https://bugs.kde.org/show_bug.cgi?id=429331
Bug ID: 429331
Summary: smart properties and test results should be visible
and notify the user
Product: plasma-disks
Version: unspecified
Platform: Other
OS: Linux
Status: REPORTED
Severity: normal
Priority: NOR
Component: general
Assignee: plasma-b...@kde.org
Reporter: luizl...@gmail.com
CC: sit...@kde.org
Target Milestone: ---
SUMMARY
I have a failing disk and give plasma-disks a try. However, according to
plasma-disks, my device was as good as a new HDD. The "SMART overall-health
self-assessment test result" should not be blindly trusted.
I'll paste my smartctl output showing many warning problems like:
1) failed tests. They might not be a final sentence but the user should be
notified
2) repeated failed tests on the same sector: This indicates a even worse
scenario than 1)
3) Reported_Uncorrect increasing
4) Multiple repeating UNC
# smartctl -a /dev/sdb
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.9.1-2-default] (SUSE RPM)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.14 (AF)
Device Model: ST3000DM001-1ER166
Serial Number: Z501MAQ5
LU WWN Device Id: 5 000c50 07bd700c6
Firmware Version: CC26
User Capacity: 3.000.592.982.016 bytes [3,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Nov 18 23:21:10 2020 -03
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 89) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 321) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x1085) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 119 099 006 Pre-fail Always
- 220595456
3 Spin_Up_Time 0x0003 095 094 000 Pre-fail Always
- 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always
- 471
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always
- 8
7 Seek_Error_Rate 0x000f 070 047 030 Pre-fail Always
- 387418648400
9 Power_On_Hours 0x0032 069 069 000 Old_age Always
- 27196
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always
- 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always
- 402
183 Runtime_Bad_Block 0x0032 099 099 000 Old_age Always
- 1
184 End-to-End_Error 0x0032 100 100 099 Old_age Always
- 0
187 Reported_Uncorrect 0x0032 011 011 000 Old_age Always
- 89
188 Command_Timeout 0x0032 100 099 000 Old_age Always
- 0 0 5
189 High_Fly_Writes 0x003a 082 082 000 Old_age Always
- 18
190 Airflow_Temperature_Cel 0x0022 059 052 045 Old_age Always
- 41 (Min/Max 33/48)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always
- 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always
- 3
193 Load_Cycle_Count 0x0032 065 065 000 Old_age Always
- 71480
194 Temperature_Celsius 0x0022 041 048 000 Old_age Always
- 41 (0 19 0 0 0)
197 Current_Pending_Sector 0x0012 090 090 000 Old_age Always
- 1640
198 Offline_Uncorrectable 0x0010 090 090 000 Old_age Offline
- 1640
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always
- 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline
- 23694h+22m+44.043s
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline
- 79812508249
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline
- 11747615309677
SMART Error Log Version: 1
ATA Error Count: 89 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 89 occurred at disk power-on lifetime: 27191 hours (1132 days + 23 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 53 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 ff ff ff 4f 00 04:14:56.788 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 04:14:56.788 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 04:14:56.782 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 04:14:56.782 READ NATIVE MAX ADDRESS EXT
[OBS-ACS-3]
ec 00 00 00 00 00 a0 00 04:14:56.782 IDENTIFY DEVICE
Error 88 occurred at disk power-on lifetime: 27191 hours (1132 days + 23 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 53 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 ff ff ff 4f 00 04:14:53.051 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 04:14:53.051 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 04:14:53.051 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 04:14:53.051 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 04:14:53.037 READ FPDMA QUEUED
Error 87 occurred at disk power-on lifetime: 27191 hours (1132 days + 23 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 53 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 ff ff ff 4f 00 04:14:49.285 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 04:14:49.285 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 04:14:49.285 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 04:14:49.285 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 04:14:49.265 READ FPDMA QUEUED
Error 86 occurred at disk power-on lifetime: 27191 hours (1132 days + 23 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 53 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 ff ff ff 4f 00 04:14:45.545 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 04:14:45.544 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 04:14:45.539 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 04:14:45.539 READ NATIVE MAX ADDRESS EXT
[OBS-ACS-3]
ec 00 00 00 00 00 a0 00 04:14:45.538 IDENTIFY DEVICE
Error 85 occurred at disk power-on lifetime: 27191 hours (1132 days + 23 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 53 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 ff ff ff 4f 00 04:14:42.058 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 04:14:42.058 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 04:14:41.380 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 04:14:41.380 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 04:14:41.380 READ FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Extended offline Completed: read failure 90% 27184
4097844144
# 2 Extended offline Completed: read failure 90% 27182
4097844144
# 3 Extended offline Completed: read failure 90% 27182
4097844144
# 4 Short offline Completed: read failure 90% 27176
4097844144
# 5 Short offline Completed: read failure 90% 27153
4097844144
# 6 Short offline Completed without error 00% 27129 -
# 7 Short offline Completed without error 00% 27105 -
# 8 Short offline Completed without error 00% 27081 -
# 9 Short offline Completed without error 00% 27062 -
#10 Short offline Completed without error 00% 27038 -
#11 Short offline Completed without error 00% 27014 -
#12 Short offline Completed without error 00% 26990 -
#13 Short offline Completed without error 00% 26966 -
#14 Short offline Completed without error 00% 26942 -
#15 Short offline Completed without error 00% 26918 -
#16 Short offline Completed without error 00% 26894 -
#17 Short offline Completed without error 00% 26870 -
#18 Short offline Completed without error 00% 26846 -
#19 Short offline Completed without error 00% 26822 -
#20 Short offline Completed without error 00% 26798 -
#21 Short offline Completed without error 00% 26774 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
--
You are receiving this mail because:
You are watching all bug changes.
