Hi, The is no "Look & Feel" tab in the main configuration dialog anymore. Please, adjust the documentation. The list of affected strings and some other strings with possible mistakes is attached.
-- Alexander Potashev -------------- next part -------------- -------------------- docmessages/extragear-utils/krusader_basic-functions.po:49(#4) # BUGME (obsolete): no Key-Bindings in Konfigurator #. Tag: para #: basic-functions.docbook:27 #, no-c-format msgid "" "This is a rather short but important section that will go into the details " "of controlling &krusader;. This section does not try to cover all the " "various key combinations for two reasons: <orderedlist " "numeration=\"arabic\"> <listitem> <para>there are just too many of them</" "para> </listitem> <listitem> <para>most of &krusader; actions are " "configurable in the <link linkend=\"konfig-looknfeel\">Konfigurator Look " "& Feel page</link></para> </listitem> </orderedlist>We will only mention " "the most important keyboard shortcuts with the default configuration, but " "keep in mind that most of the <link linkend=\"key_bindings\">Key-Bindings</" "link> are configurable. If you find that you use a certain command a lot and " "want to know the shortcut for this command, or you want to change this " "command shortcut, then check out the <link linkend=\"key_bindings\">Key-" "Bindings</link> tab at the <link linkend=\"konfig-looknfeel\">Konfigurator " "Look & Feel page</link>." -------------------- docmessages/extragear-utils/krusader_basic-functions.po:450(#36) # BUGME (obsolete): no "Look & Feel" page in Konfigurator #. Tag: para #: basic-functions.docbook:245 #, no-c-format msgid "" "Use <link linkend=\"konfig-looknfeel\">Konfigurator Look & Feel page</" "link> to change from the default configuration." -------------------- docmessages/extragear-utils/krusader_basic-functions.po:789(#64) # BUGME (obsolete): no "Look & Feel" page in Konfigurator #. Tag: para #: basic-functions.docbook:408 #, no-c-format msgid "" "<keycap>Rename</keycap> the file under the cursor with the <keycap>F9</" "keycap> key or with two single mouse clicks. If only the file name needs to " "be renamed and not the extension, you can configure this in the <link " "linkend=\"konfig-looknfeel\">Konfigurator Look & Feel page</link>. " "<keycap>Create a new directory</keycap> with the <keycap>F7</keycap> key. " "<keycap>Right-clicking on a regular file</keycap> will give you the " "<keycap>option \"New Symlink\"</keycap>. A dialog will prompt you to enter a " "symlink name. That name will point to the file/directory you Right-Clicked " "on. If the file you Right-Clicked on is a symlink, you will also be " "presented with the \"redirect link\" option that will allow you to change " "the link target." -------------------- docmessages/extragear-utils/krusader_bookmarks.po:474(#41) # BUGME (obsolete): no "Look & Feel" page in Konfigurator #. Tag: para #: bookmarks.docbook:275 #, no-c-format msgid "" "If you want, create keybindings for the bookmarks in the <guilabel>Key-" "bindings</guilabel> section of the <link linkend=\"konfig-" "looknfeel\">Konfigurator Look & Feel page</link>." -------------------- docmessages/extragear-utils/krusader_bookmarks.po:487(#42) # BUGME (obsolete): no "Look & Feel" page in Konfigurator #. Tag: para #: bookmarks.docbook:281 #, no-c-format msgid "" "Add your bookmarks as action buttons on the <link " "linkend=\"mainwindow\">Main Toolbar</link> or the <link " "linkend=\"actions_toolbar\">Actions Toolbar</link> with the " "<guilabel>Toolbar</guilabel> section of the <link linkend=\"konfig-" "looknfeel\">Konfigurator Look & Feel page</link>." -------------------- docmessages/extragear-utils/krusader_user-interface.po:188(#18) # BUGME (obsolete): no "Look & Feel" page in Konfigurator # # ???? ????? ????? ?????????? ?? ??????????, ?? ChangeLog'? Look&Feel ??????? ?? Panel. #. Tag: para #: user-interface.docbook:104 #, fuzzy, no-c-format msgid "" "The &krusader; Main Toolbar, is a standard &kde; toolbar that can be dragged " "around the application or configured via a <keycap>Right-Click</keycap> " "menu. You can decide whether or not you want to display it each time you " "start &krusader; in the <link linkend=\"konfigurator\">Konfigurator Startup " "page</link>, and you can toggle its use in the current session in the <link " "linkend=\"settings-menu\">Settings menu</link>. The Main Toolbar contents " "can be configured from the <guimenuitem>Configure Toolbars</guimenuitem> in " "the <link linkend=\"settings-menu\">Settings menu</link> or the " "<guilabel>Toolbar</guilabel> tab in the <link linkend=\"konfig-" "looknfeel\">Konfigurator Look & Feel page</link>. Since various commands " "and options in &krusader; are context-dependent, some commands are not " "always available. The icon of an inappropriate or inactive action will be " "deactivated (grayed-out) disabling its use. <link " "linkend=\"bookman\">Bookmarks</link> can be placed into the Main Toolbar and " "the Actions Toolbar with the mouse using \"drag and drop\"." -------------------- docmessages/extragear-utils/krusader_user-interface.po:283(#24) # BUGME: archive name -> archive type (?) --aspotashev #. Tag: para #: user-interface.docbook:154 #, fuzzy, no-c-format msgid "" "Below the <guibutton>Main Toolbar</guibutton> there is a <guibutton>Location " "Toolbar</guibutton> for each panel. It shows the path the panel is currently " "pointing to. When entering archives the path will be displayed in the " "following format: \"archive name:/directory/archive_filename/the directory " "inside the archive\". This format makes the paths uniform and easy to read. " "The <guibutton>Location Toolbar</guibutton> supports also KIO Slaves but not " "all of them, some can only be used with the <link " "linkend=\"krviewer\">viewer</link> and some can not be used. The user can " "enter a desired path by clicking on it." -------------------- docmessages/extragear-utils/krusader_user-interface.po:317(#26) # BUGME: "KDE control center" -> "System Settings" --aspotashev #. Tag: para #: user-interface.docbook:177 #, no-c-format msgid "" "<userinput> <command>settings:/</command> </userinput>will browse and open " "entries of the <application>KDE control center.</application>" -------------------- docmessages/extragear-utils/krusader_user-interface.po:341(#28) # BUGME: "opens &kde; is trash": typo? --aspotashev #. Tag: para #: user-interface.docbook:193 #, no-c-format msgid "" "<userinput> <command>trash:/</command> </userinput>opens &kde; is trash." -------------------- docmessages/extragear-utils/krusader_user-interface.po:634(#53) # BUGME: "where the path is mounted": you can't mount a _path_, you can only mount a file system. #. Tag: para #: user-interface.docbook:355 #, no-c-format msgid "" "<emphasis> <guilabel>Information Label</guilabel> </emphasis>: shows how " "much free space is physically available on the file system, the file system " "capacity and where the path is mounted. If the information is not available " "(most often in the case of remote file system) a message will be displayed " "with the reason for unavailability instead of the information." -------------------- docmessages/extragear-utils/krusader_user-interface.po:651(#54) # BUGME: add fullstop after "&etc;" (end of sentence) --aspotashev #. Tag: para #: user-interface.docbook:364 #, no-c-format msgid "" "The <guibutton>Media button</guibutton> on the left of the " "<guilabel>Information Label</guilabel> displays a list of all available " "media, where you can select the desired media (hdd partition, dvd, usb-" "stick, &etc;). The context menu gives several options like <guilabel>Mount</" "guilabel>, <guilabel>Open in a new tab</guilabel>, &etc; The " "<guibutton>Media button</guibutton> is <link linkend=\"konfig-advanced\"> " "configurable</link>." -------------------- docmessages/extragear-utils/krusader_user-interface.po:768(#58) # BUGME (obsolete): no "Look & Feel" page in Konfigurator # # ? ?????????? ????????? ????? ???????? ????? ? ???????????? ?????????. #. Tag: para #: user-interface.docbook:446 #, no-c-format msgid "" "When using the \"&kde; default <link linkend=\"konfig-color\">colors</" "link>\", then the selected files are shown in blue and the current file is " "surrounded by a fine-lined rectangle. By default an icon is shown according " "to the file type. Use <link linkend=\"konfig-looknfeel\">Konfigurator Look " "& Feel page</link> to change the default configuration to meet your " "individual needs." -------------------- messages/extragear-utils/krusader.po:954(#152) # BUGME: switch -> option #: krusader/Dialogs/packguibase.cpp:480 msgid "" "Invalid command line switch!\n" "Backslash cannot be the last character" --------------------
