https://bugs.kde.org/show_bug.cgi?id=458863
Bug ID: 458863
Summary: Plasma System Monitor seems not to recognize k10temp
sensors
Product: plasma-systemmonitor
Version: 5.24.4
Platform: Kubuntu Packages
OS: Linux
Status: REPORTED
Severity: normal
Priority: NOR
Component: general
Assignee: ksysguard-b...@kde.org
Reporter: m.bus...@ieee.org
CC: ahiems...@heimr.nl, plasma-b...@kde.org
Target Milestone: ---
SUMMARY
I'm using Kubuntu 22.04.1 with system-monitor 5.24.4
Using sensors I see:
mirto@bianco500:~/Scaricati$ sudo sensors
[sudo] password di mirto:
iwlwifi_1-virtual-0
Adapter: Virtual device
temp1: +36.0°C
nct6797-isa-0a20
Adapter: ISA adapter
in0: 712.00 mV (min = +0.00 V, max = +1.74 V)
in1: 1000.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in2: 3.33 V (min = +0.00 V, max = +0.00 V) ALARM
in3: 3.36 V (min = +0.00 V, max = +0.00 V) ALARM
in4: 1000.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in5: 144.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in6: 824.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in7: 3.33 V (min = +0.00 V, max = +0.00 V) ALARM
in8: 3.25 V (min = +0.00 V, max = +0.00 V) ALARM
in9: 1.78 V (min = +0.00 V, max = +0.00 V) ALARM
in10: 0.00 V (min = +0.00 V, max = +0.00 V)
in11: 576.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in12: 1.10 V (min = +0.00 V, max = +0.00 V) ALARM
in13: 672.00 mV (min = +0.00 V, max = +0.00 V) ALARM
in14: 1.51 V (min = +0.00 V, max = +0.00 V) ALARM
fan1: 0 RPM (min = 0 RPM)
fan2: 666 RPM (min = 0 RPM)
fan3: 563 RPM (min = 0 RPM)
fan4: 1239 RPM (min = 0 RPM)
fan5: 1237 RPM (min = 0 RPM)
fan6: 0 RPM (min = 0 RPM)
fan7: 0 RPM (min = 0 RPM)
SYSTIN: +32.0°C (high = +80.0°C, hyst = +75.0°C) sensor = CPU
diode
CPUTIN: +34.0°C (high = +115.0°C, hyst = +90.0°C) sensor =
thermistor
AUXTIN0: +35.5°C (high = +115.0°C, hyst = +90.0°C) sensor =
thermistor
AUXTIN1: -128.0°C sensor = thermistor
AUXTIN2: +52.0°C sensor = thermistor
AUXTIN3: -1.0°C sensor = thermistor
SMBUSMASTER 0: +39.5°C
PCH_CHIP_CPU_MAX_TEMP: +0.0°C
PCH_CHIP_TEMP: +0.0°C
PCH_CPU_TEMP: +0.0°C
intrusion0: ALARM
intrusion1: ALARM
beep_enable: disabled
nvme-pci-0100
Adapter: PCI adapter
Composite: +31.9°C (low = -20.1°C, high = +83.8°C)
(crit = +88.8°C)
k10temp-pci-00c3
Adapter: PCI adapter
Tctl: +39.9°C
Tccd1: +39.0°C
amdgpu-pci-2d00
Adapter: PCI adapter
vddgfx: 875.00 mV
fan1: N/A (min = 0 RPM, max = 6900 RPM)
edge: +53.0°C (crit = +97.0°C, hyst = -273.1°C)
slowPPT: 5.22 W (cap = 35.00 W)
mirto@bianco500:~/Scaricati$
But, when I edit a page, under sensors -> hardware sensors I see only:
iwlwifi_1-virtual-0
nct6797-isa-0a20
nvme-pci-0100
The[b] k10temp-pci-00c3[/b] is missing
STEPS TO REPRODUCE
1. edit a page and modify a graph
2. look at sensors -> hardware sensors
3. see that k10temp-pci-00c3 is missing
OBSERVED RESULT
No sensors belonging to k10temp-pci-00c3 is viewable
EXPECTED RESULT
see the sensors
k10temp-pci-00c3
Adapter: PCI adapter
Tctl: +40.2°C
Tccd1: +41.2°C
SOFTWARE/OS VERSIONS
Windows:
macOS:
Linux/KDE Plasma: Kubuntu 22.04.1
(available in About System)
KDE Plasma Version: 5.24.6
KDE Frameworks Version: 5.93.0
Qt Version: 5.15.3
ADDITIONAL INFORMATION
--
You are receiving this mail because:
You are watching all bug changes.
