageobject></inlinemediaobject> icon) or at least one if you haven't added
one or more yet in the <menuchoice><guimenu>Settings</guimenu>
<guimenuitem>Configure &digikam;...</guimenuitem></menuchoice> Collections
section. Each Collection represents a folder branch on your hard disk, on
removable media or on network shares and the next levels in the tree show the
structure of those folders, here called <quote>Albums</quote>. The albums can
be sorted by their folder layout on the hard disk, by the Category that has
been set in the <link linkend="albumpropsedit.anchor">Album Properties</link>
or by the Date of that Albums (this date can also be changed in the Properties
of each Album). You can invert the sort order (ascending/descending) by
clicking on the title bar of the album tree.
+ </para>
+
+ <para>
+ You can switch between these sort orders using <guimenuitem>Sort
Albums</guimenuitem> from the <guimenu>View</guimenu> menu.
+ </para>
+
+ <sect3 id="using-createnewalbum">
+ <title>Creating a New Album</title>
+
+ <para>
+ There are a number of ways to create a new Album. You can create a
new Album when you upload new photographs from the Camera using
<menuchoice><guimenu>Import</guimenu>
<guimenuitem>Cameras</guimenuitem></menuchoice>. You can also create a new
empty Album with <menuchoice><guimenu>Album</guimenu>
<guimenuitem>New...</guimenuitem></menuchoice> (Ctrl+N) in the
<quote>Albums</quote> view. As an additional option, you can create a new Album
by importing an existing folder of photographs from your computer; just select
<menuchoice><guimenu>Import</guimenu> <guimenuitem>Add
Folders...</guimenuitem></menuchoice> from the menu bar and select the folder
that you want to import. An Album will be created with the same name as the
hard disk folder. You can use drag and drop to import a folder. Drag a folder
icon, for example from a &konqueror; window. Then drop it on the album list on
the left. A menu will appear that gives you the option to move or copy the
folder into &digikam;.
+ </para>
+
+ </sect3>
+
+ <sect3 id="using-deletealbum">
+ <title>Deleting an Album</title>
+
+ <para>
+ When you delete an Album from &digikam; it will be moved into the
internal Trash Can. As an option you could change this behavior, so that delete
really will remove the Album and all of the photographs in it. This can be
changed by selecting
<menuchoice><guimenu>Settings</guimenu><guimenuitem>Configure
&digikam;</guimenuitem></menuchoice> and selecting the Miscellaneous page. At
the top of this page are the settings that control what happens when a
photograph is deleted. To delete an Album right-click the Album in the
<quote>Albums</quote> tree and select Delete Album from the context menu.
+ </para>
+
+ </sect3>
+
+ <sect3 id="using-addphototoalbum">
+ <title>Adding a Photograph to an Album</title>
+
+ <para>
+ Most of the time you will create new Albums and populate them with
photographs directly from your camera using the Camera Tool. However, sometimes
you may want to add a photograph that you already have on your computer to an
existing Album. To add a photograph to an Album select
<menuchoice><guimenu>Import</guimenu> <guimenuitem>Add
Images...</guimenuitem></menuchoice> (Ctrl+Alt+I) from the menu bar. Select a
source folder from the dialog and click OK. An import window will open. Select
the photographs that you want to add and choose <guilabel>Download
Selected</guilabel> from the <quote>Download</quote> drop down menu. A dialog
will open where you can choose the destination album. The photographs will be
copied into the Album. <guilabel>Download New</guilabel> (Ctrl+N) from the same
menu will copy only those images which are not in the destination folder yet.
+ </para>
+
+ <para>
+ Additionally, you can use drag and drop to import photographs.
Drag the photographs icons, for example from a &dolphin; window. Then drop it
on the image list on the right hand side.
+ </para>
+
+ <para>
+ If you have a scanner configured, you can also scan a photograph
straight into an Album. Select
+ <menuchoice><guimenu>Import</guimenu>
+ <guimenuitem>Import from Scanner...</guimenuitem></menuchoice>.
+ </para>
+
+ </sect3>
+
+ <sect3 id="using-movecopyitem">
+ <title>Moving or Copying Photographs Between Albums</title>
+
+ <para>
+ Simply drag the photograph and drop it on the destination Album to
move or copy it from one Album to another. A menu will appear that gives you
the option to <guilabel>Move</guilabel> or <guilabel>Copy</guilabel> the
photograph. You can move or copy multiple photographs the same way, just select
all the photographs that you want to move and drag them on to the destination
Album.
+ </para>
+
+ </sect3>
+
+ <sect3 id="using-managealbums">
+ <title>Managing Albums</title>
+
+ <anchor id="albumpropsedit.anchor"/>
+
+ <para>
+ Album Properties can help you remember which kind of photographs
are in an Album and can also help you to organize the <quote>Albums</quote>
tree. To access the Album Properties right-click on an Album and select
<guilabel>Properties</guilabel> (Alt+Return) from the context menu.
+ </para>
+
+ <para>The Album Properties dialog allows you to set:</para>
+
+ <example>
+ <title>The Album Properties Dialog</title>
+ <screenshot><mediaobject><imageobject><imagedata
fileref="&path;using-mainwindow-albumproperties.png" format="PNG" />
</imageobject></mediaobject></screenshot>
+ </example>
+
+ <itemizedlist>
+
+ <listitem><para>The Album <guilabel>Title</guilabel> : Name of the
Album, identical with the name of the folder on your hard disk. If you edit it
here, the folder will also be renamed.
+ </para></listitem>
+
+ <listitem><para>The Album <guilabel>Category</guilabel> : this is
a way of grouping your Albums together by a common label. The Category you set
will be used to order your albums when you select <guilabel>By
Category</guilabel> from the drop down box in the tool bar or using
<menuchoice><guimenu>View</guimenu><guimenuitem>Sort
Albums</guimenuitem><guimenuitem>By Category</guimenuitem></menuchoice>. If you
want to add and delete Category labels, choose from the menu
<menuchoice><guimenu>Settings</guimenu><guimenuitem>Configure
&digikam;</guimenuitem></menuchoice> and here the Album Category section.
+ </para></listitem>
+
+ <listitem><para>The <guilabel>Caption</guilabel> for the Album :
Usually a short description of the content, but of course you are free to abuse
it in any conceivable way. But beware: this will be shown in the banner at the
top of the main Image Window ;-)
+ </para></listitem>
+
+ <listitem><para>The Album <guilabel>Date</guilabel> : this will be
used when you order your Albums by date using
<menuchoice><guimenu>View</guimenu><guimenuitem>Sort
Albums</guimenuitem><guimenuitem>By Date</guimenuitem></menuchoice>.
+ </para></listitem>
+
+ <listitem><para><guilabel>Oldest, Average, Newest</guilabel>
buttons : these will set the <guilabel>Date</guilabel> to the oldest, average
or latest date of the images in that album. It will first try to calculate the
average date of the images in the album based on the EXIF-headers. If that
fails it will fall back to the modification date of the files in that folder.
+ </para></listitem>
+
+ </itemizedlist>
+
+ </sect3>
+
+ <sect3 id="using-setalbumicon">
+ <title>Setting the Album Icon</title>
+
+ <para>
+ &digikam; displays the usual folder icon in the
<quote>Albums</quote> list. You can choose one of your photographs instead.
This may help you to remember what kind of photographs are contained in an
Album.
+ </para>
+
+ <para>
+ To select a photograph as the Album icon, right-click on the
photograph that you want to use as the Album icon and select <guimenuitem>Set
as Album Thumbnail</guimenuitem> from the context menu. Additionally you can
use drag and drop to set the Album icon. Drag the photographs icon from the
thumbnail area and drop it on the currently selected Album in the Album list.
+ </para>
+
+ <note>
+ <para>
+ An Album can only be in one Album Collection and Album
Collections cannot be nested.
+ </para>
+
+ <para>
+ &digikam; also supports tagging individual photographs. Album
Categories are different from photograph tagging because the Album Category
applies to all the photographs in an Album rather than to individual
photographs. You can use both Album Category and tagging to organize your
photographs.
+ </para>
+ </note>
+
+ </sect3>
+
+</sect2>
+
+<!--
+Local Variables:
+mode: sgml
+sgml-omittag: nil
+sgml-shorttag: t
+End:
+-->
diff --git a/digikam/using-mainwindow-datesview.docbook
b/digikam/using-mainwindow-datesview.docbook
new file mode 100644
index 0000000..4f059f5
--- /dev/null
+++ b/digikam/using-mainwindow-datesview.docbook
@@ -0,0 +1,30 @@
+<sect2 id="using-mainwindow-datesview">
+ <title>Dates View</title>
+
+ <para>
+ <mediaobject>
+ <imageobject>
+ <imagedata fileref="&path;using-mainwindow-dateview.png"
format="PNG" />
+ </imageobject>
+ </mediaobject>
+ </para>
+
+ <para>
+ The Dates View organizes your photographs based on their dates.
&digikam; uses either the
+ EXIF date or, if no EXIF date is available, the last modification time
of the file.
+ </para>
+
+ <para>
+ When you select a month from the list, all images from that month are
displayed in the Image Area.
+ You can select days or weeks in the date sheet at the bottom of the
Left Sidebar to show only the images from the selected dates.
+ </para>
+
+</sect2>
+
+<!--
+Local Variables:
+mode: sgml
+sgml-omittag: nil
+sgml-shorttag: t
+End:
+-->
diff --git a/digikam/using-mainwindow-fuzzysearches.docbook
b/digikam/using-mainwindow-fuzzysearches.docbook
new file mode 100644
index 0000000..b4f5383
--- /dev/null
+++ b/digikam/using-mainwindow-fuzzysearches.docbook
@@ -0,0 +1,56 @@
+<sect2 id="using-mainwindow-fuzzysearches">
+ <title>Fuzzy View</title>
+
+ <para>
+ &digikam; characterizes every image by a lengthy number using a
special technique (Haar algorithm) that makes it possible to compare images by
comparing this calculated signature. The less numerical difference there is
between any two image signatures, the more they resemble each other. This
technique has three implementations in &digikam;:
+ </para>
+
+ <itemizedlist>
+
+ <listitem>
+ <para>
+ Duplicates: before you can have &digikam; finding duplicates
the signatures (or fingerprints) have to be calculated. You can start that
process with the button <guilabel>Update fingerprints</guilabel> which
initiates a total rebuild of the image signatures (may take hours if you have a
large collection, an estimate is 2 hours for 10'000 images). Once the
fingerprints are calculated you can use <guilabel>Find duplicates</guilabel>,
but it will take a long time too as it has to compare every image with any
other image. So the way to go in both cases is to confine your search to
certain albums and/or tags. With the Similarity threshold you can narrow down
or enlarge the search result.
+ </para>
+
+ <example>
+ <title>Find duplicates while restricting to an album</title>
+ <mediaobject>
+ <imageobject><imagedata
fileref="&path;using-mainwindow-duplicates-albumsfilter.png" format="PNG"
/></imageobject>
+ </mediaobject>
+ </example>
+ </listitem>
+
+ <listitem>
+ <para>
+ Image (Similar items): This is a drag&drop zone where you
can drop any image to find a similar one. Drag an image from anywhere over the
fuzzy search icon in the left sidebar, it will open and you drop it there or
use <guilabel>Find Similar...</guilabel> from the context menu of a thumbnail
in any other view. You can narrow down or enlarge the resulting selection with
a threshold here as well. In the field below you can enter a name for the
search and save it. In the searches list below you find your saved searches.
Clicking on the title bar of that list toggles the sorting order between
ascending and descending. At the bottom you find an adaptive search field which
can help you to find a particular search.
+ </para>
+
+ <example>
+ <title>Fuzzy search for similar image</title>
+ <mediaobject><imageobject><imagedata
fileref="&path;using-mainwindow-searchsimilar.png" format="PNG"
/></imageobject></mediaobject>
+ </example>
+ </listitem>
+
+ <listitem>
+ <para>
+ Sketch: free hand color sketching: draw a quick sketch and
&digikam; will find corresponding images. You will find the same means to save
your search as in the <guilabel>Image</guilabel> tab.
+ </para>
+
+ <example>
+ <title>Fuzzy search by sketch</title>
+ <mediaobject>
+ <imageobject><imagedata
fileref="&path;using-mainwindow-searchsketch.png" format="PNG" /></imageobject>
+ </mediaobject>
+ </example>
+ </listitem>
+
+ </itemizedlist>
+</sect2>
+
+<!--
+Local Variables:
+mode: sgml
+sgml-omittag: nil
+sgml-shorttag: t
+End:
+-->
diff --git a/digikam/using-mainwindow-imageview.docbook
b/digikam/using-mainwindow-imageview.docbook
new file mode 100644
index 0000000..261caa2
--- /dev/null
+++ b/digikam/using-mainwindow-imageview.docbook
@@ -0,0 +1,184 @@
+<sect2 id="using-mainwindow-imageview">
+<title>Image Area</title>
+
+ <sect3>
+ <title>General Information</title>
+
+ <para>
+ In all eight views the Image Area shows the result of your
selection or search on the Left Sidebar in the Icon Area. Each image is
displayed as a thumbnail. You can alter the size of the thumbnails using the
magnifier slider close to the right end of the status bar.
+ <mediaobject>
+ <imageobject><imagedata
fileref="&path;using-mainwindow-zoombuttons.png" format="PNG"/></imageobject>
+ </mediaobject>
+ </para>
+
+ <para>
+ The first time you select an Album you may have to wait briefly
while the thumbnails are generated.
+ </para>
+
+ <para>
+ Information about each photograph is displayed below each
thumbnail. You can control what information is displayed from the
+ <menuchoice>
+ <guimenu>Settings</guimenu>
+ <guimenuitem>Configure &digikam;</guimenuitem>
+ </menuchoice>
+ dialog. Select the <guilabel>Album View</guilabel> page and look
for the <guilabel>Icon-View Options</guilabel> section.
+ </para>
+
+ <para>
+ The thumbnails have <firstterm>Tool Tips</firstterm> which will
pop up if you allow the mouse to dwell over a thumbnail for a moment. The Tool
Tip shows the most important properties of the photograph including any tags
that you have applied.
+ </para>
+
+ <para>
+ <screenshot><mediaobject><imageobject><imagedata
fileref="&path;using-mainwindow-tooltip.png" format="PNG" />
</imageobject></mediaobject></screenshot>
+ </para>
+
+ <para>
+ The content of the Tool Tips can be configured in the Tool Tip
section of
+
+ <menuchoice>
+ <guimenu>Settings</guimenu>
+ <guimenuitem>Configure &digikam;</guimenuitem>
+ </menuchoice>
+ </para>
+
+ <para>
+ As an alternative you can display the photographs in a table by
hitting the <menuchoice><guimenu>Table</guimenu></menuchoice> button on the
Main Toolbar or by selecting
<menuchoice><guimenu>View</guimenu><guimenuitem>Table</guimenuitem></menuchoice>
menu from the menu bar. This allows to see a lot of photographs at the same
time (Tip: leave away the thumbnail column) in a way you can customize the
usual way by right-clicking on the headline bar and choose the information you
want to see. Left-clicking on a line in the table will open the preview of that
photograph.
+ </para>
+
+ <para>
+ You can access most of the functions that &digikam; can perform on
a photograph by right-clicking the thumbnail or line in the table (context
menu) or by selecting from the <menuchoice><guimenu>Item</guimenu></menuchoice>
menu in the menu bar.
+ </para>
+
+ </sect3>
+
+ <sect3 id="using-imageviewing">
+ <title>Viewing an image</title>
+
+ <para>
+ There are several possibilities to view an image. You can either
click on it, select
+ <menuchoice>
+ <shortcut><keycombo
action="press"><keycap>F3</keycap></keycombo></shortcut>
+
<guimenu>Image</guimenu><guisubmenu>View</guisubmenu><guimenuitem>Preview
Image</guimenuitem>
+ </menuchoice>
+ from the menu bar or select <guilabel>View</guilabel> from the
context menu. The Preview Area will open and the Icon Area will be reduced to
one line. For viewing it larger, click the sidebars away (by just clicking on
the active button on them). An even larger view you can achieve by clicking the
<quote>Show Fullscreen</quote> icon
+ <inlinemediaobject>
+ <imageobject><imagedata
fileref="&path;using-mainwindow-icon-fullscreen.png" format="PNG"/>
</imageobject>
+ </inlinemediaobject>
+ either on the thumbnail or on the preview. While viewing images
you can take action from the context menu at any time (not in fullscreen mode).
To close the preview, just click again or press
+ &Esc;
+ or
+ <keycap>F3</keycap>
+ or click the
+ <menuchoice><guimenu>Table</guimenu></menuchoice> or
+ <menuchoice><guimenu>Thumbnails</guimenu></menuchoice> button.
+ </para>
+
+ <para>
+ </para>
+
+ <para>
+ <mediaobject>
+ <imageobject><imagedata
fileref="&path;using-mainwindow-preview.png" format="PNG"/></imageobject>
+ </mediaobject>
+ </para>
+
+ <para>
+ You can also view your images in a slideshow using the
<quote>Slideshow</quote> drop down menu from the Main Toolbar. You have the
choice to start a slideshow with a selection of photographs, the whole content
of the folder (or search result) or even including all subfolders.
+ </para>
+
+ </sect3>
+
+ <sect3 id="using-imageediting">
+ <title>Editing a Photograph</title>
+
+ <para>
+ You can open the Image Editor on a photograph either clicking the
<guilabel>Image Editor</guilabel> button on the Main Toolbar or by selecting
+ <menuchoice>
+ <shortcut><keycap>F4</keycap></shortcut>
+ <guimenu>Item</guimenu><guimenuitem>Open...</guimenuitem>
+ </menuchoice>
+ from the menu bar or by right-clicking and selecting
<guilabel>Open...</guilabel> from the context menu. See the <link
linkend="editor-using">&digikam; Image Editor</link> section for instructions
on how to edit your photographs. The Image Editor offers a wide range of tools
to enhance, decorate and/or modify your photographs.
+ </para>
+
+ </sect3>
+
+ <sect3 id="using-externalapp">
+ <title>Viewing or Editing a Photograph With Another Application</title>
+
+ <para>
+ Sometimes &digikam; may not provide all of the capabilities you
need. You can open a photograph in another application by right-clicking on it
and selecting from the <guilabel>Open With...</guilabel> sub-menu (At the
moment this function is available only under &Linux;). The list of applications
that appear in this menu is controlled by the standard desktop file
associations for the image format type of this photograph. Consult the desktop
manual for instructions on changing these file associations if the application
that you need is not listed.
+ </para>
+
+ <para>
+ Note that there can be a problem with meta-data embedded in
photographs when they are edited by other image manipulation applications. Some
applications do not retain the photograph's meta-data when you save a modified
image. This means that if you modify a photograph using one of these programs
you will lose information such as orientation, aperture &etc; that are stored
in the EXIF and IPTC tags.
+ </para>
+
+ </sect3>
+
+ <sect3 id="using-rotateimage">
+ <title>Lossless Image Rotation</title>
+
+ <note><para>
+ There is a difference between rotating a photograph in one of the
Views of &digikam; or in the Image Editor. The Image Editor uses a different
method of rotating an image, you may not notice any difference but the Image
Editor method can cause some loss of quality in the photograph when saving the
picture as JPEG. The rotation methods described here preserve the original
quality of the photograph also in JPEG - Files.
+ </para></note>
+
+ <para>
+ &digikam; provides two ways to get your photographs the right way
up. The simplest method is to click one of the rotate icons on the thumbnail or
the preview or to right-click for the context menu and select
<guilabel>Rotate</guilabel> and then pick the direction of rotation needed.
+ </para>
+
+ <para>
+ The second method to select
+ <menuchoice>
+ <guimenu>Item</guimenu><guimenuitem>Auto Rotate/Flip Using
EXIF Information</guimenuitem>
+ </menuchoice>
+ from the menu bar. Most digital cameras have an orientation
sensor. This sensor can detect how you hold the camera while taking an image.
It stores this orientation information inside the image. This meta data is
stored in an embedded meta-data section called EXIF. The cameras could rotate
the image themselves right away, but they have limited processing power, so
they leave this job to an application like &digikam;. If the camera is storing
the orientation, then &digikam; can use it to automatically rotate your
photographs so that they are the correct way up when you display them.
&digikam; will rotate the image on disk according to this orientation
information.
+ </para>
+
+ <para>
+ The photograph is rotated without loss of quality and the
orientation information is set to normal, so that other EXIF-aware applications
will handle it correctly. The <link linkend="camerainterface.anchor">Import
Tool</link> can perform this operation automatically when it uploads the
photographs from your camera which will ensure that your photographs are always
the right way up. The rotate operation will do nothing if your camera does not
include this information in the photos.
+ </para>
+
+ </sect3>
+
+ <sect3 id="using-renameimage">
+ <title>Renaming a Photograph</title>
+
+ <para>
+ You can change the filename for a photograph by right-clicking a
thumbnail and selecting
+ <menuchoice>
+ <shortcut><keycap>F2</keycap></shortcut>
+ <guimenu>Rename</guimenu>
+ </menuchoice>. Remember to keep the file extension (.jpg, .tif,
&etc;).
+ </para>
+
+ <para>
+ You can also batch rename photographs. One method is to use the
<link linkend="bqm.anchor">Batch Queue Manager</link> (B). Another one is to
select multiple photographs and then press <keycap>F2</keycap>. A dialog will
open showing the list of selected photographs with their current name and the
new name. These two are identical at first until you place the cursor in the
input field, type in something and/or select a modifier from the buttons below.
Make use of the tooltips!
+ </para>
+
+ </sect3>
+
+ <sect3 id="using-deleteimage">
+ <title>Deleting a Photograph</title>
+
+ <para>
+ When you delete a photograph from &digikam; with
+ <menuchoice>
+ <shortcut><keycombo
action="simul"><keycap>Del</keycap></keycombo></shortcut>
+ <guimenu>Item</guimenu><guimenuitem>Move to Trash</guimenuitem>
+ </menuchoice>
+ it will be moved from its folder on the hard disk to the internal
Trash Can.
+ </para>
+
+ <para>Deleting works from anywhere in any &digikam; window.</para>
+
+ </sect3>
+
+</sect2>
+
+<!--
+Local Variables:
+mode: sgml
+sgml-omittag: nil
+sgml-shorttag: t
+End:
+-->
diff --git a/digikam/using-mainwindow-intro.docbook
b/digikam/using-mainwindow-intro.docbook
new file mode 100644
index 0000000..099a741
--- /dev/null
+++ b/digikam/using-mainwindow-intro.docbook
@@ -0,0 +1,102 @@
+<sect2 id="using-mainwindow-intro">
+ <title>Introduction to the Main Window</title>
+
+ <para>
+ <mediaobject>
+ <imageobject><imagedata
fileref="&path;using-mainwindow-preview.png" format="PNG" /></imageobject>
+ </mediaobject>
+ </para>
+
+ <sect3 id="using-areasandbars">
+ <title>Areas and Bars</title>
+
+ <para>
+ &digikam;'s main window has two areas in the center showing your
photographs. One is the <firstterm>Icon Area</firstterm>, showing thumbnails of
the content of the selected album or of a search result, and the other one the
<firstterm>Preview</firstterm>, showing the selected image. Together let's call
them the <link linkend="using-mainwindow-imageview">Image Area</link>. In the
top left corner of the Preview we have a few buttons for moving back and forth
through the content of the album, for rotating the image, for showing or adding
face tags and to switch to full screen mode. By clicking on the preview you can
make it disappear and by clicking on the picture area of a thumbnail open it
again.
+ </para>
+
+ <para>
+ The Image Area in the center is surrounded by the menu bar and the
<link linkend="maininterface-toolbar">Main Toolbar</link> at the top, the <link
linkend="maininterface-statusbar">Status Bar</link> at the bottom and the Left
and <link linkend="using-sidebar-intro">Right Sidebar</link>. The Left Sidebar
lets you switch between eight <quote>Views</quote>: Albums (shown here), Tags,
Labels, Dates, Timeline, Search, Fuzzy (Search) and People (Tags). The Right
Sidebar can be used to show all information about your images and partly also
to edit them. You can use all these views to organize and find your
photographs. If you click on one of the buttons on the sidebars there will fold
out another area, offering possibilities to select, to make inputs, ⪚ for
searches, to edit data and to show information.
+ </para>
+
+ <para>
+ Don't worry if your main window looks quite different at the moment.
You will soon learn how to switch the different areas on and off and at some
point you might get a look very similar to the above screenshot.
+ </para>
+
+ <para>
+ Drag & Drop of images works about everywhere: d&d an image
into another branch of the album tree, across the horizontal album separation
line, or to another application window. The only restriction is that you cannot
d&d into tag, date or searches.
+ </para>
+
+ </sect3>
+
+ <sect3 id="maininterface-statusbar">
+ <title> The Status Bar</title>
+
+ <para>The status bar at the bottom shows in all eight views:
+ <itemizedlist>
+ <listitem><para>the file name when selecting a single
file</para></listitem>
+ <listitem><para>selection information when several items are
selected</para></listitem>
+ <listitem><para>Quick filters:</para>
+ <para>- Information how many filters are active</para>
+ <para>- a trash bin button to reset all active filters</para>
+ <para>- a funnel button to open the filter settings
panel</para>
+ </listitem>
+ <listitem><para>a progress bar for batch processes, ⪚ assigning
tags</para></listitem>
+ <listitem><para>a thumbnail and preview size slider with buttons
for "Fit to Window" and "Zoom to 100%"</para></listitem>
+ <listitem><para>a size selection pop up list in % for the
preview</para></listitem>
+ </itemizedlist>
+ </para>
+
+ </sect3>
+
+ <sect3 id="maininterface-toolbar">
+ <title> Main Toolbar</title>
+ <para>
+ The window top shows the Menu Bar and the <firstterm>Main
Toolbar</firstterm> below.
+ </para>
+
+ <para>
+ <mediaobject>
+ <imageobject><imagedata
fileref="&path;using-mainwindow-toolbar.png" format="PNG"/></imageobject>
+ </mediaobject>
+ </para>
+
+ <para>
+
+ <orderedlist>
+
+ <listitem><para>Open Image Editor with the selected
image</para> </listitem>
+
+ <listitem><para>Open Light Table (L)</para> </listitem>
+
+ <listitem><para>Open <link linkend="bqm.anchor">Batch Queue
Manager</link> (B)</para></listitem>
+
+ <listitem><para>Import (drop down menu showing all connected
cameras and mass storage devices)</para></listitem>
+
+ <listitem><para>Switch to thumbnail view</para></listitem>
+
+ <listitem><para>Toggle preview of selected
image</para></listitem>
+
+ <listitem><para>Switch to configurable table
view</para></listitem>
+
+ <listitem><para>Slideshow drop down menu</para></listitem>
+
+ <listitem><para>Toggle Full Screen
(&Ctrl;+&Shift;+<keycap>F</keycap>)</para></listitem>
+
+ </orderedlist>
+
+ </para>
+
+ <para>
+ You can customize the Toolbar by choosing
<menuchoice><guimenu>Settings</guimenu> <guimenuitem>Configure
Toolbars...</guimenuitem></menuchoice> or right click on it and choose
<guimenuitem>Configure Toolbars...</guimenuitem> from the context menu.
+ </para>
+ </sect3>
+
+</sect2>
+
+<!--
+Local Variables:
+mode: sgml
+sgml-omittag: nil
+sgml-shorttag: t
+End:
+-->
diff --git a/digikam/using-mainwindow-labelsview.docbook
b/digikam/using-mainwindow-labelsview.docbook
new file mode 100644
index 0000000..ec5e565
--- /dev/null
+++ b/digikam/using-mainwindow-labelsview.docbook
@@ -0,0 +1,31 @@
+<sect2 id="using-mainwindow-labelsview">
+ <title>Labels View</title>
+
+ <para>
+ The Labels View allows you to select photographs by the Rating, Pick
and Color labels you assigned to them previously either by using the context
menu of a thumbnail or the <guilabel>Description</guilabel> tab of the
<guilabel>Captions/Tags</guilabel> section on the Right Sidebar.
+ </para>
+
+ <para>
+
+ <mediaobject>
+ <imageobject>
+ <imagedata fileref="&path;using-mainwindow-labelsview.png"
format="PNG" />
+ </imageobject>
+ </mediaobject>
+
+ </para>
+
+ <para>
+ You may select more than one label by <keycombo
action="simul">&Ctrl;<mousebutton>left</mousebutton></keycombo> click. The
selected labels are connected by boolean AND, ⪚ selecting Four Star and
Yellow will display only photographs that have <emphasis>both</emphasis> labels
assigned. You can perform even more sophisticated searches by using the
<guilabel>Filters</guilabel> section of <link
linkend="using-sidebar-filters">The Right Sidebar</link>.
+ </para>
+
+</sect2>
+
+
+<!--
+Local Variables:
+mode: sgml
+sgml-omittag: nil
+sgml-shorttag: t
+End:
+-->
diff --git a/digikam/using-mainwindow-peopleview.docbook
b/digikam/using-mainwindow-peopleview.docbook
new file mode 100644
index 0000000..60520fd
--- /dev/null
+++ b/digikam/using-mainwindow-peopleview.docbook
@@ -0,0 +1,114 @@
+<sect2 id="using-mainwindow-peopleview">
+ <title>People View</title>
+
+ <para>
+ As long as you are not just taking pictures from machines or stars or
something like that, Face Management might be an interesting feature for you
(even with a machine there might be a human being operating it). In &digikam;
it consists of two tasks: Face Detection and Face Recognition.
+ </para>
+
+ <sect3> <title>Face Detection</title>
+
+ <para>
+ The first step is to have &digikam; finding all those pics that
show faces not even knowing yet who's face it is. To prepare that process you
click <guilabel>Scan collection for faces</guilabel> which will open the
Scanning faces dialog. Right under the header you have a drop down menu where
you can choose between
+ <itemizedlist>
+ <listitem>
+ <para>Skip images already scanned</para>
+ </listitem>
+ <listitem>
+ <para>Scan again and merge results</para>
+ </listitem>
+ <listitem>
+ <para>Clear unconfirmed results and rescan</para>
+ </listitem>
+ </itemizedlist>
+ </para>
+
+ <para>
+ The first one you would choose if you didn't scan yet or if you
did with a satisfying result but added new photographs since then or if you
already improved a search result, ⪚ by removing face tags which obviously
don't show a face. The second you would choose if you want the images already
scanned to be included in the next scan. The third is more interesting in the
context of Face Recognition since <quote>unconfirmed results</quote> means face
tags that don't have a name assigned to them yet.
+ </para>
+
+ <para>
+ For the task we are talking about you check <guilabel>Detect
faces</guilabel>, of course. Since face detection is a time-consuming task you
better <emphasis>don't</emphasis> hit <guilabel>Scan</guilabel> right away,
rather <guilabel>Options</guilabel>. An additional area will fold out organized
with three tabs. In <guilabel>Albums</guilabel> you can confine the scan to
certain albums or tags. In <guilabel>Parameters</guilabel> you can try to find
a balance between speed and accuracy that suits your needs. Under
<guilabel>Advanced</guilabel> you will find two checkboxes. The first is
explained by the text above it. The second is for face recognition, see next
article.
+ </para>
+
+ <para>
+ Once you have chosen your options carefully you click
<guilabel>Scan</guilabel> and after a while, depending on the scope of your
selection, the result will be presented in the Image Area. In the Tags list of
the Left Sidebar you will see the People branch of your tag tree. You will see
the whole scan result only if the topmost tag <quote>People</quote> is
selected. In the tree you will see a new virtual tag called
<quote>Unknown</quote> which will show all those images where faces are
recognized but not yet connected to a person. If you just scanned for the first
time you will find the whole result also here.
+ </para>
+
+ <para>
+ <example>
+ <title>Face Detection result</title>
+ <mediaobject>
+ <imageobject><imagedata
fileref="&path;using-mainwindow-facedetection.png" format="PNG" /></imageobject>
+ </mediaobject>
+ </example>
+ </para>
+
+ <para>
+ Note that the thumbnails presented here are not showing the whole
image. They show the area of the image where the scan algorithm put down a
<firstterm>Face Tag</firstterm>. You can see that if you click on the
thumbnail. In the preview that opens you will see the whole image with all the
face tags on them. If you don't see them, click the
+ <inlinemediaobject>
+ <imageobject><imagedata
fileref="&path;using-mainwindow-icon-showfacetags.png" format="PNG"
/></imageobject>
+ </inlinemediaobject>
+ button in the upper left corner of the preview. If there is more
than one face tag on the image it will also be represented by more than one
thumbnail. In the screenshot above this is the case with the two topmost
thumbnails.
+ </para>
+
+ <para>
+ <mediaobject>
+ <imageobject><imagedata
fileref="&path;using-mainwindow-facedetectiontag.png" format="PNG"
/></imageobject>
+ </mediaobject>
+ </para>
+
+ <para>
+ This screenshot image have been chosen because it shows one
important issue: the algorithm will find inevitably details in an image that
resemble a face but are actually something else. That's what the
<guilabel>Remove</guilabel> button is for. It will remove the face tag from the
photograph and if it is the only face tag (left) the photograph will disappear
from the scan result.
+ </para>
+
+ <para>
+ If it really is a face the field labeled "Who is this?" comes into
play. Here you can either type in the name of an existing People tag out of
your tag tree or use the drop down function to show your tag tree and select a
tag. With <guilabel>Confirm</guilabel> you can save that to the database. If it
was the only face tag (left) the image will disappear from the
<quote>Unknown</quote> selection and you will find it once you select either
the <quote>People</quote> tag or one of the tags you assigned to one of the
face tags in that image.
+ </para>
+
+ <para>
+ In the context menu of the preview there are two more items
related to face tags: <guilabel>Add a Face Tag</guilabel> and <guilabel>Clear
all faces on this image</guilabel>.
+ </para>
+
+ </sect3>
+
+ <sect3> <title>Face Recognition</title>
+
+ <para>
+ Assigning People tags to face tags is an important prerequisite to
Face Recognition. Very obviously &digikam; can only recognize faces if it has
something to compare with. So it's up to you to show it the ropes, which means
in this case to tell &digikam;: This is Lara, this is Juan, this is Peter and
so forth. For that you would, after performing a Face Detection as described in
the previous article, typically select the <quote>unknown</quote> tag on the
Left Sidebar, click on a thumbnail and click, if necessary, on the
+ <inlinemediaobject>
+ <imageobject><imagedata
fileref="&path;using-mainwindow-icon-showfacetags.png" format="PNG"
/></imageobject>
+ </inlinemediaobject>
+ (Show Face Tags) button. Now you should see the face tags of that
photograph. Those which have a people (or other) tag already assigned will
simply show the name of that tag. The others, showing <quote>unknown</quote>
faces, will show a field and two buttons as in the screenshot of the previous
article. In the field labeled "Who is this?" you can either type in the name of
an existing People tag out of your tag tree or use the drop down function to
show your tag tree and select a tag. With <guilabel>Confirm</guilabel> you can
save that to the database.
+ </para>
+
+ <para>
+ If a face tag is confirmed and thus showing only the name of the
tag but not the buttons to remove, edit or confirm it, but you need this
buttons because ⪚ it's wrong and you want to edit or remove it, just
double-click on the name and the buttons will re-appear.
+ </para>
+
+ <para>
+ Once you have a tag assigned to a few photographs you can have
&digikam; looking if it can find more photographs showing the same face. To
prepare that process you click <guilabel>Scan collection for faces</guilabel>
but his time you select <guilabel>Recognize faces</guilabel>.
+ </para>
+
+ <para>
+ Face Recognition is faster than Face Detection but it still makes
sense to click <guilabel>Options</guilabel> and confine the scan to certain
albums or tags in the <guilabel>Albums</guilabel> tab, ⪚ to the "Unknown"
tag. In the <guilabel>Parameters</guilabel> tab we can play with the balance
between speed and accuracy. Under <guilabel>Advanced</guilabel> you will find
two checkboxes. The first is explained by the text above it.
+ </para>
+
+ <para>
+ In case of unsatisfying results it might be helpful to use
<guilabel>Clear and rebuild all training data</guilabel>. One reason can be
that there are too many face tags assigned to a person which shows this person
in a way that doesn't really help the search algorithm, ⪚ with sunglasses,
blurred, unusual colors, carnival make up, dark shaded areas in the face,
baby/kid/adult photographs mixed... Another reason to use that option can be
false face recognition due to a wrong accuracy setting in the
<guilabel>Parameters</guilabel> tab.
+ </para>
+
+ <para>
+ To start the Face Recognition you click <guilabel>Scan</guilabel>.
The process will tag every recognized face with the appropriate People tag out
of your tag tree and the corresponding thumbnail will disappear from the
"Unknown" tag selection.
+ </para>
+
+ </sect3>
+
+</sect2>
+
+<!--
+Local Variables:
+mode: sgml
+sgml-omittag: nil
+sgml-shorttag: t
+End:
+-->
diff --git a/digikam/using-mainwindow-searchesview.docbook
b/digikam/using-mainwindow-searchesview.docbook
new file mode 100644
index 0000000..5f176c3
--- /dev/null
+++ b/digikam/using-mainwindow-searchesview.docbook
@@ -0,0 +1,113 @@
+<sect2 id="using-mainwindow-searchesview">
+ <title>Search View</title>
+ <para>
+ We talked about quite a few views already and their searching
capabilities, which are all kind of specialized. The Search View now offers a
more versatile and general way of searching. There are two different approaches.
+ </para>
+
+ <para>
+ <mediaobject>
+ <imageobject><imagedata
fileref="&path;using-mainwindow-searchview.png" format="PNG" /> </imageobject>
+ </mediaobject>
+ </para>
+
+ <sect3> <title>The Quick Search</title>
+ <anchor id="quicksearchtool.anchor"/>
+
+ <para>
+ Quick Search is the adaptive search box at the top of the search
dialog (Left Sidebar) and provides you with a simple means to search the
&digikam; database with a single query. You can enter any arguments in the
<guilabel>Search:</guilabel> text field and it will be used to determine the
results. For instance, you can enter the string 'birthday' to search the
complete database for occurrences of the word 'birthday' in all metadata text
fields, or '05.png' to search for a specific image file name '05.png' (no
escaping as in regexpressions needed).
+ </para>
+
+ <para>Search Properties:
+ <itemizedlist>
+ <listitem><para>searches are case insensitive</para></listitem>
+ <listitem><para>blank separated search terms are boolean AND
combinations</para></listitem>
+ <listitem><para>special characters are literal and not
interpreted ( . * ? / &etc;)</para></listitem>
+ <listitem><para>include all elements of the database: names,
rating, keywords, tags, albums, collections, dates (and more in the
future)</para></listitem>
+ </itemizedlist>
+ </para>
+
+ <para>
+ You can save your searches as a live folder that always filters
for what you entered as search criteria. Just type a name for the search into
the <guilabel>Save Current Search</guilabel> field and click the save button to
the right of it. When saved, the filter will appear in the
<guilabel>Searches</guilabel> list. By clicking the title bar of this list you
can invert the sorting order. Once you select one of your saved searches, the
search result will be presented in the Image Area immediately and the
<guilabel>Save Current Search</guilabel> field will convert into a
<guilabel>Edit Stored Search</guilabel> field where you can edit your search
criteria. The name of the saved search will be used to label the search result
in the Image Area.
+ </para>
+
+ <para>
+ If you want to delete or rename a saved search from the list,
right-click on it and select from the context menu.
+ </para>
+
+ </sect3>
+
+ <sect3 id="using-mainwindow-advancedsearchtool">
+ <title>The Advanced Search Tool</title>
+
+ <para>
+ Advanced Search tool provides an extended search form which can be
used to search in specific fields of the &digikam; database in a more
sophisticated way. Click the <guilabel>Advanced Search...</guilabel> button and
it will come up like this:
+ </para>
+
+ <para>
+ <mediaobject>
+ <imageobject><imagedata
fileref="&path;using-mainwindow-advancedsearchtool.png" format="PNG"
/></imageobject>
+ </mediaobject>
+ </para>
+
+ <para>
+ The field labeled <quote>Find pictures that have associated all
these words:</quote> is just a duplicate of the Quick Search field.
+ </para>
+
+ <para>
+ Click on one of the blue categories and there will fold out an
area with all the fields you can search for in that very category. Depending on
the kind of data each field contains different input fields for your search,
sometimes more than one type for the same field. Simplest are selection
buttons, ⪚ for colors. Then you have plain fields of the <quote>The
<replaceable>field content</replaceable> contains</quote> type, drop down lists
and checkboxes. Many fields have two input fields allowing you to define a
range, ⪚ <quote>Find pictures with a width between</quote>. And often you
find a link type thing called <quote>Any</quote> which opens a drop down field
with checkboxes for the possible contents of that field.
+ </para>
+
+ <example>
+ <title>Advanced Search Criteria</title>
+ <mediaobject>
+ <imageobject><imagedata
fileref="&path;using-mainwindow-advancedsearchtool2.png" format="PNG"
/></imageobject>
+ </mediaobject>
+ </example>
+
+ <para>
+ Thanks to the labeling of the search fields they are pretty much
self explaining. What we have to talk about is how they work together if you
fill in or select more than one. On the right side of the header (blue area at
the top) you find a little link <quote>Options</quote>. If you click on that
one the header will change and you see four options.
+ </para>
+
+ <para>
+ <itemizedlist>
+ <listitem><para>
+ <quote>Meet All of the following conditions</quote> means
that your different search parameters will be connected by boolean AND for the
search. Example: if you selected Album name <quote>Holidays</quote> and color
<quote>red</quote> the search will find all pictures labeled with
<quote>red</quote> out of the Album <quote>Holidays</quote>.
+ </para></listitem>
+
+ <listitem><para>
+ <quote>Meet Any of the following conditions</quote> means
that your different search parameters will be connected by boolean OR for the
search. Example: if you selected Album name <quote>Holidays</quote> and color
<quote>red</quote> the search will find the content of the Album
<quote>Holidays</quote> <emphasis>and</emphasis> all pictures labeled with
<quote>red</quote> out of your whole collection.
+ </para></listitem>
+
+ <listitem><para>
+ <quote>None of these conditions are met</quote> means that
your different search parameters will be connected by boolean NAND for the
search. Again our example: if you selected Album name <quote>Holidays</quote>
and color <quote>red</quote> the search will find all pictures of your
collection except those labeled with <quote>red</quote>
<emphasis>and</emphasis> except those out of the Album <quote>Holidays</quote>.
+ </para></listitem>
+
+ <listitem><para>
+ <quote>At least one of these conditions is not met</quote>
means that your different search parameters will be connected by boolean NOR
for the search. One more example: if you selected Album name
<quote>Holidays</quote> and color <quote>red</quote> the search will find all
pictures of your collection except those labeled with <quote>red</quote> out of
the Album <quote>Holidays</quote>.
+ </para></listitem>
+ </itemizedlist>
+ </para>
+
+ <para>
+ Complicated? No, good! Because the real stuff is yet to come. Have
a look at the footer of the Advanced Search Tool. Here you find <guilabel>+ Add
Search Group</guilabel>. If you hit this button another list with the same
categories of search fields will open below the first one (scroll down in case
you don't see it right away) separated by a blue header showing the same
options we were just talking about. On top of them you see an underlined OR
meaning that this list is connected to the first one by boolean OR. You can
change that to AND by clicking on it.
+ </para>
+
+ <para>
+ To explain how it works let's make another example based on one of
those we had already. I want to use the second one. That means: in the first
group you checked <quote>Meet Any of the following conditions</quote> and you
selected Album name <quote>Holidays</quote> and color <quote>red</quote>. As we
said already this will produce all pictures labeled with <quote>red</quote> out
of your whole collection <emphasis>and</emphasis> the content of the Album
<quote>Holidays</quote>. Now let's assume for some reason you want to exclude
all rejected files and all files with a rating lower than three stars. So you
open a second group, click on the underlined OR in the header in order to
change it to AND, select <quote>None of these conditions are met</quote>, fold
out the <quote>Picture Properties</quote>, check under <quote>Labels</quote>
the red flag (rejected) and select under <quote>Rating</quote> no star (five
white stars) in the first field and two stars in the second field. Note that
there is a difference between <quote>no star</quote> and <quote>No Rating
assigned</quote>! If you want to exclude the pictures without any rating as
well you got to open another Search Group, click on the underlined OR in the
header in order to change it to AND, select <quote>None of these conditions are
met</quote> and select <quote>No Rating assigned</quote> in the <quote>Picture
Properties</quote> category.
+ </para>
+
+ <para>
+ Which brings us to the fact that you can open as many additional
Search Groups as you need to formulate your query. But since the purpose of
this handbook is not to open a competition in creating the most sophisticated
queries I leave it to you to figure out how far you have to go or can go in
this respect and rather finish this section with a few hints about the other
buttons in the Advanced Search Tool. Beside the <guilabel>+ Add Search
Group</guilabel> button you see <guilabel>Reset</guilabel>. This removes all
additional Search Groups and clears all the fields in the remaining one. It's a
good policy to use this button before starting to create a new search, in
particular when you leave the Advanced Search Tool with the intention to use
the Quick Search for your next query, because otherwise the search criteria
remain active even if you don't see them and screw up your new search.
<guilabel>Try</guilabel> carries out the search but leaves the Advanced Search
Tool window open, <guilabel>OK</guilabel> does the same but closes the window.
<quote>Remove Group</quote> in the header of the additional Search Groups
doesn't need an explanation, I think.
+ </para>
+
+ </sect3>
+
+</sect2>
+
+<!--
+Local Variables:
+mode: sgml
+sgml-omittag: nil
+sgml-shorttag: t
+End:
+-->
diff --git a/digikam/using-mainwindow-tagsview.docbook
b/digikam/using-mainwindow-tagsview.docbook
new file mode 100644
index 0000000..26d8236
--- /dev/null
+++ b/digikam/using-mainwindow-tagsview.docbook
@@ -0,0 +1,151 @@
+<sect2 id="using-mainwindow-tagsview">
+ <title>Tags View</title>
+
+ <para>
+ (Hierarchical) tagging provides a flexible and powerful way to
organize and catalog your images. Tags (also called <quote>keywords</quote> in
other applications) are labels that can be applied to individual images or
whole groups. Once a tag has been set to an image the image can be found again
by selecting the tag or doing a search.
+ </para>
+
+ <para>
+ Tags can be arranged in a hierarchical tree. This allows you to
organize your tags in a logical manner. You can collapse parts of the tree in
the <quote>Tags</quote> list so that you can easily find the tags that you are
looking for.
+ </para>
+
+ <para></para>
+
+ <para>
+ <mediaobject>
+ <imageobject><imagedata
fileref="&path;using-mainwindow-tagsview.png" format="PNG" /></imageobject>
+ </mediaobject>
+ </para>
+
+ <para>
+ When a tag is selected in the Left Sidebar, all of the images that are
marked with that tag are displayed in the View Area.
+ </para>
+
+ <para>
+ But before assigning and using tags you first have to define them. If
you import photographs with tags assigned &digikam; will build an appropriate
tag tree during import. Other than that you have to define tags by yourself. An
easy access to that is the context menu shown in the screenshot above.
+ </para>
+
+ <sect3 id="using-managetags"> <title>Managing Tags</title>
+
+ <para>
+ You can add new tags by right-clicking on either the
<quote>Tags</quote> label or an existing tag and selecting <guilabel>New
Tag...</guilabel>. A dialog will open where you can type in the tag name (or
even a whole hierarchy branch), assign an icon and/or a shortcut to the tag. If
you add a new tag by right-clicking on an existing tag, your new tag will be
created as a sub-tag.
+ </para>
+
+ <para>
+ You can delete a tag by right-clicking on the tag you want to
delete and selecting <guilabel>Delete Tag</guilabel>. When you delete a tag,
the photographs themselves are not deleted. Simply the tag is removed from
those photographs.
+ </para>
+
+ <para>
+ You can move the position of a tag within the tree by dragging it
to the position that you want and dropping it there. A menu will appear that
gives you the option to
+ <guilabel>Move</guilabel> the tag. This works from the left and
right sidebar. A tag can only be in one place in the tree at a time.
+ </para>
+
+ <para>
+ You can set the Tag Properties by right-clicking on a tag and
selecting <guilabel>Properties...</guilabel>. The Tag Properties allow you to
change the name of the tag, the icon used in the Tags tree and the shortcut.
+ </para>
+
+ <para>
+ To select a photograph as the tag icon, right-click on the
photograph that you want to use as the tag icon and select <guilabel>Set as Tag
Thumbnail</guilabel> from the context menu. Additionally you can use drag and
drop to set the tag icon. Drag the images icon and drop it on the currently
selected tag in the tag list.
+ </para>
+
+ <para>
+ A tool for more elaborate work on big tag trees is the <link
linkend="using-tagsmngr">Tags Manager</link> which you can access by clicking
the <guilabel>Open Tag Manager</guilabel> button at the top of the Tags tree.
+ </para>
+
+ <para>
+ In the <link linkend="keywords">Digital Asset Management
(DAM)</link> chapter of this handbook you can find some useful considerations
about how to build your Tags tree.
+ </para>
+
+ <para>
+ It is not always easy to build a logical hierarchy from general
and generic categories. You might run into a problem like this:
+ </para>
+
+ <blockquote><screen>
+ Animal
+ - Domestic Animal
+ - Cat
+ - Cattle
+ - Dog
+
+ - Wild Animal
+ - Bird
+ - Cat
+ - Cheetah
+ - Lion
+ - Tiger
+
+ - Zoo Animal
+ - Bird
+ - Cat
+ - Cheetah
+ - Leopard
+ </screen></blockquote>
+
+ <para>
+ In this tag tree the keyword <quote>Cat</quote> appears three
times. This will not cause a problem within &digikam; but there are quite a few
views where the user cannot know which of the three is applied to an image
because he might not be able to see the whole hierarchy of the tag. A help
could be to tag the image in a case like this also with the parent tag or even
the whole hierarchy but it becomes quite unwieldy, ⪚ in the image icon if
you have the tags displayed there. The second <quote>Cat</quote> can be avoided
by calling it <quote>Wild Cat</quote> but calling the third one <quote>Zoo
Cat</quote> is a bit out of the roof, I think. And still: there are also two
<quote>Cheetah</quote>!
+ </para>
+
+ <para>
+ Solution: You replace the <quote>Zoo Animal</quote> branch by a
single tag <quote>Zoo</quote> which you use in addition to the tag you choose
from the two remaining branches. You could even put it on the top level of your
hierarchy if you have photographs taken in a zoo but not showing animals.
+ </para>
+
+ </sect3>
+
+ <sect3 id="using-taggingimages"> <title>Tagging Photographs</title>
+
+ <para>
+ Before you can get the most out of &digikam;'s tagging
capabilities, you must first tag your photographs. There are a few methods for
that task. Once you have identified the photographs that you want to tag you
can either drag and drop them onto the tag in the Tags tree or, by
right-clicking on the selected photographs in the Image Window, you can use the
<guilabel>Assign Tag</guilabel> menu to select the tags you wish to set.
+ </para>
+
+ <para>
+ Drag and Drop: works with both sidebars provided they are showing
tags of course. With the Right Sidebar it works the obvious way: you drag the
tag and drop it onto the photograph or selection of photographs you want to
tag. With the Left Sidebar you have to drag the photographs to the tags. You
want to know why? Just try it the other way and you will see :-)
+ </para>
+
+ <para>
+ Shortcuts: as mentioned earlier in this chapter you can assign
keyboard shortcuts in the Tag Properties. With these you can assign or
un-assign a tag to the selected photograph(s).
+ </para>
+
+ <para>
+ Context menu: by right-clicking on the selected photographs and
choosing <guilabel>Assign Tag</guilabel> you will see the next menu step
offering the ten most recently used tags, <guilabel>Add New Tag...</guilabel>,
described at the beginning of the previous <link
linkend="using-managetags">article</link>, and <guilabel>More
Tags...</guilabel> which leads to what is described in the next paragraph. The
context menu method is obviously very useful if you use only a limited number
of tags out of your whole tree for a while.
+ </para>
+
+ <example>
+ <title>Tagging Image with context menu</title>
+ <mediaobject>
+ <imageobject><imagedata
fileref="&path;using-mainwindow-assigntags.png" format="PNG" /></imageobject>
+ </mediaobject>
+ </example>
+
+ <para>
+ You can remove a tag from a photograph by right-clicking on the
photograph and using the <guilabel>Remove Tag</guilabel> menu. This menu will
only show those tags that have been set on this photograph.
+ </para>
+
+ <para>
+ The Right Sidebar: this is what I would call my standard method
for assigning tags. Click <guilabel>Captions/Tags</guilabel> on the Right
Sidebar and then the <guilabel>Tags</guilabel> tab and you will see the whole
tags tree. Simply check/un-check the boxes of the tags you want to
assign/un-assign and then click <guilabel>Apply</guilabel>. If you change focus
without that you will be asked whether you want to apply the changes unless you
disabled that confirmation either by checking <quote>Always apply changes
without confirmation</quote> or by checking <quote>Do not confirm when applying
changes in the right sidebar</quote> in the Miscellaneous section of
<menuchoice><guimenu>Settings</guimenu> <guimenuitem>Configure
digiKam...</guimenuitem></menuchoice>. More details about the other buttons and
fields in the <guilabel>Tags</guilabel> tab see in <link
linkend="using-sidebar-tags">&digikam; sidebar</link>.
+ </para>
+
+ <para>
+ You can label a photograph with as many tags as you like. The
photograph will appear when you select any of the tags that are set against it.
This way you can set a tag for each person in a photograph, as well as the
place the photograph was taken, the event it was taken at, &etc;
+ </para>
+
+ <para>
+ Once you have tagged a photograph, the tag name will appear under
the thumbnail in the Image Area.
+ </para>
+
+ <tip>
+ <para>
+ Tags are stored in a database for fast access, and, the
applied tags are written into IPTC data fields of the image (at least for
JPEG). So you can use your tags with other programs or, in case of loss of that
data in the database, the tags will be re-imported when the image is noticed by
&digikam;.
+ </para>
+ </tip>
+
+ </sect3>
+
+</sect2>
+
+<!--
+Local Variables:
+mode: sgml
+sgml-omittag: nil
+sgml-shorttag: t
+End:
+-->
diff --git a/digikam/using-mainwindow-timelineview.docbook
b/digikam/using-mainwindow-timelineview.docbook
new file mode 100644
index 0000000..bec67d7
--- /dev/null
+++ b/digikam/using-mainwindow-timelineview.docbook
@@ -0,0 +1,28 @@
+<sect2 id="using-mainwindow-timelineview">
+ <title>Timeline View</title>
+
+ <para>
+ The Timeline View shows a timescale-adjustable histogram of the
numbers of images per time unit which is selectable by a drop down field. To
the right of that you can choose between a linear or logarithmic histogram. A
selection frame moves over the histogram. To display the photographs out of a
certain time frame just click on the corresponding bar. You are not restricted
to one bar. With <keycombo
action="simul">&Shift;<mousebutton>left</mousebutton></keycombo> click or
<keycombo action="simul">&Ctrl;<mousebutton>left</mousebutton></keycombo> click
you can add more bars to the first one.
+ </para>
+
+ <para>
+ <mediaobject>
+ <imageobject>
+ <imagedata fileref="&path;using-mainwindow-timeline.png"
format="PNG" />
+ </imageobject>
+ </mediaobject>
+ </para>
+
+ <para>
+ In the field right below you can enter a title and save your
selection. It will then appear in the <quote>Searches</quote> list field below.
But the best is still to come: the Timeline View offers a search for a search!
If you have a lot more searches saved than my ridiculous four in the screenshot
the adaptive search field at the bottom may help to find a certain search.
+ </para>
+
+</sect2>
+
+<!--
+Local Variables:
+mode: sgml
+sgml-omittag: nil
+sgml-shorttag: t
+End:
+-->
diff --git a/digikam/using-mainwindow.docbook b/digikam/using-mainwindow.docbook
index 335b335..f4cadf1 100644
--- a/digikam/using-mainwindow.docbook
+++ b/digikam/using-mainwindow.docbook
@@ -1,863 +1,16 @@
<sect1 id="using-mainwindow">
<title>The Main &digikam; Window</title>
- <sect2 id="using-mainwindow-intro">
- <title>Introduction to the Main Window</title>
-
- <para>
- <mediaobject>
- <imageobject><imagedata
fileref="&path;using-mainwindow-preview.png" format="PNG" /></imageobject>
- </mediaobject>
- </para>
-
- <sect3 id="using-areasandbars">
- <title>Areas and Bars</title>
-
- <para>
- &digikam;'s main window has two areas in the center showing your
photographs. One is the <firstterm>Icon Area</firstterm>, showing thumbnails of
the content of the selected album or of a search result, and the other one the
<firstterm>Preview</firstterm>, showing the selected image. Together let's call
them the <link linkend="using-imagearea">Image Area</link>. In the top left
corner of the Preview we have a few buttons for moving back and forth through
the content of the album, for rotating the image, for showing or adding face
tags and to switch to full screen mode. By clicking on the preview you can make
it disappear and by clicking on the picture area of a thumbnail open it again.
- </para>
-
- <para>
- The Image Area in the center is surrounded by the menu bar and the
<link linkend="maininterface-toolbar">Main Toolbar</link> at the top, the <link
linkend="maininterface-statusbar">Status Bar</link> at the bottom and the Left
and <link linkend="using-sidebar-intro">Right Sidebar</link>. The Left Sidebar
lets you switch between eight <quote>Views</quote>: Albums (shown here), Tags,
Labels, Dates, Timeline, Search, Fuzzy (Search) and People (Tags). The Right
Sidebar can be used to show all information about your images and partly also
to edit them. You can use all these views to organize and find your
photographs. If you click on one of the buttons on the sidebars there will fold
out another area, offering possibilities to select, to make inputs, ⪚ for
searches, to edit data and to show information.
- </para>
-
- <para>
- Don't worry if your main window looks quite different at the
moment. You will soon learn how to switch the different areas on and off and at
some point you might get a look very similar to the above screenshot.
- </para>
-
- <para>
- Drag & Drop of images works about everywhere: d&d an image
into another branch of the album tree, across the horizontal album separation
line, or to another application window. The only restriction is that you cannot
d&d into tag, date or searches.
- </para>
-
- </sect3>
-
- <sect3 id="maininterface-statusbar">
- <title> The Status Bar</title>
-
- <para>The status bar at the bottom shows in all eight views:
- <itemizedlist>
- <listitem><para>the file name when selecting a single
file</para></listitem>
- <listitem><para>selection information when several items are
selected</para></listitem>
- <listitem><para>Quick filters:</para>
- <para>- Information how many filters are active</para>
- <para>- a trash bin button to reset all active
filters</para>
- <para>- a funnel button to open the filter settings
panel</para>
- </listitem>
- <listitem><para>a progress bar for batch processes, ⪚
assigning tags</para></listitem>
- <listitem><para>a thumbnail and preview size slider with
buttons for "Fit to Window" and "Zoom to 100%"</para></listitem>
- <listitem><para>a size selection pop up list in % for the
preview</para></listitem>
- </itemizedlist>
- </para>
-
- </sect3>
-
- <sect3 id="maininterface-toolbar">
- <title> Main Toolbar</title>
- <para>
- The window top shows the Menu Bar and the <firstterm>Main
Toolbar</firstterm> below.
- </para>
-
- <para>
- <mediaobject>
- <imageobject><imagedata
fileref="&path;using-mainwindow-toolbar.png" format="PNG"/></imageobject>
- </mediaobject>
- </para>
-
- <para>
-
- <orderedlist>
-
- <listitem><para>Open Image Editor with the selected
image</para> </listitem>
-
- <listitem><para>Open Light Table (L)</para> </listitem>
-
- <listitem><para>Open <link linkend="bqm.anchor">Batch
Queue Manager</link> (B)</para></listitem>
-
- <listitem><para>Import (drop down menu showing all
connected cameras and mass storage devices)</para></listitem>
-
- <listitem><para>Switch to thumbnail view</para></listitem>
-
- <listitem><para>Toggle preview of selected
image</para></listitem>
-
- <listitem><para>Switch to configurable table
view</para></listitem>
-
- <listitem><para>Slideshow drop down menu</para></listitem>
-
- <listitem><para>Toggle Full Screen
(&Ctrl;+&Shift;+<keycap>F</keycap>)</para></listitem>
-
- </orderedlist>
-
- </para>
-
- <para>
- You can customize the Toolbar by choosing
<menuchoice><guimenu>Settings</guimenu> <guimenuitem>Configure
Toolbars...</guimenuitem></menuchoice> or right click on it and choose
<guimenuitem>Configure Toolbars...</guimenuitem> from the context menu.
- </para>
- </sect3>
-
- </sect2>
-
- <sect2 id="using-imagearea">
- <title>Image Area</title>
-
- <sect3>
- <title>General Information</title>
-
- <para>
- In all eight views the Image Area shows the result of your
selection or search on the Left Sidebar in the Icon Area. Each image is
displayed as a thumbnail. You can alter the size of the thumbnails using the
magnifier slider close to the right end of the status bar.
- <mediaobject>
- <imageobject><imagedata
fileref="&path;using-mainwindow-zoombuttons.png" format="PNG"/></imageobject>
- </mediaobject>
- </para>
-
- <para>
- The first time you select an Album you may have to wait
briefly while the thumbnails are generated.
- </para>
-
- <para>
- Information about each photograph is displayed below each
thumbnail. You can control what information is displayed from the
- <menuchoice>
- <guimenu>Settings</guimenu>
- <guimenuitem>Configure &digikam;</guimenuitem>
- </menuchoice>
- dialog. Select the <guilabel>Album View</guilabel> page and
look for the <guilabel>Icon-View Options</guilabel> section.
- </para>
-
- <para>
- The thumbnails have <firstterm>Tool Tips</firstterm> which
will pop up if you allow the mouse to dwell over a thumbnail for a moment. The
Tool Tip shows the most important properties of the photograph including any
tags that you have applied.
- </para>
-
- <para>
- <screenshot><mediaobject><imageobject><imagedata
fileref="&path;using-mainwindow-tooltip.png" format="PNG" />
</imageobject></mediaobject></screenshot>
- </para>
-
- <para>
- The content of the Tool Tips can be configured in the Tool Tip
section of
-
- <menuchoice>
- <guimenu>Settings</guimenu>
- <guimenuitem>Configure &digikam;</guimenuitem>
- </menuchoice>
- </para>
-
- <para>
- As an alternative you can display the photographs in a table
by hitting the <menuchoice><guimenu>Table</guimenu></menuchoice> button on the
Main Toolbar or by selecting
<menuchoice><guimenu>View</guimenu><guimenuitem>Table</guimenuitem></menuchoice>
menu from the menu bar. This allows to see a lot of photographs at the same
time (Tip: leave away the thumbnail column) in a way you can customize the
usual way by right-clicking on the headline bar and choose the information you
want to see. Left-clicking on a line in the table will open the preview of that
photograph.
- </para>
-
- <para>
- You can access most of the functions that &digikam; can
perform on a photograph by right-clicking the thumbnail or line in the table
(context menu) or by selecting from the
<menuchoice><guimenu>Item</guimenu></menuchoice> menu in the menu bar.
- </para>
-
- </sect3>
-
- <sect3 id="using-imageviewing">
- <title>Viewing an image</title>
-
- <para>
- There are several possibilities to view an image. You can
either click on it, select
- <menuchoice>
- <shortcut><keycombo
action="press"><keycap>F3</keycap></keycombo></shortcut>
-
<guimenu>Image</guimenu><guisubmenu>View</guisubmenu><guimenuitem>Preview
Image</guimenuitem>
- </menuchoice>
- from the menu bar or select <guilabel>View</guilabel> from the
context menu. The Preview Area will open and the Icon Area will be reduced to
one line. For viewing it larger, click the sidebars away (by just clicking on
the active button on them). An even larger view you can achieve by clicking the
<quote>Show Fullscreen</quote> icon
- <inlinemediaobject>
- <imageobject><imagedata
fileref="&path;using-mainwindow-icon-fullscreen.png" format="PNG"/>
</imageobject>
- </inlinemediaobject>
- either on the thumbnail or on the preview. While viewing
images you can take action from the context menu at any time (not in fullscreen
mode). To close the preview, just click again or press
- &Esc;
- or
- <keycap>F3</keycap>
- or click the
- <menuchoice><guimenu>Table</guimenu></menuchoice> or
- <menuchoice><guimenu>Thumbnails</guimenu></menuchoice> button.
- </para>
-
- <para>
- </para>
-
- <para>
- <mediaobject>
- <imageobject><imagedata
fileref="&path;using-mainwindow-preview.png" format="PNG"/></imageobject>
- </mediaobject>
- </para>
-
- <para>
- You can also view your images in a slideshow using the
<quote>Slideshow</quote> drop down menu from the Main Toolbar. You have the
choice to start a slideshow with a selection of photographs, the whole content
of the folder (or search result) or even including all subfolders.
- </para>
-
- </sect3>
-
- <sect3 id="using-imageediting">
- <title>Editing a Photograph</title>
-
- <para>
- You can open the Image Editor on a photograph either clicking
the <guilabel>Image Editor</guilabel> button on the Main Toolbar or by
selecting
- <menuchoice>
- <shortcut><keycap>F4</keycap></shortcut>
-
<guimenu>Item</guimenu><guimenuitem>Open...</guimenuitem>
- </menuchoice>
- from the menu bar or by right-clicking and selecting
<guilabel>Open...</guilabel> from the context menu. See the <link
linkend="editor-using">&digikam; Image Editor</link> section for instructions
on how to edit your photographs. The Image Editor offers a wide range of tools
to enhance, decorate and/or modify your photographs.
- </para>
-
- </sect3>
-
- <sect3 id="using-externalapp">
- <title>Viewing or Editing a Photograph With Another Application</title>
-
- <para>
- Sometimes &digikam; may not provide all of the capabilities
you need. You can open a photograph in another application by right-clicking on
it and selecting from the <guilabel>Open With...</guilabel> sub-menu (At the
moment this function is available only under &Linux;). The list of applications
that appear in this menu is controlled by the standard desktop file
associations for the image format type of this photograph. Consult the desktop
manual for instructions on changing these file associations if the application
that you need is not listed.
- </para>
-
- <para>
- Note that there can be a problem with meta-data embedded in
photographs when they are edited by other image manipulation applications. Some
applications do not retain the photograph's meta-data when you save a modified
image. This means that if you modify a photograph using one of these programs
you will lose information such as orientation, aperture &etc; that are stored
in the EXIF and IPTC tags.
- </para>
-
- </sect3>
-
- <sect3 id="using-rotateimage">
- <title>Lossless Image Rotation</title>
-
- <note><para>
- There is a difference between rotating a photograph in one of
the Views of &digikam; or in the Image Editor. The Image Editor uses a
different method of rotating an image, you may not notice any difference but
the Image Editor method can cause some loss of quality in the photograph when
saving the picture as JPEG. The rotation methods described here preserve the
original quality of the photograph also in JPEG - Files.
- </para></note>
-
- <para>
- &digikam; provides two ways to get your photographs the right
way up. The simplest method is to click one of the rotate icons on the
thumbnail or the preview or to right-click for the context menu and select
<guilabel>Rotate</guilabel> and then pick the direction of rotation needed.
- </para>
-
- <para>
- The second method to select
- <menuchoice>
- <guimenu>Item</guimenu><guimenuitem>Auto Rotate/Flip
Using EXIF Information</guimenuitem>
- </menuchoice>
- from the menu bar. Most digital cameras have an orientation
sensor. This sensor can detect how you hold the camera while taking an image.
It stores this orientation information inside the image. This meta data is
stored in an embedded meta-data section called EXIF. The cameras could rotate
the image themselves right away, but they have limited processing power, so
they leave this job to an application like &digikam;. If the camera is storing
the orientation, then &digikam; can use it to automatically rotate your
photographs so that they are the correct way up when you display them.
&digikam; will rotate the image on disk according to this orientation
information.
- </para>
-
- <para>
- The photograph is rotated without loss of quality and the
orientation information is set to normal, so that other EXIF-aware applications
will handle it correctly. The <link linkend="camerainterface.anchor">Import
Tool</link> can perform this operation automatically when it uploads the
photographs from your camera which will ensure that your photographs are always
the right way up. The rotate operation will do nothing if your camera does not
include this information in the photos.
- </para>
-
- </sect3>
-
- <sect3 id="using-renameimage">
- <title>Renaming a Photograph</title>
-
- <para>
- You can change the filename for a photograph by right-clicking a
thumbnail and selecting
- <menuchoice>
- <shortcut><keycap>F2</keycap></shortcut>
- <guimenu>Rename</guimenu>
- </menuchoice>. Remember to keep the file extension (.jpg,
.tif, &etc;).
- </para>
-
- <para>
- You can also batch rename photographs. One method is to use
the <link linkend="bqm.anchor">Batch Queue Manager</link> (B). Another one is
to select multiple photographs and then press <keycap>F2</keycap>. A dialog
will open showing the list of selected photographs with their current name and
the new name. These two are identical at first until you place the cursor in
the input field, type in something and/or select a modifier from the buttons
below. Make use of the tooltips!
- </para>
-
- </sect3>
-
- <sect3 id="using-deleteimage">
- <title>Deleting a Photograph</title>
-
- <para>
- When you delete a photograph from &digikam; with
- <menuchoice>
- <shortcut><keycombo
action="simul"><keycap>Del</keycap></keycombo></shortcut>
- <guimenu>Item</guimenu><guimenuitem>Move to Trash</guimenuitem>
- </menuchoice>
- it will be moved from its folder on the hard disk to the
internal Trash Can.
- </para>
-
- <para>Deleting works from anywhere in any &digikam; window.</para>
-
- </sect3>
-
- </sect2>
-
- <sect2 id="using-myalbumsview">
- <title>Albums View</title>
-
- <para>
- <mediaobject>
- <imageobject><imagedata
fileref="&path;using-mainwindow-albumview.png" format="PNG" /></imageobject>
- </mediaobject>
- </para>
-
- <para>
- By clicking the <quote>Albums</quote> button on the left side bar
you toggle the <quote>Albums</quote> tree which provides an organized view of
your photograph albums. The top item <quote>Albums</quote> just shows the
<quote>welcome to &digikam;</quote> screen in the view area. The next level of
the <quote>Albums</quote> tree shows your different Collections (marked by the
<inlinemediaobject><imageobject><imagedata
fileref="&path;using-mainwindow-icon-collection.png" format="PNG"
/></imageobject></inlinemediaobject> icon) or at least one if you haven't added
one or more yet in the <menuchoice><guimenu>Settings</guimenu>
<guimenuitem>Configure &digikam;...</guimenuitem></menuchoice> Collections
section. Each Collection represents a folder branch on your hard disk, on
removable media or on network shares and the next levels in the tree show the
structure of those folders, here called <quote>Albums</quote>. The albums can
be sorted by their folder layout on the hard disk, by the Category that has
been set in the <link linkend="albumpropsedit.anchor">Album Properties</link>
or by the Date of that Albums (this date can also be changed in the Properties
of each Album). You can invert the sort order (ascending/descending) by
clicking on the title bar of the album tree.
- </para>
-
- <para>
- You can switch between these sort orders using <guimenuitem>Sort
Albums</guimenuitem> from the <guimenu>View</guimenu> menu.
- </para>
-
- <sect3 id="using-createnewalbum">
- <title>Creating a New Album</title>
-
- <para>
- There are a number of ways to create a new Album. You can
create a new Album when you upload new photographs from the Camera using
<menuchoice><guimenu>Import</guimenu>
<guimenuitem>Cameras</guimenuitem></menuchoice>. You can also create a new
empty Album with <menuchoice><guimenu>Album</guimenu>
<guimenuitem>New...</guimenuitem></menuchoice> (Ctrl+N) in the
<quote>Albums</quote> view. As an additional option, you can create a new Album
by importing an existing folder of photographs from your computer; just select
<menuchoice><guimenu>Import</guimenu> <guimenuitem>Add
Folders...</guimenuitem></menuchoice> from the menu bar and select the folder
that you want to import. An Album will be created with the same name as the
hard disk folder. You can use drag and drop to import a folder. Drag a folder
icon, for example from a &konqueror; window. Then drop it on the album list on
the left. A menu will appear that gives you the option to move or copy the
folder into &digikam;.
- </para>
-
- </sect3>
-
- <sect3 id="using-deletealbum">
- <title>Deleting an Album</title>
-
- <para>
- When you delete an Album from &digikam; it will be moved into
the internal Trash Can. As an option you could change this behavior, so that
delete really will remove the Album and all of the photographs in it. This can
be changed by selecting
<menuchoice><guimenu>Settings</guimenu><guimenuitem>Configure
&digikam;</guimenuitem></menuchoice> and selecting the Miscellaneous page. At
the top of this page are the settings that control what happens when a
photograph is deleted. To delete an Album right-click the Album in the
<quote>Albums</quote> tree and select Delete Album from the context menu.
- </para>
-
- </sect3>
-
- <sect3 id="using-addphototoalbum">
- <title>Adding a Photograph to an Album</title>
-
- <para>
- Most of the time you will create new Albums and populate them
with photographs directly from your camera using the Camera Tool. However,
sometimes you may want to add a photograph that you already have on your
computer to an existing Album. To add a photograph to an Album select
<menuchoice><guimenu>Import</guimenu> <guimenuitem>Add
Images...</guimenuitem></menuchoice> (Ctrl+Alt+I) from the menu bar. Select a
source folder from the dialog and click OK. An import window will open. Select
the photographs that you want to add and choose <guilabel>Download
Selected</guilabel> from the <quote>Download</quote> drop down menu. A dialog
will open where you can choose the destination album. The photographs will be
copied into the Album. <guilabel>Download New</guilabel> (Ctrl+N) from the same
menu will copy only those images which are not in the destination folder yet.
- </para>
-
- <para>
- Additionally, you can use drag and drop to import photographs.
Drag the photographs icons, for example from a &dolphin; window. Then drop it
on the image list on the right hand side.
- </para>
-
- <para>
- If you have a scanner configured, you can also scan a
photograph straight into an Album. Select
- <menuchoice><guimenu>Import</guimenu>
- <guimenuitem>Import from Scanner...</guimenuitem></menuchoice>.
- </para>
-
- </sect3>
-
- <sect3 id="using-movecopyitem">
- <title>Moving or Copying Photographs Between Albums</title>
-
- <para>
- Simply drag the photograph and drop it on the destination
Album to move or copy it from one Album to another. A menu will appear that
gives you the option to <guilabel>Move</guilabel> or <guilabel>Copy</guilabel>
the photograph. You can move or copy multiple photographs the same way, just
select all the photographs that you want to move and drag them on to the
destination Album.
- </para>
-
- </sect3>
-
- <sect3 id="using-managealbums">
- <title>Managing Albums</title>
-
- <anchor id="albumpropsedit.anchor"/>
-
- <para>
- Album Properties can help you remember which kind of photographs
are in an Album and can also help you to organize the <quote>Albums</quote>
tree. To access the Album Properties right-click on an Album and select
<guilabel>Properties</guilabel> (Alt+Return) from the context menu.
- </para>
-
- <para>The Album Properties dialog allows you to set:</para>
-
- <example>
- <title>The Album Properties Dialog</title>
- <screenshot><mediaobject><imageobject><imagedata
fileref="&path;using-mainwindow-albumproperties.png" format="PNG" />
</imageobject></mediaobject></screenshot>
- </example>
-
- <itemizedlist>
-
- <listitem><para>The Album <guilabel>Title</guilabel> : Name of
the Album, identical with the name of the folder on your hard disk. If you edit
it here, the folder will also be renamed.
- </para></listitem>
-
- <listitem><para>The Album <guilabel>Category</guilabel> : this
is a way of grouping your Albums together by a common label. The Category you
set will be used to order your albums when you select <guilabel>By
Category</guilabel> from the drop down box in the tool bar or using
<menuchoice><guimenu>View</guimenu><guimenuitem>Sort
Albums</guimenuitem><guimenuitem>By Category</guimenuitem></menuchoice>. If you
want to add and delete Category labels, choose from the menu
<menuchoice><guimenu>Settings</guimenu><guimenuitem>Configure
&digikam;</guimenuitem></menuchoice> and here the Album Category section.
- </para></listitem>
-
- <listitem><para>The <guilabel>Caption</guilabel> for the Album
: Usually a short description of the content, but of course you are free to
abuse it in any conceivable way. But beware: this will be shown in the banner
at the top of the main Image Window ;-)
- </para></listitem>
-
- <listitem><para>The Album <guilabel>Date</guilabel> : this
will be used when you order your Albums by date using
<menuchoice><guimenu>View</guimenu><guimenuitem>Sort
Albums</guimenuitem><guimenuitem>By Date</guimenuitem></menuchoice>.
- </para></listitem>
-
- <listitem><para><guilabel>Oldest, Average, Newest</guilabel>
buttons : these will set the <guilabel>Date</guilabel> to the oldest, average
or latest date of the images in that album. It will first try to calculate the
average date of the images in the album based on the EXIF-headers. If that
fails it will fall back to the modification date of the files in that folder.
- </para></listitem>
-
- </itemizedlist>
-
- </sect3>
-
- <sect3 id="using-setalbumicon">
- <title>Setting the Album Icon</title>
-
- <para>
- &digikam; displays the usual folder icon in the
<quote>Albums</quote> list. You can choose one of your photographs instead.
This may help you to remember what kind of photographs are contained in an
Album.
- </para>
-
- <para>
- To select a photograph as the Album icon, right-click on the
photograph that you want to use as the Album icon and select <guimenuitem>Set
as Album Thumbnail</guimenuitem> from the context menu. Additionally you can
use drag and drop to set the Album icon. Drag the photographs icon from the
thumbnail area and drop it on the currently selected Album in the Album list.
- </para>
-
- <note>
- <para>
- An Album can only be in one Album Collection and Album Collections
cannot be nested.
- </para>
-
- <para>
- &digikam; also supports tagging individual photographs. Album
Categories are different from photograph tagging because the Album Category
applies to all the photographs in an Album rather than to individual
photographs. You can use both Album Category and tagging to organize your
photographs.
- </para>
- </note>
-
- </sect3>
-
- </sect2>
-
- <sect2 id="using-mytagsview"> <title>Tags View</title>
-
- <para>
- (Hierarchical) tagging provides a flexible and powerful way to
organize and catalog your images. Tags (also called <quote>keywords</quote> in
other applications) are labels that can be applied to individual images or
whole groups. Once a tag has been set to an image the image can be found again
by selecting the tag or doing a search.
- </para>
-
- <para>
- Tags can be arranged in a hierarchical tree. This allows you to
organize your tags in a logical manner. You can collapse parts of the tree in
the <quote>Tags</quote> list so that you can easily find the tags that you are
looking for.
- </para>
-
- <para></para>
-
- <para>
- <mediaobject>
- <imageobject><imagedata
fileref="&path;using-mainwindow-tagsview.png" format="PNG" /></imageobject>
- </mediaobject>
- </para>
-
- <para>
- When a tag is selected in the Left Sidebar, all of the images that
are marked with that tag are displayed in the View Area.
- </para>
-
- <para>
- But before assigning and using tags you first have to define them.
If you import photographs with tags assigned &digikam; will build an
appropriate tag tree during import. Other than that you have to define tags by
yourself. An easy access to that is the context menu shown in the screenshot
above.
- </para>
-
-
-
- <sect3 id="using-managetags"> <title>Managing Tags</title>
-
- <para>
- You can add new tags by right-clicking on either the
<quote>Tags</quote> label or an existing tag and selecting <guilabel>New
Tag...</guilabel>. A dialog will open where you can type in the tag name (or
even a whole hierarchy branch), assign an icon and/or a shortcut to the tag. If
you add a new tag by right-clicking on an existing tag, your new tag will be
created as a sub-tag.
- </para>
-
- <para>
- You can delete a tag by right-clicking on the tag you want to
delete and selecting <guilabel>Delete Tag</guilabel>. When you delete a tag,
the photographs themselves are not deleted. Simply the tag is removed from
those photographs.
- </para>
-
- <para>
- You can move the position of a tag within the tree by dragging
it to the position that you want and dropping it there. A menu will appear that
gives you the option to
- <guilabel>Move</guilabel> the tag. This works from the left
and right sidebar. A tag can only be in one place in the tree at a time.
- </para>
-
- <para>
- You can set the Tag Properties by right-clicking on a tag and
selecting <guilabel>Properties...</guilabel>. The Tag Properties allow you to
change the name of the tag, the icon used in the Tags tree and the shortcut.
- </para>
-
- <para>
- To select a photograph as the tag icon, right-click on the
photograph that you want to use as the tag icon and select <guilabel>Set as Tag
Thumbnail</guilabel> from the context menu. Additionally you can use drag and
drop to set the tag icon. Drag the images icon and drop it on the currently
selected tag in the tag list.
- </para>
-
- <para>
- A tool for more elaborate work on big tag trees is the <link
linkend="using-tagsmngr">Tags Manager</link> which you can access by clicking
the <guilabel>Open Tag Manager</guilabel> button at the top of the Tags tree.
- </para>
-
- <para>
- In the <link linkend="keywords">Digital Asset Management
(DAM)</link> chapter of this handbook you can find some useful considerations
about how to build your Tags tree.
- </para>
-
- <para>
- It is not always easy to build a logical hierarchy from
general and generic categories. You might run into a problem like this:
- </para>
-
- <blockquote><screen>
- Animal
- - Domestic Animal
- - Cat
- - Cattle
- - Dog
-
- - Wild Animal
- - Bird
- - Cat
- - Cheetah
- - Lion
- - Tiger
-
- - Zoo Animal
- - Bird
- - Cat
- - Cheetah
- - Leopard
- </screen></blockquote>
-
- <para>
- In this tag tree the keyword <quote>Cat</quote> appears three
times. This will not cause a problem within &digikam; but there are quite a few
views where the user cannot know which of the three is applied to an image
because he might not be able to see the whole hierarchy of the tag. A help
could be to tag the image in a case like this also with the parent tag or even
the whole hierarchy but it becomes quite unwieldy, ⪚ in the image icon if
you have the tags displayed there. The second <quote>Cat</quote> can be avoided
by calling it <quote>Wild Cat</quote> but calling the third one <quote>Zoo
Cat</quote> is a bit out of the roof, I think. And still: there are also two
<quote>Cheetah</quote>!
- </para>
-
- <para>
- Solution: You replace the <quote>Zoo Animal</quote> branch by
a single tag <quote>Zoo</quote> which you use in addition to the tag you choose
from the two remaining branches. You could even put it on the top level of your
hierarchy if you have photographs taken in a zoo but not showing animals.
- </para>
-
- </sect3>
-
- <sect3 id="using-taggingimages"> <title>Tagging Photographs</title>
-
- <para>
- Before you can get the most out of &digikam;'s tagging
capabilities, you must first tag your photographs. There are a few methods for
that task. Once you have identified the photographs that you want to tag you
can either drag and drop them onto the tag in the Tags tree or, by
right-clicking on the selected photographs in the Image Window, you can use the
<guilabel>Assign Tag</guilabel> menu to select the tags you wish to set.
- </para>
-
- <para>
- Drag and Drop: works with both sidebars provided they are
showing tags of course. With the Right Sidebar it works the obvious way: you
drag the tag and drop it onto the photograph or selection of photographs you
want to tag. With the Left Sidebar you have to drag the photographs to the
tags. You want to know why? Just try it the other way and you will see :-)
- </para>
-
- <para>
- Shortcuts: as mentioned earlier in this chapter you can assign
keyboard shortcuts in the Tag Properties. With these you can assign or
un-assign a tag to the selected photograph(s).
- </para>
-
- <para>
- Context menu: by right-clicking on the selected photographs
and choosing <guilabel>Assign Tag</guilabel> you will see the next menu step
offering the ten most recently used tags, <guilabel>Add New Tag...</guilabel>,
described at the beginning of the previous <link
linkend="using-managetags">article</link>, and <guilabel>More
Tags...</guilabel> which leads to what is described in the next paragraph. The
context menu method is obviously very useful if you use only a limited number
of tags out of your whole tree for a while.
- </para>
-
- <example>
- <title>Tagging Image with context menu</title>
- <mediaobject>
- <imageobject><imagedata
fileref="&path;using-mainwindow-assigntags.png" format="PNG" /></imageobject>
- </mediaobject>
- </example>
-
- <para>
- You can remove a tag from a photograph by right-clicking on
the photograph and using the <guilabel>Remove Tag</guilabel> menu. This menu
will only show those tags that have been set on this photograph.
- </para>
-
- <para>
- The Right Sidebar: this is what I would call my standard
method for assigning tags. Click <guilabel>Captions/Tags</guilabel> on the
Right Sidebar and then the <guilabel>Tags</guilabel> tab and you will see the
whole tags tree. Simply check/un-check the boxes of the tags you want to
assign/un-assign and then click <guilabel>Apply</guilabel>. If you change focus
without that you will be asked whether you want to apply the changes unless you
disabled that confirmation either by checking <quote>Always apply changes
without confirmation</quote> or by checking <quote>Do not confirm when applying
changes in the right sidebar</quote> in the Miscellaneous section of
<menuchoice><guimenu>Settings</guimenu> <guimenuitem>Configure
digiKam...</guimenuitem></menuchoice>. More details about the other buttons and
fields in the <guilabel>Tags</guilabel> tab see in <link
linkend="using-sidebar-tags">&digikam; sidebar</link>.
- </para>
-
- <para>
- You can label a photograph with as many tags as you like. The
photograph will appear when you select any of the tags that are set against it.
This way you can set a tag for each person in a photograph, as well as the
place the photograph was taken, the event it was taken at, &etc;
- </para>
-
- <para>
- Once you have tagged a photograph, the tag name will appear
under the thumbnail in the Image Area.
- </para>
-
- <tip>
- <para>
- Tags are stored in a database for fast access, and, the
applied tags are written into IPTC data fields of the image (at least for
JPEG). So you can use your tags with other programs or, in case of loss of that
data in the database, the tags will be re-imported when the image is noticed by
&digikam;.
- </para>
- </tip>
-
- </sect3>
-
- </sect2>
-
- <sect2 id="using-mylabelsview"> <title>Labels View</title>
-
- <para>
- The Labels View allows you to select photographs by the Rating,
Pick and Color labels you assigned to them previously either by using the
context menu of a thumbnail or the <guilabel>Description</guilabel> tab of the
<guilabel>Captions/Tags</guilabel> section on the Right Sidebar.
- </para>
-
- <para>
- <mediaobject>
- <imageobject><imagedata
fileref="&path;using-mainwindow-labelsview.png" format="PNG" /></imageobject>
- </mediaobject>
- </para>
-
- <para>
- You may select more than one label by <keycombo
action="simul">&Ctrl;<mousebutton>left</mousebutton></keycombo> click. The
selected labels are connected by boolean AND, ⪚ selecting Four Star and
Yellow will display only photographs that have <emphasis>both</emphasis> labels
assigned. You can perform even more sophisticated searches by using the
<guilabel>Filters</guilabel> section of <link
linkend="using-sidebar-filters">The Right Sidebar</link>.
- </para>
-
- </sect2>
-
- <sect2 id="using-mydatesview"><title>Dates View</title>
-
- <para>
- <mediaobject>
- <imageobject><imagedata
fileref="&path;using-mainwindow-dateview.png" format="PNG" /></imageobject>
- </mediaobject>
- </para>
-
- <para>
- The Dates View organizes your photographs based on their dates.
&digikam; uses either the
- EXIF date or, if no EXIF date is available, the last modification
time of the file.
- </para>
-
- <para>
- When you select a month from the list, all images from that month
are displayed in the Image Area.
- You can select days or weeks in the date sheet at the bottom of
the Left Sidebar to show only the images from the selected dates.
- </para>
-
- </sect2>
-
- <sect2 id="using-mytimelineview"> <title>Timeline View</title>
-
- <para>
- The Timeline View shows a timescale-adjustable histogram of the
numbers of images per time unit which is selectable by a drop down field. To
the right of that you can choose between a linear or logarithmic histogram. A
selection frame moves over the histogram. To display the photographs out of a
certain time frame just click on the corresponding bar. You are not restricted
to one bar. With <keycombo
action="simul">&Shift;<mousebutton>left</mousebutton></keycombo> click or
<keycombo action="simul">&Ctrl;<mousebutton>left</mousebutton></keycombo> click
you can add more bars to the first one.
- </para>
-
- <para>
- <mediaobject>
- <imageobject><imagedata
fileref="&path;using-mainwindow-timeline.png" format="PNG" /></imageobject>
- </mediaobject>
- </para>
-
- <para>
- In the field right below you can enter a title and save your
selection. It will then appear in the <quote>Searches</quote> list field below.
But the best is still to come: the Timeline View offers a search for a search!
If you have a lot more searches saved than my ridiculous four in the screenshot
the adaptive search field at the bottom may help to find a certain search.
- </para>
-
- </sect2>
-
- <sect2 id="using-mysearchesview"> <title>Search View</title>
- <para>
- We talked about quite a few views already and their searching
capabilities, which are all kind of specialized. The Search View now offers a
more versatile and general way of searching. There are two different approaches.
- </para>
-
- <para>
- <mediaobject>
- <imageobject><imagedata
fileref="&path;using-mainwindow-searchview.png" format="PNG" /> </imageobject>
- </mediaobject>
- </para>
-
- <sect3> <title>The Quick Search</title>
- <anchor id="quicksearchtool.anchor"/>
-
- <para>
- Quick Search is the adaptive search box at the top of the
search dialog (Left Sidebar) and provides you with a simple means to search the
&digikam; database with a single query. You can enter any arguments in the
<guilabel>Search:</guilabel> text field and it will be used to determine the
results. For instance, you can enter the string 'birthday' to search the
complete database for occurrences of the word 'birthday' in all metadata text
fields, or '05.png' to search for a specific image file name '05.png' (no
escaping as in regexpressions needed).
- </para>
-
- <para>Search Properties:
- <itemizedlist>
- <listitem><para>searches are case
insensitive</para></listitem>
- <listitem><para>blank separated search terms are boolean
AND combinations</para></listitem>
- <listitem><para>special characters are literal and not
interpreted ( . * ? / &etc;)</para></listitem>
- <listitem><para>include all elements of the database:
names, rating, keywords, tags, albums, collections, dates (and more in the
future)</para></listitem>
- </itemizedlist>
- </para>
-
- <para>
- You can save your searches as a live folder that always
filters for what you entered as search criteria. Just type a name for the
search into the <guilabel>Save Current Search</guilabel> field and click the
save button to the right of it. When saved, the filter will appear in the
<guilabel>Searches</guilabel> list. By clicking the title bar of this list you
can invert the sorting order. Once you select one of your saved searches, the
search result will be presented in the Image Area immediately and the
<guilabel>Save Current Search</guilabel> field will convert into a
<guilabel>Edit Stored Search</guilabel> field where you can edit your search
criteria. The name of the saved search will be used to label the search result
in the Image Area.
- </para>
-
- <para>
- If you want to delete or rename a saved search from the list,
right-click on it and select from the context menu.
- </para>
-
- </sect3>
-
- <sect3 id="using-mainwindow-advancedsearchtool">
- <title>The Advanced Search Tool</title>
-
- <para>
- Advanced Search tool provides an extended search form which
can be used to search in specific fields of the &digikam; database in a more
sophisticated way. Click the <guilabel>Advanced Search...</guilabel> button and
it will come up like this:
- </para>
-
- <para>
- <mediaobject>
- <imageobject><imagedata
fileref="&path;using-mainwindow-advancedsearchtool.png" format="PNG"
/></imageobject>
- </mediaobject>
- </para>
-
- <para>
- The field labeled <quote>Find pictures that have associated
all these words:</quote> is just a duplicate of the Quick Search field.
- </para>
-
- <para>
- Click on one of the blue categories and there will fold out an
area with all the fields you can search for in that very category. Depending on
the kind of data each field contains different input fields for your search,
sometimes more than one type for the same field. Simplest are selection
buttons, ⪚ for colors. Then you have plain fields of the <quote>The
<replaceable>field content</replaceable> contains</quote> type, drop down lists
and checkboxes. Many fields have two input fields allowing you to define a
range, ⪚ <quote>Find pictures with a width between</quote>. And often you
find a link type thing called <quote>Any</quote> which opens a drop down field
with checkboxes for the possible contents of that field.
- </para>
-
- <example>
- <title>Advanced Search Criteria</title>
- <mediaobject>
- <imageobject><imagedata
fileref="&path;using-mainwindow-advancedsearchtool2.png" format="PNG"
/></imageobject>
- </mediaobject>
- </example>
-
- <para>
- Thanks to the labeling of the search fields they are pretty
much self explaining. What we have to talk about is how they work together if
you fill in or select more than one. On the right side of the header (blue area
at the top) you find a little link <quote>Options</quote>. If you click on that
one the header will change and you see four options.
- </para>
-
- <para>
- <itemizedlist>
- <listitem><para>
- <quote>Meet All of the following conditions</quote>
means that your different search parameters will be connected by boolean AND
for the search. Example: if you selected Album name <quote>Holidays</quote> and
color <quote>red</quote> the search will find all pictures labeled with
<quote>red</quote> out of the Album <quote>Holidays</quote>.
- </para></listitem>
-
- <listitem><para>
- <quote>Meet Any of the following conditions</quote>
means that your different search parameters will be connected by boolean OR for
the search. Example: if you selected Album name <quote>Holidays</quote> and
color <quote>red</quote> the search will find the content of the Album
<quote>Holidays</quote> <emphasis>and</emphasis> all pictures labeled with
<quote>red</quote> out of your whole collection.
- </para></listitem>
-
- <listitem><para>
- <quote>None of these conditions are met</quote> means
that your different search parameters will be connected by boolean NAND for the
search. Again our example: if you selected Album name <quote>Holidays</quote>
and color <quote>red</quote> the search will find all pictures of your
collection except those labeled with <quote>red</quote>
<emphasis>and</emphasis> except those out of the Album <quote>Holidays</quote>.
- </para></listitem>
-
- <listitem><para>
- <quote>At least one of these conditions is not
met</quote> means that your different search parameters will be connected by
boolean NOR for the search. One more example: if you selected Album name
<quote>Holidays</quote> and color <quote>red</quote> the search will find all
pictures of your collection except those labeled with <quote>red</quote> out of
the Album <quote>Holidays</quote>.
- </para></listitem>
- </itemizedlist>
- </para>
-
- <para>
- Complicated? No, good! Because the real stuff is yet to come.
Have a look at the footer of the Advanced Search Tool. Here you find
<guilabel>+ Add Search Group</guilabel>. If you hit this button another list
with the same categories of search fields will open below the first one (scroll
down in case you don't see it right away) separated by a blue header showing
the same options we were just talking about. On top of them you see an
underlined OR meaning that this list is connected to the first one by boolean
OR. You can change that to AND by clicking on it.
- </para>
-
- <para>
- To explain how it works let's make another example based on
one of those we had already. I want to use the second one. That means: in the
first group you checked <quote>Meet Any of the following conditions</quote> and
you selected Album name <quote>Holidays</quote> and color <quote>red</quote>.
As we said already this will produce all pictures labeled with
<quote>red</quote> out of your whole collection <emphasis>and</emphasis> the
content of the Album <quote>Holidays</quote>. Now let's assume for some reason
you want to exclude all rejected files and all files with a rating lower than
three stars. So you open a second group, click on the underlined OR in the
header in order to change it to AND, select <quote>None of these conditions are
met</quote>, fold out the <quote>Picture Properties</quote>, check under
<quote>Labels</quote> the red flag (rejected) and select under
<quote>Rating</quote> no star (five white stars) in the first field and two
stars in the second field. Note that there is a difference between <quote>no
star</quote> and <quote>No Rating assigned</quote>! If you want to exclude the
pictures without any rating as well you got to open another Search Group, click
on the underlined OR in the header in order to change it to AND, select
<quote>None of these conditions are met</quote> and select <quote>No Rating
assigned</quote> in the <quote>Picture Properties</quote> category.
- </para>
-
- <para>
- Which brings us to the fact that you can open as many
additional Search Groups as you need to formulate your query. But since the
purpose of this handbook is not to open a competition in creating the most
sophisticated queries I leave it to you to figure out how far you have to go or
can go in this respect and rather finish this section with a few hints about
the other buttons in the Advanced Search Tool. Beside the <guilabel>+ Add
Search Group</guilabel> button you see <guilabel>Reset</guilabel>. This removes
all additional Search Groups and clears all the fields in the remaining one.
It's a good policy to use this button before starting to create a new search,
in particular when you leave the Advanced Search Tool with the intention to use
the Quick Search for your next query, because otherwise the search criteria
remain active even if you don't see them and screw up your new search.
<guilabel>Try</guilabel> carries out the search but leaves the Advanced Search
Tool window open, <guilabel>OK</guilabel> does the same but closes the window.
<quote>Remove Group</quote> in the header of the additional Search Groups
doesn't need an explanation, I think.
- </para>
-
- </sect3>
-
- </sect2>
-
- <sect2 id="fuzzy-searches"> <title>Fuzzy View</title>
-
- <para>
- &digikam; characterizes every image by a lengthy number using
a special technique (Haar algorithm) that makes it possible to compare images
by comparing this calculated signature. The less numerical difference there is
between any two image signatures, the more they resemble each other. This
technique has three implementations in &digikam;:
- </para>
-
- <itemizedlist>
-
- <listitem>
- <para>
- Duplicates: before you can have &digikam; finding
duplicates the signatures (or fingerprints) have to be calculated. You can
start that process with the button <guilabel>Update fingerprints</guilabel>
which initiates a total rebuild of the image signatures (may take hours if you
have a large collection, an estimate is 2 hours for 10'000 images). Once the
fingerprints are calculated you can use <guilabel>Find duplicates</guilabel>,
but it will take a long time too as it has to compare every image with any
other image. So the way to go in both cases is to confine your search to
certain albums and/or tags. With the Similarity threshold you can narrow down
or enlarge the search result.
- </para>
-
- <example>
- <title>Find duplicates while restricting to an
album</title>
- <mediaobject>
- <imageobject><imagedata
fileref="&path;using-mainwindow-duplicates-albumsfilter.png" format="PNG"
/></imageobject>
- </mediaobject>
- </example>
- </listitem>
-
- <listitem>
- <para>
- Image (Similar items): This is a drag&drop zone
where you can drop any image to find a similar one. Drag an image from anywhere
over the fuzzy search icon in the left sidebar, it will open and you drop it
there or use <guilabel>Find Similar...</guilabel> from the context menu of a
thumbnail in any other view. You can narrow down or enlarge the resulting
selection with a threshold here as well. In the field below you can enter a
name for the search and save it. In the searches list below you find your saved
searches. Clicking on the title bar of that list toggles the sorting order
between ascending and descending. At the bottom you find an adaptive search
field which can help you to find a particular search.
- </para>
-
- <example>
- <title>Fuzzy search for similar image</title>
- <mediaobject><imageobject><imagedata
fileref="&path;using-mainwindow-searchsimilar.png" format="PNG"
/></imageobject></mediaobject>
- </example>
- </listitem>
-
- <listitem>
- <para>
- Sketch: free hand color sketching: draw a quick sketch
and &digikam; will find corresponding images. You will find the same means to
save your search as in the <guilabel>Image</guilabel> tab.
- </para>
-
- <example>
- <title>Fuzzy search by sketch</title>
- <mediaobject>
- <imageobject><imagedata
fileref="&path;using-mainwindow-searchsketch.png" format="PNG" /></imageobject>
- </mediaobject>
- </example>
- </listitem>
-
- </itemizedlist>
- </sect2>
-
-
- <sect2> <title>People View</title>
-
- <para>
- As long as you are not just taking pictures from machines or stars
or something like that, Face Management might be an interesting feature for you
(even with a machine there might be a human being operating it). In &digikam;
it consists of two tasks: Face Detection and Face Recognition.
- </para>
-
- <sect3> <title>Face Detection</title>
-
- <para>
- The first step is to have &digikam; finding all those pics
that show faces not even knowing yet who's face it is. To prepare that process
you click <guilabel>Scan collection for faces</guilabel> which will open the
Scanning faces dialog. Right under the header you have a drop down menu where
you can choose between
- <itemizedlist>
- <listitem>
- <para>Skip images already scanned</para>
- </listitem>
- <listitem>
- <para>Scan again and merge results</para>
- </listitem>
- <listitem>
- <para>Clear unconfirmed results and rescan</para>
- </listitem>
- </itemizedlist>
- </para>
-
- <para>
- The first one you would choose if you didn't scan yet or if
you did with a satisfying result but added new photographs since then or if you
already improved a search result, ⪚ by removing face tags which obviously
don't show a face. The second you would choose if you want the images already
scanned to be included in the next scan. The third is more interesting in the
context of Face Recognition since <quote>unconfirmed results</quote> means face
tags that don't have a name assigned to them yet.
- </para>
-
- <para>
- For the task we are talking about you check <guilabel>Detect
faces</guilabel>, of course. Since face detection is a time-consuming task you
better <emphasis>don't</emphasis> hit <guilabel>Scan</guilabel> right away,
rather <guilabel>Options</guilabel>. An additional area will fold out organized
with three tabs. In <guilabel>Albums</guilabel> you can confine the scan to
certain albums or tags. In <guilabel>Parameters</guilabel> you can try to find
a balance between speed and accuracy that suits your needs. Under
<guilabel>Advanced</guilabel> you will find two checkboxes. The first is
explained by the text above it. The second is for face recognition, see next
article.
- </para>
-
- <para>
- Once you have chosen your options carefully you click
<guilabel>Scan</guilabel> and after a while, depending on the scope of your
selection, the result will be presented in the Image Area. In the Tags list of
the Left Sidebar you will see the People branch of your tag tree. You will see
the whole scan result only if the topmost tag <quote>People</quote> is
selected. In the tree you will see a new virtual tag called
<quote>Unknown</quote> which will show all those images where faces are
recognized but not yet connected to a person. If you just scanned for the first
time you will find the whole result also here.
- </para>
-
- <para>
- <example>
- <title>Face Detection result</title>
- <mediaobject>
- <imageobject><imagedata
fileref="&path;using-mainwindow-facedetection.png" format="PNG" /></imageobject>
- </mediaobject>
- </example>
- </para>
-
- <para>
- Note that the thumbnails presented here are not showing the
whole image. They show the area of the image where the scan algorithm put down
a <firstterm>Face Tag</firstterm>. You can see that if you click on the
thumbnail. In the preview that opens you will see the whole image with all the
face tags on them. If you don't see them, click the
- <inlinemediaobject>
- <imageobject><imagedata
fileref="&path;using-mainwindow-icon-showfacetags.png" format="PNG"
/></imageobject>
- </inlinemediaobject>
- button in the upper left corner of the preview. If there is
more than one face tag on the image it will also be represented by more than
one thumbnail. In the screenshot above this is the case with the two topmost
thumbnails.
- </para>
-
- <para>
- <mediaobject>
- <imageobject><imagedata
fileref="&path;using-mainwindow-facedetectiontag.png" format="PNG"
/></imageobject>
- </mediaobject>
- </para>
-
- <para>
- This screenshot image have been chosen because it shows one
important issue: the algorithm will find inevitably details in an image that
resemble a face but are actually something else. That's what the
<guilabel>Remove</guilabel> button is for. It will remove the face tag from the
photograph and if it is the only face tag (left) the photograph will disappear
from the scan result.
- </para>
-
- <para>
- If it really is a face the field labeled "Who is this?" comes
into play. Here you can either type in the name of an existing People tag out
of your tag tree or use the drop down function to show your tag tree and select
a tag. With <guilabel>Confirm</guilabel> you can save that to the database. If
it was the only face tag (left) the image will disappear from the
<quote>Unknown</quote> selection and you will find it once you select either
the <quote>People</quote> tag or one of the tags you assigned to one of the
face tags in that image.
- </para>
-
- <para>
- In the context menu of the preview there are two more items
related to face tags: <guilabel>Add a Face Tag</guilabel> and <guilabel>Clear
all faces on this image</guilabel>.
- </para>
-
- </sect3>
-
- <sect3> <title>Face Recognition</title>
-
- <para>
- Assigning People tags to face tags is an important
prerequisite to Face Recognition. Very obviously &digikam; can only recognize
faces if it has something to compare with. So it's up to you to show it the
ropes, which means in this case to tell &digikam;: This is Lara, this is Juan,
this is Peter and so forth. For that you would, after performing a Face
Detection as described in the previous article, typically select the
<quote>unknown</quote> tag on the Left Sidebar, click on a thumbnail and click,
if necessary, on the
- <inlinemediaobject>
- <imageobject><imagedata
fileref="&path;using-mainwindow-icon-showfacetags.png" format="PNG"
/></imageobject>
- </inlinemediaobject>
- (Show Face Tags) button. Now you should see the face tags of
that photograph. Those which have a people (or other) tag already assigned will
simply show the name of that tag. The others, showing <quote>unknown</quote>
faces, will show a field and two buttons as in the screenshot of the previous
article. In the field labeled "Who is this?" you can either type in the name of
an existing People tag out of your tag tree or use the drop down function to
show your tag tree and select a tag. With <guilabel>Confirm</guilabel> you can
save that to the database.
- </para>
-
- <para>
- If a face tag is confirmed and thus showing only the name of
the tag but not the buttons to remove, edit or confirm it, but you need this
buttons because ⪚ it's wrong and you want to edit or remove it, just
double-click on the name and the buttons will re-appear.
- </para>
-
- <para>
- Once you have a tag assigned to a few photographs you can have
&digikam; looking if it can find more photographs showing the same face. To
prepare that process you click <guilabel>Scan collection for faces</guilabel>
but his time you select <guilabel>Recognize faces</guilabel>.
- </para>
-
- <para>
- Face Recognition is faster than Face Detection but it still
makes sense to click <guilabel>Options</guilabel> and confine the scan to
certain albums or tags in the <guilabel>Albums</guilabel> tab, ⪚ to the
"Unknown" tag. In the <guilabel>Parameters</guilabel> tab we can play with the
balance between speed and accuracy. Under <guilabel>Advanced</guilabel> you
will find two checkboxes. The first is explained by the text above it.
- </para>
-
- <para>
- In case of unsatisfying results it might be helpful to use
<guilabel>Clear and rebuild all training data</guilabel>. One reason can be
that there are too many face tags assigned to a person which shows this person
in a way that doesn't really help the search algorithm, ⪚ with sunglasses,
blurred, unusual colors, carnival make up, dark shaded areas in the face,
baby/kid/adult photographs mixed... Another reason to use that option can be
false face recognition due to a wrong accuracy setting in the
<guilabel>Parameters</guilabel> tab.
- </para>
-
- <para>
- To start the Face Recognition you click
<guilabel>Scan</guilabel>. The process will tag every recognized face with the
appropriate People tag out of your tag tree and the corresponding thumbnail
will disappear from the "Unknown" tag selection.
- </para>
-
- </sect3>
-
- </sect2>
+ &doc-using-mainwindow-intro;
+ &doc-using-mainwindow-imageview;
+ &doc-using-mainwindow-albumsview;
+ &doc-using-mainwindow-tagsview;
+ &doc-using-mainwindow-labelsview;
+ &doc-using-mainwindow-datesview;
+ &doc-using-mainwindow-timelineview;
+ &doc-using-mainwindow-searchesview;
+ &doc-using-mainwindow-fuzzysearches;
+ &doc-using-mainwindow-peopleview;
</sect1>
diff --git a/digikam/using-setup-collections.docbook
b/digikam/using-setup-collections.docbook
index 5eb2be3..2d81a85 100644
--- a/digikam/using-setup-collections.docbook
+++ b/digikam/using-setup-collections.docbook
@@ -2,7 +2,7 @@
<title>Collections Settings</title>
<para>
- This dialog manages your Collection types. Album Collections are
described in detail in the <link linkend="using-myalbumsview">Albums</link>
section.
+ This dialog manages your Collection types. Album Collections are
described in detail in the <link
linkend="using-mainwindow-albumsview">Albums</link> section.
</para>
<para>
